Aller au contenu

Attention les amis, il ne s'agit pas d'une messagerie privée mais bien d'un fil de discussion public. C'est un lieu d'échanges, merci de rester courtois et respectueux. Toutes sollicitations commerciales ou malveillantes sera supprimée. Si vous évoquez un design en particulier, n'hésitez pas à ajouter dans votre message le lien ou à donner le titre du modèle afin que la conversation puisse être correctement orientée. Si vous souhaitez joindre des photos au sein de votre message, n’hésitez pas à téléverser vos images sur un service d’hébergement d’images en ligne gratuit comme Imgbb et à copier / coller les liens de vos images dans votre commentaire. Bonne discussion !

Écrivez votre message :

58 commentaires

Hi
I bought the m chassis wheels for porsche.
Is it possible to get the fusion data?
Because the wheels are to thick for my car.
On the inside it need 1.5mm more space to work free.
Im happy with the wheels and i wish you best health.
The data would only for me.
I will make them to run freely, a remix you can call it

Здравствуйте. Извините не могу приобрести с России

Здравствуйте, тогда России лучше закончить войну с Украиной!

Hallo, dann sollte Russland wohl besser den Krieg mit der Ukraine beenden !

Войной в всё решается и решится Украина сама виновна!

Здравствуйте, вы должны сказать это не мне, а всем матерям и отцам бессмысленно погибших солдат в обеих странах. Не говоря уже об убитых мирных жителях и детях.
Я молюсь за мир, свободу слова и свободную от пропаганды информацию.

Hallo, das solltest du nicht mir sagen, sondern lieber allen Müttern und Vätern der sinnlos gestorbenen Soldaten in beiden Länden. Von den getöteten Zivilisten und Kindern mal ganz abgesehen.
Ich bete für den Frieden, freie Meinungsäußerung und propagandafreie Informationen.

Поскольку ситуация не позволяет оплатить из России, я не хочу утаивать файлы от вас как от строителя моделей.
Пожалуйста, пришлите мне свой адрес электронной почты на:
veloking@web.de

Затем я бесплатно вышлю вам необходимые файлы.

Приветствую, Олли

about the bronco body, can it be printed for the 324 model?

Hey, on the 3D printed bronco doors, what hinges did you use?

Hey
Would it ne possible for you to make wider fenders? I have the Trx-4 Bronco 2021 but i need wider fenders for my new tires.

How much mm on each side ?

Stock is 15mm so i would say 20mm each side

New set of fenders added. +5mm, +8mm and +10mm on each side. Have fun ...

The model is quite good, but the thin walls on the front part are pain to work with!

Sorry to hear. But it's the first time that i got a negative feedback about the front part. I printed it several times ... everything fine. Even the thin walls of the grill.

Thanks for reply, I'm still learning the tricks of 3d printing, but my slicer is just ignoring the very front part of the body now matter what.

Hi, about Porsche Fuchs rims, may you get for standard 1/10 drift/tourng?

I mean 52mm diameter

Hello, the cab is only made for the FMS RocHobby Willys.
Will it fit on the 1/6 Dragon ?
You have to compare the measurments and size of the bodys by your own.
I'm not able to do... No Dragon, sorry.
Cheers, Olli

  • 1 j’aime

Hi. I have the 1/6 scale Jeep from Dragon and wonder if your rooftop will also fit this specific body. Thanks

Hey there! I purchased your FC Jeep model and it's awesome! I was curious if you had any mounting pictures or suggestions for how to make it fit the SCX4 or for an SCX24 scale? Thank you!

Hello, no. The Bronco body is much older than the Traxxas body ... but that's a good idea ! ;-))

hello
i just want to ask if i print this model then traxxas trx4 bronco 2021 headlight & taillight will fit in this body?
thanks

hello i was wondering on the 2021 bronco is the front bumper and front grill its own stl or file or is it one big part, reason for asking is i would like to build this but not sure how many parts there is, thank you for your time

Hello, if you look at the pictures, you'll find out that all the parts are separate. Different colour means different parts.
Cheers, Olli

I really like your work, especially the Jeep Willy's Station Wagon. I've been searching for a wagon body that I can print in 1:10 scale. I've always wanted a real one for a project, & finally after 30+ years got one - it's a '59 "Maverick Edition" according to the serial #. It's sitting in my garage while I work out some of the details of what I want to do. That's where your model would be so useful - I could do the mods (on the scale printout) to work out bugs/esthetic preferences. I've been trying to purchase your model (several times over last few weeks) but the cults3d site won't accept my visa payment info & I can't figure out why (i buy stuff online with no issues - often thru Amazon). If you have any ideas or ways to help I'd appreciate it. I REALLY want this model - i finally got my 3d printer dialed in for printing the thin walled RC bodies. Thanks (in advance) for you time. - not including personal info bcuz I think these msgs are unfortunately not private...

On the Ford Bronco 2021, the grille letters for the "C" and second "O" are messed up. Is there a way you can fix that and re-upload the part?

Bronco 2021 modelo IS compatible with trx4 sport!? Need supports for sport model?

Yes ! TRX4 Sport has the same chassis. 313mm wheelbase and same chassis plates and rockslider...

Hi I'm looking into printing the Jeep fc body I was wondering what software I need and printer I have nothing to do it with and looking to get into it I use Mac computers

I think I love you!!! Great subject material... Will be back when I find a chassis! Hot diggity dog!

Hello Perry,

the german word "Schweller" is what you call "rocker panel" !
You are right, there is no tailgate. For my M715 I used only a chain ...
The project is closed. If I can do something for you - I let you know.
Cheers, Olli

Olli: I purchased the RC BODY JEEP KAISER M715 SCALE CRAWLER 1/10 for a friend and we can't figure out where the sill or Schweller is used. Also, there is no tailgate for the Jeep. Any chance you can model one and add it to the model?
Thank you!
Perry

Hi I have a longer wheel base rc vehicle and would like to know the chances of you making the 4 door variant?

What motor file did you use for the Capra buggy and where do I find it

Can you send me a completed bronco that is put together, so I can just scale it down. I am having too much trouble with this trying to scale it down per part. Thanks

Hello AustinLambert,

this is what the description says:

The Bronco requires a 3d printer of at least 250mmx250mm or more cuts must be made on the model. !

If you only want to scale down the size, you can do this job in your slicer software that you youse with your 3d-printer. But be sure that you use the same factor for every part.
If you want to cut the parts into smaller pieces so that they will fit on your 3d printers bed, you have to use software that is able to do this job like "Microsoft 3D Builder", a free software that comes with every Windows10 PC.

Cheers, Olli