Aller au contenu

Attention les amis, il ne s'agit pas d'une messagerie privée mais bien d'un fil de discussion public. C'est un lieu d'échanges, merci de rester courtois et respectueux. Toutes sollicitations commerciales ou malveillantes sera supprimée. Si vous évoquez un design en particulier, n'hésitez pas à ajouter dans votre message le lien ou à donner le titre du modèle afin que la conversation puisse être correctement orientée. Si vous souhaitez joindre des photos au sein de votre message, n’hésitez pas à téléverser vos images sur un service d’hébergement d’images en ligne gratuit comme Imgbb et à copier / coller les liens de vos images dans votre commentaire. Bonne discussion !

Écrivez votre message :

387 commentaires

Hi, I'm a model car collector and do custom work on them, I also do 3d printing, some friends have spoken me about your designs and ask me to to sell printed parts. I will like to know if you authorize me to sell them. Thank you

Hi, For the RX7 BB01 BODYKIT FOR TAMIYA 1/24. Can it be resized to 1/64?

Hi,
I saw some 1/64 hotwheels builds with this bodykit, but I don't know about the fitment and printability. I never tested on this scale

Ok. Thanks!!!

j aimerais que vous la faite je set pas comment le faire un tres gros merci

It´s updated now.
Thanks!

side window apliqde la MUSTANG 6ÈME GÉNÉRATION j ai le coter gauche j aimerais bien avoir le couter droit aussi c est tu passible de l avoir

Hello,
I will update the file with the other side.
If you want, you can mirror this part on your slicer software. There is a button called MIRROR.
Thanks for report me.
Cheers

Have you considered adding the N/A Porsche 917 engine to your collection? It would be a great addition to the Type 2 bus offerings.

Hello, thank you for the suggestion. I will study it. Cheers

hello sir how do i go about selling some of your prints i have a small circle of friends that love your products and id like to share the hobby with them

  • 1 j’aime

Hey man just wondering on the rx7 bodykit what percantage would be needed to fit 1 10 scale. Cheers

Hi,
Use 240%.
Thanks

Hello,
Thanks for reporting me.
It´s updated now.

I had purchased the hood For the tamiya Supra model. When it’s printed it’s a tiny bit out of scale. Like when the hood is centered there’s a gap on every angle and the pegs don’t line up in the body. I didn’t know if you had any adjustments I could put in to correct the issue. I can send pics on request of the current printed hood on the body to show the gap

Hello,
The hood needs a good orientation to not have warping problems. The best orientation is to print horizontally with a small angle (2 or 3 degrees) in order to not print 100% flat with the build plate.
Other good point to take care are the supports. Try to use 80% support density to minimize warping problems
Im travelling these days and will back home on thursday. I can send pictures about the orientation.
Please send me pictures of your hood problems to blackbox.cults3d@hotmail.com.
Thanks

Hey man, do u mayb have the time to design a Ferrari wheel for me? Let me know.

Kind Regarts

Hi,
Unfortunately I don´t have time to work with commisioned projects.
Sorry.

Hey bro, i am just wondering if i am able to rescale your files to fit my 1/18 toyota supra as i am looking to buy your stl files and mod it. thanks bro.

Hello,
I didn't test on any 1/18 model.
You can rescale to 1/18 by using 133.32% on your slicer

Hi bro, thanks for your reply. will try it bro thanks.

Hello, do you still have that RX-7 front replacement kit?

Hello,
Yes.
Please send me an email asking about to blackbox.cults3d@hotmail.com

Hello,
Thank you for the suggestion. I will take note for future ideas!

Cheers!

about the RWB BODY KIT for Porsche 1988 TAMIYA 1-24th
the fenders does not fit properly even after sanding fenders of the original kit. it seems they are larger. I am using a resin printer. don't know what's wrong with it.

Hi,

The original rear fenders needs to be trimmed like the instructions.
Please send pictures of the car body to blackbox.cults3d@hotmail.com
I will try to help.

wow, Thanks blackbox for your subscription to my channel :-)

MOTABAS.

  • 1 j’aime

I Love your work. It's Very detailled!!

Cheers

Thanks, your appreciation is very important, I often observe your designs, I like them very much.
MOTABAS.

hi i was wondering what printer would be compatible to print the tofu 86 would a mono 4k be able to print this thanks in advance

Hello,
Yes, It will print!

Hey BlackBox, you have top quality looking designs! Just wondering if you would be doing any Rocket Bunny kits? I'm a noob to 3D modelling, I have the naked rear bar panel and the GT wing modelled and printed but looking for mainly the fender flares and front bar for a 180sx 1/64 as they're hard to model for me as I model in solid.

Hi!
I have plans to model parts for 180SX, But not for now because I don't have the modelkit to scan and test the fitment.

Cheers

Thanks for answering👍that's awesome news mate, looking forward to it!!

Your flat 4 engine and turbo kit are rocking my Tamiya Bug. Just curious...is this a Porshe engine or a extreemly hopped up VW 4?

Hi!
It´s a nextremely modified vw engine with custom fan cover and a lot of performance modifications.
Thank you for your feedback!
Follow us on instagram @BLACKBOXSTL

Cheers!

Can you seperate the carbs and the tunnel ram please...Thank you
RAM AIR TUNNEL SET FOR 572 ENGINE 1-24TH

I separate the parts now. You can download it again.
Cheers

  • 1 j’aime

can you modify your trueno kit for a levin

Hello, Unfortunately No.
I don´t have the Levin modelkit to 3d scan and test the fitment.
Sorry.

Hi there, i hope you are well. Just wondering if you are able to do an update on one of your wheel sets?, its the KC Steel wheel, what i'm looking for is for the
vented holes in the wheel to be filled in on all 3 offsets?, i'm in the UK and looking for this exact style without holes, they were used in the 1970's on old beaten
up cars for like a demolition derby, heres hoping!, happy to pay for the edit, i have bought the files previously, kind regards Gary

Hello,
Please send me the picture of a wheel to blackbox.cults3d@hotmail.com

hello I bought a few files from you I was wondering if I could sell some physical prints of the files that I made with my 3d printer ?

  • 1 j’aime

i bought the 400z body kit and the file I received is missing the front right fender

Hi,
Thank you for report me.

I Will update the file soon, but you can also mirror the fender in your slicer.

Thank you

  • 1 j’aime

It´s updated now.
THanks a lot.

bonjour pourriez vous me mettre le fichier a 1/18 svp pour qu ensuite je vous l achete merci par avance

Hello,
You can easily rescale on your slicer. Just put
133.32% to convert from 1/24 to 1/18 on the scale tab on your slicer.
Any doubts, send me an email to blackbox.cults3d@hotmail.com

AGF-BB1 STYLE WHEEL SET WITH TWO OFFSETS FOR DIECAST AND RC can you tell me what scale these are model in? Thanks...

Hello,
It's 1/24th scale.
You can resize a bit to your desired diameter on your 3d slicer.