/https://fbi.cults3d.com/uploads/user/avatar/15486704/354576399_6267434559976317_2970329640218483760_n.jpg "Breakrebox")
I create 3D printable props and armors for cosplay.
Lychee Slicer Ambassador
Get Lychee pro with my link below:
https://c3po.link/QBuysB2Wn8
👋 Ciao a tutti! Questa conversazione è pubblica, quindi manteniamo un atteggiamento gentile e rispettoso. Niente pubblicità, spam o cose sgradevoli!
🇺🇸 Paese dell'utente: Stati Uniti
🌐 Lingua preferita del membro: Inglese. Puoi tradurre online tramite DeepL.
💡 Ti riferisci a un modello in particolare? Aggiungi il link, il titolo o il numero del modello.
🖼️ Vuoi pubblicare delle foto? Utilizza un host gratuito come ImgBB e incolla i link nel messaggio.
✍️ Suggerimenti per la scrittura: utilizza il formato Markdown per strutturare il testo e renderlo più leggibile.
Good morning, could you instruct me on how I am supposed to put this together? I am trying to print this out for my son before Halloween. Do I purchase a bodysuit and glue the pieces onto it? Or do I see the pieces on? Do you have a YouTube video that could guide me. Thank you.
which armor set? if you are referring to the kingdom hearts armor sets, for the most part I attached Velcro to the suit and to the back of the armor plates if you dm me on my Instagram I can show you how my current broken will suit is made. it will also have a ton of videos of my processes. https://www.instagram.com/breakreboxcosplay/
Hello, this was a wearable model?
all of my cosplay models are wearable
Hey hope all is well! I just downloaded the terra's broken will armor and just had a couple of quick questions on it. It says that it's scaled for someone who is 5'10", but I'm 5'11", so would it just be a matter of scaling all the parts a certain percent, or would I have to do something specific to the parts? The helmet size is also fine, but not sure if the length of the piece would have to change or whatnot. Thank you!
the height will be fine, I'm also 5 11. 5 10 is just the more common height
Thanks for the response and awesome work on this. Terra's my favorite character, so it's really great to see the amount of time and effort that went into such a cool model and cosplay!
I also forgot to ask, but where did you get the custom undersuit designed for the cosplay? It also looked really good!
the pattern for my first suit came from renwick.design and printed at printcostumes.com
hi was wondering if u sell broken will just the helmet i just printed ventus found it a awesome print
thank you
Sure! I can do that, I'll let you know when it's up.
Thank you ur awesome
sorry about the delay, got sick and forgot
Hope u start feeling better will buy it wen my computer is working
Hello, I was curious if I could commission something from you. If so, my email is benjaminrogers6561@gmail.com If not, understandable and have a nice day. :D
How much infil for the mk v zeta model?
Hey there!
I bought your Orphic hammer design and there was nothing in the folder after I unzipped it. I tried to DL it again it it was still empty.
testing it i did not have any issues. inside the main folder should be another called Breakrebox and then another folder inside that one called orphic-hammer-baulder-s-gate-3. the stl's will be there
if they are not there then give me your email and i will send them to you directly
Ill try redownloading it and see if it shows up again!
Yeah, I go to open the folder orphic-hammer-balder-s-gate-3 and it says the folders empty. Not sure whats going on my end. My email is danivharrison2@gmail.com , I appreciate your sending the files! Looking forward to printing, it looks awesome. :D
Hey im wanting to use your helmet to advertise my small cosplay business im not tonna make any money by selling it, ill be giving it to a streamer as a gift would i need to pay you for this? Contact me if interested
you don't need to pay me for that, just make sure it has accreditation for the model
Hey, I recently used your hell cat armor design but have had to split a bunch of pieces into smaller pieces to fit on my small 3d printer with it being only an ender 3. The chest piece and the back plate have been the only parts I can't seem to fix to fit on my 9x9 printing bed. I use tinkercad to split them into smaller pieces to fit on my printer but the file is too large. Do you have a smaller-sized file for those two or a way of making it smaller? The file has to be smaller than 25MB. I would really appreciate it! I would hate to have gotten so far and can't use it because of the two major pieces. I really love the stuff you do.
Good morning/evening
I just got your Invader Zim model, and I was trying to print it on my Kobra Max. It got through the first layer beautifully and then the hot end would raise like it was trying to print a higher layer. I tried to print it 3 times and even redownloaded the file to make sure it didnt get corrupted or something. Have you had any issues or have an idea that might let me print your awesome model of Zim? Also do you have a file for zim that is sliced up, so we can print large versions on him?
Thank you
I have uploaded a fresh model. Double check your layer height and first layer hight settings, sometimes when I print something I'll think I changed it to .2mm or something but when I look back it's set to like 20mm. as for a broken up version, I can do however as this was made so long ago I will need to rework it a bit
Hey! I recently got your free ISR file and I modified the model for mega construx figures with a friend. I’ve had a lot of people ask for the pieces and was wondering if it’d be ok if I sold the printed parts? Or at the very least had permission to send them to people to paint, friends, etc. thought I’d ask, thanks for the dope helmet either way!
Hello! I had a question about your Destiny Titan armor set. How would I go about scaling it for my body in particular? I know there's some software but I want to avoid paying for software just to scale. I tried using Cura, but wasn't too sure how to use it to scale.
best way to scale without software is to cut a slice of the armor piece you need then use that as a test fit. Keep in mind pieces like the lower legs and arms are 2 parts so both parts need to be scaled together you can cut models up in mesh mixer or prusaslicer
Hi, do you make custom pieces? I would like to know the value for the armor model of darius from league of legends, default skin, the axe I already have.
this is something I'll have to get back to you on. I'm going through this whole restructuring thing after coming off a long hiatus. Everything's kinda up in the air right now
Hey! I know it's a long shot, but I stumbled across your405th thread and saw your Regulator Mounting set-up. Did you happen to still have the files for that somewhere? I'm currently printing the second Regulator and the Helmet is soon after, I was hoping I could use the files you made for when I put it all together!
unfortunately i do not have the original files anymore, hard drive got fried. I plan on remaking them and picking back up on the mesa prime cosplay this year
Awesome, can't wait to see the progress!
Will you be makeing the shoulder armor for ventus,Terra and aqua when they don't have the full armor active
in the future, however it's further down my list
Hey anyway I can have permission to sell this?
I'm sorry, but no
Anyway you could split the helm of terra into 3 parts ?
I purchased your Jenny set and I'm really impressed by your interpretation! I'm going to start printing them off very soon, but I'm already very excited to see how she will turn out. The only nitpick I have from a creative standpoint is that you didn't include her wings in the flying stance; I don't know if this was deliberate or accidental, but I think her pigtail engines lit up is enough to convey the idea so it's not a major complaint.
Ever since I posted on Twitter that I was planning on printing these off, I've had multiple people offer to buy them from me, but I've been hesitant to say yes because I don't know if you would approve of that or not. Even if you did, it would only be on a person-by-person basis, and not actively selling them to people. If you say no, that's completely understandable; hell, if you want I could direct them straight to you instead so you could sell them yourself. Just let me know and I will go from there.
Thank you for your purchase! At the time it was deliberate as I was working on a posable figure with interchangeable parts and accessories. However due to circumstances at time and personal issues, I was not able to finish it. If you don't mind sharing your twitter I would love to follow and see how they turn out.
I would need to know how much you are selling them for before I can agree. Personally I would prefer if they bought the model from me first then commission you for the print. However If the price is fair I do not mind if you wish sell a few of the printed figurines if requested, as long as I am properly accredited and no more than 5 figurines total. Any sales over that and we would need to work out a deal.
Currently I am not in a position to sell my own prints as all 3 of my printers are down
My Twitter can be found here! http://www.twitter.com/retsofnoraa
I've already done a test print of the Combat Jenny, so I'll upload that on there soon. I'm still learning with this stuff, though, so it'll be a while before I'm satisfied with how well I can do it.
"Personally I would prefer if they bought the model from me first then commission you for the print." That sounds like a perfect idea to me!
Hi!, how much $ will it cost me to encourage you to make the war master halo 5 armor!, :D rubiogomez101@gmail.com
/https://fbi.cults3d.com/uploads/user/avatar/20853032/Rex.jpg "3DTREX")
Good afternoon. I messaged you on thingiverse a few months ago about if I could sell your halo infinite firefall helmet on Etsy with your premission of course. Just wanted a little more info about that. Thank you:)
Sorry, I responded to it about a month ago, I don't know if you got it.
Due to unfortunate life stuff I made the decision to monetize my models. All my tested models and future models with be for sale here on Cults3d. I will eventually migrate all models here once testing's are revision are done
I'm fine with you selling prints (with proper attribution for the model)of since I do not have plans of selling physical prints myself (too much hassle). You just have to print me one. I've gone ahead and created code "firefall" for you to use on check out to get the model for free. please let me know once you have used it so i can deactivate it
I just acquired the firefall file so you can deactivate the code. And hey man I really do appreciate it. I'll definitely make you one. For sure. Also FYI forgot to mention but I am in partnership with Precision props on Etsy. We'll make you the first one. Message us there and we can make a listing for you to get you, yours for free:)
cool, thanks. I just sent a dm to the etsy page