Aller au contenu

Attention les amis, il ne s'agit pas d'une messagerie privée mais bien d'un fil de discussion public. C'est un lieu d'échanges, merci de rester courtois et respectueux. Toutes sollicitations commerciales ou malveillantes sera supprimée. Si vous évoquez un design en particulier, n'hésitez pas à ajouter dans votre message le lien ou à donner le titre du modèle afin que la conversation puisse être correctement orientée. Si vous souhaitez joindre des photos au sein de votre message, n’hésitez pas à téléverser vos images sur un service d’hébergement d’images en ligne gratuit comme Imgbb et à copier / coller les liens de vos images dans votre commentaire. Bonne discussion !

Écrivez votre message :

63 commentaires

Hi, the dragon is very nice, but the joints at my tail and head are breaking, can it be fixed somehow?

Hello, I've already made several updates to this file, and these problems have already been resolved, if it still happens to you, it may be some configuration in your slicer or the quality of the filament used.

Hi! Can this file be used with a resin 3D printer?

I forgot to mention which file. I was specifically looking at the crystal dragon.

hello yes it works

  • 1 j’aime

Hello,
i was wondering if you made the dragon, you can make one that doesn't have scales, just plain , so i'm able to make latex skin and add to it.
thanks

your design is in https://www.thingiverse.com/thing:5341516

Thanks so much for letting me know about this.

I have already contacted Thingverse to have the content removed.

is it possible to print the crystal dragon within the Y14-X14 3d printer with out the joints snapping of?

Honestly I've never tried to print it this size, so I can't tell you if the connections would break or not.

What I can tell you is that if you are going to try to print it this size, put a high padding, 50% or even 100%.

I am having a problem with the crystal dragon it doesn’t want to print right I have tried 4 times now

What kind of problems are you having? What happens when you try to print?

hello mate just with this dragon do you have the settings on brim or skirt??? man question im very new to 3d printing

Well, I use Ultimaker Cura's default settings.
You can use brim or skirt, or print glue.

Hello, I have recently bought your crystal dragon print and sadly i can not get it to print for the life of me. Is there anything particular you did that might help it print better?

I performed the printing, using the standard settings of the Ultimaker Cura slicer.

I recommend using a low print speed, 15 - 20 mm/s,

You can use raft if necessary, or a glue for printing.

  • 1 j’aime

I tried that, But the tail still won't print, everything else seems fine though

Can you attach an image of what is happening on the site?
https://imgbb.com/

For me to better understand the problem you are having, to try to help you.

I just had to add rafts and it worked.

Ok, thanks for your feedback

Hola!!!
Muy buena tarde, disculpa, compré el dragón de cristal flexible pero el link de descarga parece estar dañado, no me permite bajarlo. ¿Pudieras darle un ojo? Gracias.

Hola,

Revisé el enlace de descarga y todo está en orden.

Intente descargarlo nuevamente, si no puede, intente comunicarse directamente con el soporte del sitio web.

I have the ender 3 and cant get this to print right what settings should i use

for the crystal dragon

I performed the printing, using the standard settings of the Ultimaker Cura slicer.

I recommend using a low print speed, 15 - 20 mm/s,

You can use raft if necessary, or a glue for printing.

  • 1 j’aime

Im sorry I know you get this question a lot would it be ok if I sold your crystal dragon as a 3d print I will never sell the digital file as that is wrong but I just want too ask :)

Sure, feel free to sell the physical model, I don't mind that.

  • 1 j’aime

Hello.
I have bought Kaido and noticed an issue with the flexibility. I have scaned the model and found an error. I have tried to correct it myself. Would you like to receive my files? (sry for my bad english^^)

Thank you very much for your support, I will look at the model right now and try to fix the problem, thank you very much for your feedback.

I’ve printed your crystal dragon a couple of times now. The tail has a section that doesn’t complete and isn’t connected after printing.

  • 1 j’aime

Hi, I updated this model a few minutes ago, please download the new file and test again.

Did you address the tail section issue directly? If not, no point in wasting The filament.

Yes, the model was redone from scratch. Please do a new test.

Hallo,

ich habe die Datei heruntergeladen und im Prusaslicer (Standart-Stock) geladen. Das Design bringt mir 4472 offene Kanten. Reparieren nach Netfabb dauert nun 2h und ist nichtal bei einem Drittel....

Gibt es diese Datei auch "Repariert" ???

Bitte machen Sie einen Test auf Ultimaker Cura, ich weiß, dass dieser Slicer gut funktioniert, da die anderen Slicer wirklich Fehler zeigen und ich arbeite daran, dieses Problem zu beheben.

Ich werde die Datei auf der Website in den nächsten Tagen aktualisieren.

Hello there. I purchased the flexi crystal dragon file and have printed a few of them. I wasn't aware of the license when I bought it. Is this something I am able to sell my prints of?

I don't have a problem with you selling physical copies, just don't sell or share the digital model, okay?

i have problem with the FlexiCrystalDragon-fix. is has too many open edge. fix this plz

Which slicer are you using?

Please do a test on Ultimaker Cura, I know that this slicer is working fine, as for the other slicers, they are really showing errors and I'm working to fix this problem.

I have printed in simplify3d i got terrible details and my printer is tuned. Now I am trying to print with superslicer and I get error to many open edge. I have re-download the model same thing

As I said, I tested and printed some models in Ultimaker Cura, and it was ok, but in the other software, there are really loose ends, I'm working to fix this problem, and I'll update the site in the next few days.

I'm sorry for the inconvenience.

OK I will wait for the update. Tnx

hey would i be able to make and sell the ARTICULATED DRAGON - FLEXI CRYSTAL DRAGON 3D PRINT model?

  • 1 j’aime

I don't have a problem with you selling physical copies, just don't sell or share the digital model, okay?

yeah no worries would never share the files just wanted to make sure you were good with me selling physical coppies

The crystal dragon file gives a fix error code. can you send me the updated file?

Which slicer are you using?

Please do a test on Ultimaker Cura, I know that this slicer is working fine, as for the other slicers, they are really showing errors and I'm working to fix this problem.

She Hulk ni free support

Hello, She Hulk only needs chin support, the rest of the body is not necessary

She Hulk ni free support

Hello, I purchased the crystal dragon, and I have had a few failures, some of which were my issues (filament wound incorrectly, bed leveling), and it was driving me crazy, so I reloaded into Cura, and got a missing or extraneous surfaces error. I also realized that no matter what I did, whether it be just trying it straight from opening, or resizing or moving the model around, there appears to be some area that is below the print level (my apologies I am newer to 3D printing, but that's what I can gather, they are dark blue in preview mode) and the missing error continues to appear. I have tried slicing and printing at 0.1, 0.15, 0.2, 0.25 layer heights all with the same issues.

Hello,
I bought the "ARTICULATED DRAGON - FLEXI CRYSTAL DRAGON 3D PRINT" sadly the print program crashes whenever trying to open the file. Also on another printer it crashes. Any solution?

The model is quite heavy, here on my computer I can open it normally in the Cura slicer, I haven't tested it on other slicers yet, it works on my ender-3 pro.

Try opening it in Cura, if it doesn't work I can try to make the model lighter.

Thanks for your support

Hello, I am a student in South Korea who designs with Zbrush and uploads it to cults. I would like to hear about your dragon design method. I'm curious about how the joints are made, how to align them with Z-Brush... etc. I've uploaded 20 dragon models and flexible models so far, but I'm upset that there is no response.

My design method is to create a joint, copy and paste it, and then modify it by adjusting the angle. It is inefficient and difficult

hello,

do you make custom request.

Surely, what do you have in mind?

Some type of anime like the characters off boondocks.

ok, here at cults we don't have a tab where you can request a project and send me references, can you send me a message on cgtrader? I usually do custom orders there.

https://www.cgtrader.com/leonecastro

Hi there I bought your stl "Kaido" and I am unable to upload it to any Slicer. Any suggestions?

Hi! Try downloading them again, some files get corrupted while downloading. Hope it helps