Aller au contenu

Attention les amis, il ne s'agit pas d'une messagerie privée mais bien d'un fil de discussion public. C'est un lieu d'échanges, merci de rester courtois et respectueux. Toutes sollicitations commerciales ou malveillantes sera supprimée. Si vous évoquez un design en particulier, n'hésitez pas à ajouter dans votre message le lien ou à donner le titre du modèle afin que la conversation puisse être correctement orientée. Si vous souhaitez joindre des photos au sein de votre message, n’hésitez pas à téléverser vos images sur un service d’hébergement d’images en ligne gratuit comme Imgbb et à copier / coller les liens de vos images dans votre commentaire. Bonne discussion !

Écrivez votre message :

18 commentaires

Hey, do you allow repo for a 3d printing online shop, with a commission based approach? do you have 5 to talk it through.

Sure. How can I contact you privately?

Hey drop me a message on my Facebook page
https://m.facebook.com/3DEmporiumuk/

Hey drop me a message on my Facebook page
https://m.facebook.com/3DEmporiumuk/

Hi there, do you have any plans to design any other components for the interior of the millenium falcon to go with the Star Wars Dejarik Table & Seating for 3.75" figures you offer on here? I'm looking also for the bunk that goes behind the seat, the grate floor, and back wall where the entrance to the corridor would be. Please let me know, thanks.

Not anytime soon, unfortunately. I'm going to be tied up for a few months, so I won't really have time to work on a lot of new things. Thanks!

I was wondering if you made the top of the forge?

I haven't yet. I should be getting around to it in the next month or two. Thanks!

How do the death star walls attach to each other and stand up? It seems like I'd need another part.

They are intended as detail pieces or paneling; you would need to build a separate structure to attach them to.

Hello I love your work! The one piece in particular the code my attention was Kamino I would love it if you made me the rest of the room pls are you open to commissions?:)

Thanks so much! I'm afraid that I'm going to be really busy for the next few months, so I'm not going to have a lot of free time for other projects.

Hello,

I just bought your cantina set, but the cantina counter is too big for my bed, is there any chance you could split it into s sections for me?
Thank you,
Brad

The dispenser counter, bar or both?

Just the bar please.

Added new files for the split bar. If you have any trouble downloading them let me know, and I'll send them to you directly. Hope this helps; let me know if there's anything else I can do. Thanks!

Hey there Harvey, hope this message finds you well. I love your star wars 3D dioramas, great work which I've purchased 2 already. I have a request for you which I would gladly donate to you to start and should be easy. I'd like to complete the 'Star Wars Mos Eisley Cantina Diorama for 3.75" figures set' and would like you to produce a 'Corner booth' CAD for the other side that I could purchase for download.

Also I'd like to ask if you can produce a 3D model for the top half of the distillery bar such as in the pic here:

https://www.ebay.com/itm/253196541373?mkevt=1&mkcid=1&mkrid=711-53200-19255-0&campid=5338722076&toolid=10001

And last could you also produce a 3D CAD for the front entrance area of the mos eisley cantina as well? Below is an example:
https://www.flickr.com/photos/boutros77/11967897026/in/album-72157629883274514/

Thank you for your consideration in this matter.

Thanks for the suggestion, and for the downloads.

I've thought about doing something similar to this before; though it will probably be a while before I can get to it. It's relatively straight-forward, but will take time that I don't have right now.

Hi there,

I just purchased the Lars Homestead files. Could you please seperate the "Lars Dome Parts" file so I can print each part individually? Some parts seem to be overlapping (like the one bottle and the entry part).

Thanks so much in advance

  • Steve

Thanks for pointing this out. Sorry, I don't know how I missed that. The parts file has been separated into two files to allow for more room for each item. Let me know if there's anything else I can do. Thanks again!

Hey any chance you will be making any more of these wall panels? Thanks.

I probably will, sooner or later. Which ones were you interested in? Thanks!

Curious if this would scale up to 1:6 decent or curious if you've tried it.

Which do you mean?

i was interested in the mustafar mining platform if you have tried to scale it up to bigger figures by chance. think they are 12 inches tall the Hot toys ones

I haven’t, but I don’t see any reason why it wouldn’t work. Some of the proportions will probably be off a bit, though.

Hi Matt, There should be 2 bases and a file including all five terminals (named Death Star Consoles (5)). This is the first I've heard of an issue like this, and this model is one of my most downloaded. I can only assume that the site is having some kind of problem. Try them again, if you can, and if that doesn't help, send me your contact information and I'll email the file to you directly. Thanks so much!

Dir Sir, I bought your Star Wars Death Star Detention Block Control Console for 3.75" because I like it very mutch but I only get the base and one of the 5 Terminals. Where are the other 4 Terminals like on the pictures? Kind regards Matt

Thank you so much. I was actually going back and forth on whether to do those or the light. I'll probably get around to the tanks in the next couple of weeks.

Excellent work you have done. I really like your 94 hangar light design. Another idea for a design would be the yellow tanks on the floor in docking bay 94. Think there are two tanks side by side in the set photos I've seen.

Hi again, I'm being asked by several of my customers if I can buy some of your files and print them for them. How does this work? I don't want to just buy your work and print it without permission. As that's totally unfair on you and I can't stand people selling people work without permission or credit to the original designer. Can I sell them a print?, once I have bought the file from you? Some designers allow multiple purchases, some don't. I have some arrangements with other designers so they get credit and funds for their designs. but wanted to see if you are interested in me printing and selling some of your pieces and ensure you get credit. Mark

I'm going to be pretty busy for the next few months. What are you looking for? Thanks!

Do you take request for making specific designs?