Keep that New Years resolution of getting fit by staying safe with a neopixel motion activated running band powered by Flora, Adafruit's wearables electronics platform.
Using flexible material, this wristband uses motion-activated LEDs,
great for running safety, night clubs, or any time you feel the need to be blinky while moving.
Get the complete build guide on learn.adafruit.com
Print Temp 225
No raft or support needed.
NeoPixil ring and accelerometer lays on the back of the Flora.
Align the Flora inside the body. Use a micro pencil to mark the pin outs.
The pins of the NeoPixil are marked from the inside of the body.
Position the accelerometer in the center of the NeoPixel Ring.
Use a needle to puncture the markings and stretch out the holes.
Thread strips of 30 gauge wrapping wire through the holes.
Lengthy wires secures the Flora and the accelerometer in place while soldering.
Pull wires to the edge of the pad and bend the tip to secure the connection while soldering.
A complete circuit diagram and tutorial can be found on adafruits learning system.
JST connector will reroute the power for a compact circuit.
Solder from the on-board JST connector on the Gemma.
A slide switch will makes it easy power it on and off.
Shrink tubing secures and protects our solder connections.
The wires in the power circuit are positioned inside the body and fitted on top of the Flora.
Position NeoPixel over the wires of the accelerometer and thread the appropriate wires to the pins.
Bend down wires to secure the NeoPixil ring.
Cut the wires short, strip and solder the NeoPixel ring.
Remove any access wire from the NeoPixel ring.
Thread the Accelerometer and bend back the wires to hold the circuit in the center of the ring.
Strip, solder and remove the access wire from the accelerometer.
Reduce the length of the battery cable and heat shrink the connection.
Pop the slide switch through the cavity for a tight fit
Carefully position the battery on top of the circuit.
Align the back cover to the cut out of the slide switch
Press down on the edges of cover to protect the circuit.
USB easily plugs into to the flora to reprogram sketches.
The pins on the band snap in to securely hold the body together.
Side the switch to it on power and keep your New Years resolution while staying safe and glowy.
What activity will you light up this year? Let us know by joining our weekly show and tell:
Adafruit was founded in 2005 by MIT engineer, Limor "Ladyada" Fried. Her goal was to create the best place online for learning electronics and making the best designed products for makers of all ages and skill levels. Since then Adafruit has grown to over 25 employees in the heart of NYC. We've expanded our offerings to include tools, equipment and electronics that Limor personally selects, tests and approves before going in to the Adafruit store. We pride ourselves on having great prices, the best customer service, technical support and fast shipping. We hope we can assist you on your journey of learning - At Adafruit we celebrate engineering happiness!