This is a fully functioning spring loaded cabinet latch appropriate for standard kitchen cabinet size doors and smaller. I used it on a BBQ cabinet along with the Steam Punk Hinge also on this site. For a finish I mixed acetone with copper powder and painted it on with a small brush. Once dry high gloss polishing with a brass dremel brush or softer tools is possible.
Printed IN ABS at .3 mm resolution. Finish coated with acetone mixed with copper powder and then polished with dremel tools. Uses #6 screws to fasten or if scaled to 80% it will use #6 screws. Anticipate it will change color and go green with humidity which is the desired effect