81 commentaires

hello, I tried to open here and it's working perfectly. Have you tried opening it with another slicer? I don't own the lightest model. You can also try opening it in chitubox, then make the changes you need and save again with a new file, see if it opens. Sometimes the file gives some incompatibility errors with other programs, but doing this usually solves it.

sorry I didn't understand the question right, do you want to see his image or the STL file? You can find both in his link below: https://cults3d.com/en/3d-model/game/gus-sweet-tooth-netflix-funko-pop

I meant the cardboard box image (in the 3rd photo), for putting the Funko Pop in, Sorry for the confusion.

ah, I understand, the file does not come with the box. The box is only available to Patreon subscribers on the Premium plan. Take a look at my website, https://www.patreon.com/deslimjim

Obrigado, sim, fiz o Manoel Gomes e o Dollynho. Tenho mais de 300 modelos e alguns estão com desconto no patreon, não são todos modelos que estão lá, mas tem bastante coisa, dá uma olhada no meu site https://www.patreon.com/deslimjim

Olá, obrigado pela mensagem. O valor do Ash é R$ 28,00. Ele não estava em desconto, provavelmente o valor do desconto deve ser dado pelo próprio Cults3D.

Hi, sorry but I don't know what site this is. I don't have any files on this site. My files are only sold here on Cults3D and I have patreon. Anywhere else is not mine, avoid buying from these other sites as they may be fake.

And I don't have this "PC CASE MINI ITX" file. Is not mine.

https://cults3d.com/en/3d-model/various/pc-case-mini-itx-oslodesign0
I went to your account from a comment under this model. IF I KNEW YOU WANTED COMMENTS, I WOULD SCREEN!!!

???

sorry but I didn't understand what you mean. This model is from another modeler. Chat directly with him.

Hello, at the moment we do not have the Smurf Funko model. Follow us for future releases.

Hello, no. We have a plan on Patreon (Premium plan) where you get the custom box along with the model. take a look at the link https://www.patreon.com/deslimjim

Hello, it is common for some files not to be fully compatible with other programs, as it is impossible for a modeler to create a model that opens and works 100% in all programs. In that case, be sensible and contact us with your problem, it will be a pleasure to try to help you to get amazing 3D prints. And please don't SPAM messages about the same issue. I already read your question. Avoid being reported and banned from the Cults3D community. Read the Cults3D rules and if you have any questions, I'll be happy to help. Thanks

Hello, I tested it here and the file is working perfectly. I made some adjustments and I believe it will now open normally for you. Please, just download the file again. The file is complete and not thinly layered, it's tidy. thanks

I already changed Gary's file (Final Space). It's correct. I've tested it and it's working. Just download it again. Any questions let me know.

Hello, orders are made by commission only. If you want to receive a quote, please get in touch via instagram dm. thanks

Hello, at the moment I am only placing orders through commission. In this case, the value is totally different because it will be necessary to do it according to the customer's decide. If you're interested and would like a quote, send me a private message on Instagram, I'll send you the quote there. My instagram : https://www.instagram.com/deslimjim

Hello, sorry the file is already finished. The files that are made separately are described in the character details in Cults3D. You can separate the model using programs like Windows 3d Builder which is free.

Hello, sorry at the moment we don't have any characters from this anime.

Would you be likely to do any in the future do you know? Thanks

Yes, probably. At the moment I have many projects in progress and some commissions, so I don't have a deadline to carry out other projects. But in the future, I might think about making some characters. Thank you for the indication, I will analyze this anime and get to know it better. Have a great day.

Thanks for getting back to me that's great I'll keep an eye out in the future then. Yes really good anime you should get into although mikey and draken are not the main characters they totally steal the show

Hello, first of all thank you for your purchase! Normally I don't make the head separate from the body just to save on resin or filament, since you only print 1 file. Many prefer it to be separate to help with painting. But all my prints are done together and I can paint normally without any difficulty. I believe it is more practical than possibility. Also, making the head separate ends up taking a lot of time, as it is necessary to close each part and place pins. It is usually a service that I charge for when the customer buys on a commission basis. About the file being too large in scale. It varies by slicer. For example, if you open it in the Chitubox program (as indicated on the cults3d page) the model will be too small. There is no way to make a 3D model that fits all slicing programs. Closing a file for Cura is different than Chitubox for example. But the file works on all slicers. Just configure. What you can do to fix this is to open it in chitubox, set the scale and save again. This procedure usually resolves this bug. All my customers were able to print, some did it and informed me that it solved it. And your opinion doesn't bother me. Thanks for sharing your tips and ideas. I'm sure if I can improve, I'll do it. If you are still having problems or difficulties printing, let me know. I will try to help. And I'm already making some models with the head separated from the body, such as the minitoy models that are on my cults page, all are already made separately. Thanks again for getting in touch. I hope I can help more in the next models. Cya buddy =)

Hello, at the moment I am not taking commissions, I have a closed schedule until the end of January.

Hello, it is common for some STl files to be incompatible. Try to open the file in the Chitubox program as instructed. Make changes like scaling etc and then save again as STL. After doing this, try to open it in the program you want, see if this fixes this bug. I did the test here and the file is opening and working perfectly.

Hello, I'm not currently taking commissions. As soon as I get back to order I'll let you know. Thanks =)

Hello, there is no way to know, because there are many variables. It depends on the resin brand, its viscosity, the size of the piece you are going to print, the amount of supports you will place on the model, if the model will be hollow or completely filled, if it is hollow, you need to know the thickness of the edges, and the internal support. There are many variables. You can put a similar model in the chitubox program, configure all the elements mentioned above to your preference and try to slice it to get an idea.

Hello, on the % side you have the mm field. just put the measure you want in millimeters and the program will show the % automatically.

in this vain , your model seems to be partially hollow , any way to re-upload it as a solid model for resin printing so i dont need to put holes in it ?

Hello, which model are you having problems with? Please let me know and I will check for you.

Hi CMMILBY I update the Naruto Sage Mode, please download again, I fix the problem. thanks a lot

Hello, I do not provide authorization to sell the products. Models are for personal, non-commercial use only.

Hello, please try to open the file in the Chitubox program, change the parameters like scale, etc. Then save in the format you want and try to open in another slicer. It often happens to cause incompatibility with other programs. I just opened the file here and everything is working perfectly.

Hello, our files are for your own use. But if it's a small amount for your friends, no problem.

Thank you

Hi, I'll check the file, just a moment.

I looked here, the file is right. Inside the STL folder there are 2 files, one for the base and one for the model. Try opening it in the Chitubox program, configure the scale you want and save again in the format you want. Sometimes the CURA program or another slicer usually gives incompatibility.But it's all right.

Hi, I'm getting a lot of requests lately. As soon as I can meet everyone, I will make more models of pokemon and Dragon Quest.

Hi, I'm getting a lot of requests lately. As soon as I can meet everyone, I will make more models of pokemon and Dragon Quest.