Aller au contenu

Bandolier of Light

Description du modèle 3D

Brighten up your militaristic Halloween costume with an illuminated bandolier made from NinjaFlex 3D printing filament and a strip of glowing NeoPixels. These are (potentially sapphire) bullets of pure love. Full tutorial:
Edit and modify the design in Autodesk 123D Design:

Paramètres d'impression 3D

We recommend printing the STLs in NinjaFlex flexible filament. The design is optimized to print with no support material.
For the best quality when printing with NinjaFlex, we recommend the following slicing settings:
Retraction: Off
Speeds: 45/50
Extruder Temp: 230c
Infill 10%
Raft+Support: Off
No Heated Bed
The print may include some string artifacts during the printing process. These bits of string and easily to remove with a pair of sharp scissors. Tug on the bits of material and ship them away to remove the excess material.
The original solids where created in Autodesk 123D Design and are available to customize to match your costume. You can edit the model directly inside your browser or the 123D desktop app:


Adafruit was founded in 2005 by MIT engineer, Limor "Ladyada" Fried. Her goal was to create the best place online for learning electronics and making the best designed products for makers of all ages and skill levels. Since then Adafruit has grown to over 25 employees in the heart of NYC. We've expanded our offerings to include tools, equipment and electronics that Limor personally selects, tests and approves before going in to the Adafruit store. We pride ourselves on having great prices, the best customer service, technical support and fast shipping. We hope we can assist you on your journey of learning - At Adafruit we celebrate engineering happiness!




Créations similaires

Ajouter un commentaire