Aller au contenu

Attention les amis, il ne s'agit pas d'une messagerie privée mais bien d'un fil de discussion public. C'est un lieu d'échanges, merci de rester courtois et respectueux. Toutes sollicitations commerciales ou malveillantes sera supprimée. Si vous évoquez un design en particulier, n'hésitez pas à ajouter dans votre message le lien ou à donner le titre du modèle afin que la conversation puisse être correctement orientée. Si vous souhaitez joindre des photos au sein de votre message, n’hésitez pas à téléverser vos images sur un service d’hébergement d’images en ligne gratuit comme Imgbb et à copier / coller les liens de vos images dans votre commentaire. Bonne discussion !

Écrivez votre message :

9 commentaires

Hi there, I purchased the Log Cabin stl files. I can't get the files to sit properly on the print bed due to the combined pieces being at different heights. How can I fix this? I can provide photos from cura slicer to show the issues i'm running into. thanks.

Hello, after checking I see no issue in the geometry, but I think the thing is to enable printing supports, that You might have disabled.
Anyway for better orientation please send me the cura screens to my mailbox: contact[at]euroreprap.eu
Thanks

please send me the stl files for the 51 chevy pickup to my email send them as stl files not zipped.. i un zip and there are no stl folder. send them to hurtruby.com. i am very upset i cant print no files in folder after i un zip. make sure they are stl. thanks doug

Hello, sorry to hear zip didn't work in your case. Of course in a moment will send you link for replacement, also upload RAR version.
Best regards.

Hello, I can't see your e-mail anywhere, please send it to my mailbox: contact[at]viggens.com or via Fb Messenger so I can pass you the replacement link.

Hello, thank You for the purchase,
Generally the ERS (Euroreprap Railroad System) is not "0" or "H0" linked, however the files are scalable to some extend.

..I'm just finishing modelling the re-issued version of this semaphore, strictly for "H0" (height = 105mm, but only for SLA/MSLA resin printers).

Can You tell me which scale do You need this semaphore to fit into?

Best regards

Hello, thank You for the purchase,
Generally the ERS (Euroreprap Railroad System) is not "0" or "H0" linked, however the files are scalable to some extend.

..I'm just finishing modelling the re-issued version of this semaphore, strictly for "H0" (height = 105mm, but only for SLA/MSLA resin printers).

Can You tell me which scale do You need this semaphore to fit into?

Best regards

Ma Da

Mer 02-12-20 13:01

À : Hugo [Cults]

Hello

I bought you an STL file of the semaphore whose measurements are 84x92x283 mm but which is for me of the O, because normally the semaphore for the HO is 27x70x125mm, there is a difference between the two, I attach a photo for you shown.

Regards

Bardiaux Daniel

Je voudrais vous signaler la création “Semaphore-01 pour le système ferroviaire Euroreprap” à l'adresse https://cults3d.com/fr/mod%C3%A8le-3d/divers/semaphore-01-for-euroreprap-railroad-system

Explique-nous la raison --> Pour moi je pense que ce n'est pas la bonne échelle 1/87éme , la hauteur dois être pour moi de 125mm.

Hello

I bought you an STL file of the semaphore whose measurements are 84x92x283 mm but which is for me of the O, because normally the semaphore for the HO is 27x70x125mm, there is a difference between the two, I attach a photo for you shown.
Regards

--
Création Semaphore-01 pour le système ferroviaire Euroreprap
Signalement #4036
Les Robots de Cults.

Hello Good day, I made a purchase of a tradable version, but in the description it says not tradable, you can send me an STL where I can duplicate the file, thanks

Hello, please send me your email address (to my contact(at)euroreprap.eu) mailbox, so I can send you private download link.
Maybe this will be the solution.

(My stls' have no access restrictions BTW)

Best regards
Wojciech

I bought the ERS locomotive off Cults and when I open the STL files it says i dont have permission to open the files, can you please help me sort this out??