Aller au contenu

Boîtier FLSUN SR

?
Qualité de la création : 4,4/5 (8 votes)
Évaluation des membres sur l’imprimabilité, l’utilité, les détails, etc.

Description du modèle 3D

Caisson pour FLSUN SR a fermeture magnétique avec ventilation active.

merci de bien lire les notices avant de vous lancer dans l'impression pour ne pas vous tromper de fichier.

Ce caisson peut être installé que vous possédiez l'écran TFT70 ou non.

montage fixé sur châssis.

instruction de montage fourni en PDF.

beaucoup de versions incluse dans les fichiers

  • version imprimable sur des plateaux de 30cm

  • version que j'ai coupé pour ceux qui voudrai l'imprimer sur la SR.

chaque version propose des pièces avec ou sans fixation extrudeur, avec ou sans poignée avec ou sans passage des fils de l'écran.

liste du matériel à acheter dans le PDF (environ 40€ + filament)

récapitulatif :

12 vis M4x16 (+ 2 optionnelles pour la poignée)

12 écrous en T M4

2 aimants diamètre 8mm par 10mm max

1 tige filetée ou tige aluminium de 8mm

1 tige filetée acier de 6mm

3 feuilles de plexiglas de 1mm

caisson compatible avec écran BTT70

ATTENTION, la version cut, ayant un renfort central proéminant sur la porte, cela peu gêner l'application d'un changement de filament au dela de 297mm de hauteur de print.

c'est pourquoi je vous encourage vraiment a imprimer la version full

mise à jour V2 :(impactant les fichiers porte haut et porte bas)

  • ajout du fichier pour ceux qui ne possèdent pas l'écran

  • suppression de l'inscription JLB Création interne sur "porte bas

  • Correction de la tolérance de filetage sur "porte bas".

  • ajout de liens vers les produits

  • arborescence fichier plus simple

  • ajout fichier poignée

  • ajout instruction en Anglais

mise à jour de la V3 :

  • ajout d'un fichier montant fixe guide (permettant d'attacher le câble d'alim)

  • ajout d'un fichier montant fixe guide spécial (permettant d'attacher le câble d'alim)

  • ajout d'un support de fixation pour l'écran d'origine

  • ajout du fichier porte bas sans logo

  • mise a jour de la notice version FR et EN.

mise à jour de la V4 :

  • ajout des fichiers pour ventilation active

  • ajout de fichiers adaptés aux différents modèle de profilés alu de la SR (voir photo V1 et V2)

  • ajout de fichiers facilitant l'impression

mise à jour V7 :

ajout d'un thermostat pour réguler la température du caisson.

fichier lien du matériel dans le PDF.


Paramètres d’impression 3D

les fichiers ont été dessinés pour éviter les supports. placer la face plane sur le plateau.

les tolérances d'emboitement sont de 0.2mm, si votre imprimante est bien réglée aucun soucis de montage.

parametres utilisés sur la X1 qui a imprimé :

remplissage 25

vitesse 100mm/s

PLA utilisé : SOVB noir alumine 210°c

Consommation de plastique version fullsize : 1600gr

Informations sur le fichier 3D

  • Format du design 3D : ZIP Détails du dossier Fermer
    • caisson FLSUN SR V7.zip
      • active fan Option/Active fan option EN.pdf
      • active fan Option/Active fan option FR.pdf
      • active fan Option/Cut version (printable on SR)/bride.stl
      • active fan Option/Cut version (printable on SR)/couvercle.stl
      • active fan Option/Cut version (printable on SR)/tuyere.stl
      • active fan Option/Cut version (printable on SR)/lement fixe supperieur ventilation avec extudeur part 1.stl
      • active fan Option/Cut version (printable on SR)/lement fixe supperieur ventilation avec extudeur part 2.stl
      • active fan Option/full version (more interesting)/bride.stl
      • active fan Option/full version (more interesting)/couvercle.stl
      • active fan Option/full version (more interesting)/tuyere.stl
      • active fan Option/full version (more interesting)/lement fixe superieur ventilation avec extrudeur.stl
      • active fan Option/full version (more interesting)/lement fixe superieur ventilation sans extrudeur.stl
      • active fan Option/thermostat file/boitier.stl
      • active fan Option/thermostat file/bride sonde.stl
      • active fan Option/thermostat file/couvercle.stl
      • active fan Option/thermostat file/support regulateur.stl
      • Cut version (printable on SR)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Partie fixe/partie basse fixe cut part 1 X2.stl
      • Cut version (printable on SR)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Partie fixe/partie basse fixe cut part 2 X2.stl
      • Cut version (printable on SR)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Partie fixe/partie haute fixe cut part 1 X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Partie fixe/partie haute fixe cut part 2 X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Partie fixe/partie haute fixe extrudeur cut part 1 X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Partie fixe/partie haute fixe extrudeur cut part 2 special X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Partie fixe/V1/montant fixe guide cable special V1 X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Partie fixe/V1/montant fixe guide cable V1 X3.stl
      • Cut version (printable on SR)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Partie fixe/V1/montant fixe V1 X12.stl
      • Cut version (printable on SR)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Partie fixe/V2/montant fixe guide cable special X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Partie fixe/V2/montant fixe guide cable X3.stl
      • Cut version (printable on SR)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Partie fixe/V2/montant fixe X12.stl
      • Cut version (printable on SR)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Porte/poigne X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Porte/porte bas cut 1 X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Porte/porte bas cut 1sans logo X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Porte/porte bas cut 2 X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Porte/Porte cale X2.stl
      • Cut version (printable on SR)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Porte/Porte centre bas cut 2 X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Porte/Porte centre bas poigne X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Porte/Porte centre haut cut 2 X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Porte/Porte centre haut poigne X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Porte/Porte charniere X2.stl
      • Cut version (printable on SR)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Porte/porte haut cut 1 X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Porte/porte haut cut 2 X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Porte/Porte montant Droit X4.stl
      • Cut version (printable on SR)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Porte/Porte montant gauche X4.stl
      • Cut version (printable on SR)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Partie fixe/partie basse fixe cut part 1 X2.stl
      • Cut version (printable on SR)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Partie fixe/partie basse fixe cut part 2 X2.stl
      • Cut version (printable on SR)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Partie fixe/partie haute fixe cut part 1 X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Partie fixe/partie haute fixe cut part 2 X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Partie fixe/partie haute fixe extrudeur cut part 1 X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Partie fixe/partie haute fixe extrudeur cut part 2 special X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Partie fixe/V1/montant fixe guide cable special V1 X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Partie fixe/V1/montant fixe guide cable V1 X3.stl
      • Cut version (printable on SR)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Partie fixe/V1/montant fixe V1 X12.stl
      • Cut version (printable on SR)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Partie fixe/V2/montant fixe guide cable special X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Partie fixe/V2/montant fixe guide cable X3.stl
      • Cut version (printable on SR)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Partie fixe/V2/montant fixe special X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Porte/porte bas cut 1 X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Porte/porte bas cut 1sans logo X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Porte/porte bas cut 2 X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Porte/Porte cale X2.stl
      • Cut version (printable on SR)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Porte/Porte centre bas cut 1 X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Porte/Porte centre bas cut 2 X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Porte/Porte centre haut cut 1 X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Porte/Porte centre haut cut 2 X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Porte/Porte charniere X2.stl
      • Cut version (printable on SR)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Porte/porte haut cut 1 X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Porte/porte haut cut 2 X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Porte/Porte montant Droit X4.stl
      • Cut version (printable on SR)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Porte/Porte montant gauche X4.stl
      • Cut version (printable on SR)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Partie fixe/partie basse fixe cut part 1 X2.stl
      • Cut version (printable on SR)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Partie fixe/partie basse fixe cut part 2 X2.stl
      • Cut version (printable on SR)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Partie fixe/partie haute fixe cut part 1 X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Partie fixe/partie haute fixe cut part 2 X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Partie fixe/partie haute fixe without extrudeur cut part 1 X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Partie fixe/partie haute fixe without extrudeur cut part 2 special X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Partie fixe/V1/montant fixe guide cable special V1 X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Partie fixe/V1/montant fixe guide cable V1 X3.stl
      • Cut version (printable on SR)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Partie fixe/V1/montant fixe V1 X12.stl
      • Cut version (printable on SR)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Partie fixe/V2/montant fixe guide cable special X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Partie fixe/V2/montant fixe guide cable X3.stl
      • Cut version (printable on SR)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Partie fixe/V2/montant fixe X12.stl
      • Cut version (printable on SR)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Porte/poigne X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Porte/porte bas cut 1 X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Porte/porte bas cut 1sans logo X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Porte/porte bas cut 2 X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Porte/Porte cale X2.stl
      • Cut version (printable on SR)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Porte/Porte centre bas cut 2 X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Porte/Porte centre bas poigne X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Porte/Porte centre haut cut 2 X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Porte/Porte centre haut poigne X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Porte/Porte charniere X2.stl
      • Cut version (printable on SR)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Porte/porte haut cut 1 X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Porte/porte haut cut 2 X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Porte/Porte montant Droit X4.stl
      • Cut version (printable on SR)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Porte/Porte montant gauche X4.stl
      • Cut version (printable on SR)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Partie fixe/partie basse fixe cut part 1 X2.stl
      • Cut version (printable on SR)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Partie fixe/partie basse fixe cut part 2 X2.stl
      • Cut version (printable on SR)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Partie fixe/partie haute fixe cut part 1 X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Partie fixe/partie haute fixe cut part 2 X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Partie fixe/partie haute fixe without extrudeur cut part 1 X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Partie fixe/partie haute fixe without extrudeur cut part 2 special X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Partie fixe/V1/montant fixe guide cable special V1 X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Partie fixe/V1/montant fixe guide cable V1 X3.stl
      • Cut version (printable on SR)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Partie fixe/V1/montant fixe V1 X12.stl
      • Cut version (printable on SR)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Partie fixe/V2/montant fixe guide cable special X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Partie fixe/V2/montant fixe guide cable X3.stl
      • Cut version (printable on SR)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Partie fixe/V2/montant fixe X12.stl
      • Cut version (printable on SR)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Porte/porte bas cut 1 X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Porte/porte bas cut 1sans logo X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Porte/porte bas cut 2 X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Porte/Porte cale X2.stl
      • Cut version (printable on SR)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Porte/Porte centre bas cut 1 X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Porte/Porte centre bas cut 2 X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Porte/Porte centre haut cut 1 X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Porte/Porte centre haut cut 2 X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Porte/Porte charniere X2.stl
      • Cut version (printable on SR)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Porte/porte haut cut 1 X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Porte/porte haut cut 2 X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Porte/Porte montant Droit X4.stl
      • Cut version (printable on SR)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Porte/Porte montant gauche X4.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Partie fixe/partie basse fixe cut part 1 X2.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Partie fixe/partie basse fixe cut part 2 X2.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Partie fixe/partie haute fixe cut part 1 X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Partie fixe/partie haute fixe cut part 2 X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Partie fixe/partie haute fixe extrudeur cut part 1 X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Partie fixe/partie haute fixe extrudeur cut part 2 special X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Partie fixe/V1/montant fixe ecran V1 X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Partie fixe/V1/montant fixe guide cable special V1 X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Partie fixe/V1/montant fixe guide cable V1 X3.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Partie fixe/V1/montant fixe V1 X11.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Partie fixe/V1/support pour ecran origine V1 X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Partie fixe/V2/montant fixe ecran X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Partie fixe/V2/montant fixe guide cable special X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Partie fixe/V2/montant fixe guide cable X3.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Partie fixe/V2/montant fixe X11.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Partie fixe/V2/support ecran X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Porte/poigne X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Porte/porte bas cut 1 X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Porte/porte bas cut 1sans logo X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Porte/porte bas cut 2 X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Porte/Porte cale X2.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Porte/Porte centre bas cut 2 X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Porte/Porte centre bas poigne X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Porte/Porte centre haut cut 2 X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Porte/Porte centre haut poigne X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Porte/Porte charniere X2.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Porte/porte haut cut 1 X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Porte/porte haut cut wo TFT X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Porte/Porte montant Droit X4.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Porte/Porte montant gauche X4.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Partie fixe/partie basse fixe cut part 1 X2.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Partie fixe/partie basse fixe cut part 2 X2.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Partie fixe/partie haute fixe cut part 1 X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Partie fixe/partie haute fixe cut part 2 X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Partie fixe/partie haute fixe extrudeur cut part 1 X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Partie fixe/partie haute fixe extrudeur cut part 2 special X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Partie fixe/V1/montant fixe ecran V1 X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Partie fixe/V1/montant fixe guide cable special V1 X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Partie fixe/V1/montant fixe guide cable V1 X3.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Partie fixe/V1/montant fixe V1 X11.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Partie fixe/V1/support pour ecran origine V1 X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Partie fixe/V2/montant fixe ecran X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Partie fixe/V2/montant fixe guide cable special X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Partie fixe/V2/montant fixe guide cable X3.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Partie fixe/V2/montant fixe X11.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Partie fixe/V2/support ecran X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Porte/porte bas cut 1 X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Porte/porte bas cut 1sans logo X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Porte/porte bas cut 2 X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Porte/Porte cale X2.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Porte/Porte centre bas cut 1 X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Porte/Porte centre bas cut 2 X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Porte/Porte centre haut cut 1 X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Porte/Porte centre haut cut 2 X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Porte/Porte charniere X2.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Porte/porte haut cut 1 X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Porte/porte haut cut wo TFT X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Porte/Porte montant Droit X4.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Porte/Porte montant gauche X4.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Partie fixe/partie basse fixe cut part 1 X2.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Partie fixe/partie basse fixe cut part 2 X2.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Partie fixe/partie haute fixe cut part 1 X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Partie fixe/partie haute fixe cut part 2 X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Partie fixe/partie haute fixe without extrudeur cut part 1 X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Partie fixe/partie haute fixe without extrudeur cut part 2 special X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Partie fixe/V1/montant fixe ecran V1 X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Partie fixe/V1/montant fixe guide cable special V1 X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Partie fixe/V1/montant fixe guide cable V1 X3.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Partie fixe/V1/montant fixe V1 X11.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Partie fixe/V1/support pour ecran origine V1 X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Partie fixe/V2/montant fixe ecran X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Partie fixe/V2/montant fixe guide cable special X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Partie fixe/V2/montant fixe guide cable X3.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Partie fixe/V2/montant fixe X11.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Partie fixe/V2/support ecran X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Porte/poigne X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Porte/porte bas cut 1 X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Porte/porte bas cut 1sans logo X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Porte/porte bas cut 2 X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Porte/Porte cale X2.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Porte/Porte centre bas cut 2 X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Porte/Porte centre bas poigne X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Porte/Porte centre haut cut 2 X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Porte/Porte centre haut poigne X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Porte/Porte charniere X2.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Porte/porte haut cut 1 X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Porte/porte haut cut wo TFT X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Porte/Porte montant Droit X4.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Porte/Porte montant gauche X4.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Partie fixe/partie basse fixe cut part 1 X2.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Partie fixe/partie basse fixe cut part 2 X2.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Partie fixe/partie haute fixe cut part 1 X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Partie fixe/partie haute fixe cut part 2 X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Partie fixe/partie haute fixe without extrudeur cut part 1 X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Partie fixe/partie haute fixe without extrudeur cut part 2 special X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Partie fixe/V1/montant fixe ecran V1 X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Partie fixe/V1/montant fixe guide cable special V1 X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Partie fixe/V1/montant fixe guide cable V1 X3.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Partie fixe/V1/montant fixe V1 X11.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Partie fixe/V1/support pour ecran origine V1 X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Partie fixe/V2/montant fixe ecran X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Partie fixe/V2/montant fixe guide cable special X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Partie fixe/V2/montant fixe guide cable X3.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Partie fixe/V2/montant fixe X11.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Partie fixe/V2/support ecran X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Porte/porte bas cut 1 X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Porte/porte bas cut 1sans logo X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Porte/porte bas cut 2 X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Porte/Porte cale X2.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Porte/Porte centre bas cut 1 X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Porte/Porte centre bas cut 2 X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Porte/Porte centre haut cut 1 X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Porte/Porte centre haut cut 2 X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Porte/Porte charniere X2.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Porte/porte haut cut 1 X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Porte/porte haut cut wo TFT X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Porte/Porte montant Droit X4.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Porte/Porte montant gauche X4.stl
      • difficults d'impression (fail print)/Difficulty printing pillar.pdf
      • difficults d'impression (fail print)/difficult a imprimer les montants.pdf
      • difficults d'impression (fail print)/partie fixe/V1/demi bas montant fixe guide cable special V1.stl
      • difficults d'impression (fail print)/partie fixe/V1/demi bas montant fixe guide cable V1.stl
      • difficults d'impression (fail print)/partie fixe/V1/demi haut montant fixe guide cable special V1.stl
      • difficults d'impression (fail print)/partie fixe/V1/demi haut montant fixe guide cable V1.stl
      • difficults d'impression (fail print)/partie fixe/V1/demi montant fixe ecran V1.stl
      • difficults d'impression (fail print)/partie fixe/V1/demi montant fixe V1.stl
      • difficults d'impression (fail print)/partie fixe/V2/avec jeu augment (more loose)/montant fixe avec jeu.stl
      • difficults d'impression (fail print)/partie fixe/V2/avec jeu augment (more loose)/montant fixe guide cable avec jeu.stl
      • difficults d'impression (fail print)/partie fixe/V2/avec jeu augment (more loose)/montant fixe guide cable special avec jeu.stl
      • difficults d'impression (fail print)/partie fixe/V2/demi bas montant fixe guide cable special V2.stl
      • difficults d'impression (fail print)/partie fixe/V2/demi bas montant fixe guide cable V2.stl
      • difficults d'impression (fail print)/partie fixe/V2/demi haut montant fixe guide cable special V2.stl
      • difficults d'impression (fail print)/partie fixe/V2/demi haut montant fixe guide cable V2.stl
      • difficults d'impression (fail print)/partie fixe/V2/demi montant fixe ecran V2.stl
      • difficults d'impression (fail print)/partie fixe/V2/demi montant fixe V2.stl
      • difficults d'impression (fail print)/porte/demi montant droit X8.stl
      • difficults d'impression (fail print)/porte/demi montant gauche X8.stl
      • full version (more interesting)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Partie fixe/partie basse fixe X2.stl
      • full version (more interesting)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Partie fixe/partie haute fixe extrudeur special X1.stl
      • full version (more interesting)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Partie fixe/partie haute fixe X1.stl
      • full version (more interesting)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Partie fixe/V1/montant fixe guide cable special V1 X1.stl
      • full version (more interesting)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Partie fixe/V1/montant fixe guide cable V1 X3.stl
      • full version (more interesting)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Partie fixe/V1/montant fixe V1 X12.stl
      • full version (more interesting)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Partie fixe/V2/montant fixe guide cable special X1.stl
      • full version (more interesting)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Partie fixe/V2/montant fixe guide cable X3.stl
      • full version (more interesting)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Partie fixe/V2/montant fixe X12.stl
      • full version (more interesting)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Porte/centre bas poigne X1.stl
      • full version (more interesting)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Porte/centre haut poigne X1.stl
      • full version (more interesting)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Porte/poigne X1.stl
      • full version (more interesting)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Porte/porte bas logo X1.stl
      • full version (more interesting)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Porte/porte bas sans logo X1.stl
      • full version (more interesting)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Porte/Porte cale X2.stl
      • full version (more interesting)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Porte/Porte charniere X2.stl
      • full version (more interesting)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Porte/porte haut w TFT70 X1.stl
      • full version (more interesting)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Porte/Porte montant Droit X4.stl
      • full version (more interesting)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Porte/Porte montant gauche X4.stl
      • full version (more interesting)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Partie fixe/partie basse fixe X2.stl
      • full version (more interesting)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Partie fixe/partie haute fixe extrudeur special X1.stl
      • full version (more interesting)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Partie fixe/partie haute fixe X1.stl
      • full version (more interesting)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Partie fixe/V1/montant fixe guide cable special V1 X1.stl
      • full version (more interesting)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Partie fixe/V1/montant fixe guide cable V1 X3.stl
      • full version (more interesting)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Partie fixe/V1/montant fixe V1 X12.stl
      • full version (more interesting)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Partie fixe/V2/montant fixe guide cable special X1.stl
      • full version (more interesting)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Partie fixe/V2/montant fixe guide cable X3.stl
      • full version (more interesting)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Partie fixe/V2/montant fixe X12.stl
      • full version (more interesting)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Porte/centre bas X1.stl
      • full version (more interesting)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Porte/centre haut X1.stl
      • full version (more interesting)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Porte/porte bas logo X1.stl
      • full version (more interesting)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Porte/porte bas sans logo X1.stl
      • full version (more interesting)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Porte/Porte cale X2.stl
      • full version (more interesting)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Porte/Porte charniere X2.stl
      • full version (more interesting)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Porte/porte haut w TFT70 X1.stl
      • full version (more interesting)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Porte/Porte montant Droit X4.stl
      • full version (more interesting)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Porte/Porte montant gauche X4.stl
      • full version (more interesting)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Partie fixe/partie basse fixe X2.stl
      • full version (more interesting)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Partie fixe/partie haute fixe ss extrudeur special X1.stl
      • full version (more interesting)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Partie fixe/partie haute fixe X1.stl
      • full version (more interesting)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Partie fixe/V1/montant fixe guide cable special V1 X1.stl
      • full version (more interesting)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Partie fixe/V1/montant fixe guide cable V1 X3.stl
      • full version (more interesting)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Partie fixe/V1/montant fixe V1 X12.stl
      • full version (more interesting)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Partie fixe/V2/montant fixe guide cable special X1.stl
      • full version (more interesting)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Partie fixe/V2/montant fixe guide cable X3.stl
      • full version (more interesting)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Partie fixe/V2/montant fixe X12.stl
      • full version (more interesting)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Porte/centre bas poigne X1.stl
      • full version (more interesting)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Porte/centre haut poigne X1.stl
      • full version (more interesting)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Porte/poigne X1.stl
      • full version (more interesting)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Porte/porte bas logo X1.stl
      • full version (more interesting)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Porte/porte bas sans logo X1.stl
      • full version (more interesting)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Porte/Porte cale X2.stl
      • full version (more interesting)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Porte/Porte charniere X2.stl
      • full version (more interesting)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Porte/porte haut w TFT70 X1.stl
      • full version (more interesting)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Porte/Porte montant Droit X4.stl
      • full version (more interesting)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Porte/Porte montant gauche X4.stl
      • full version (more interesting)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Partie fixe/partie basse fixe X2.stl
      • full version (more interesting)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Partie fixe/partie haute fixe ss extrudeur special X1.stl
      • full version (more interesting)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Partie fixe/partie haute fixe X1.stl
      • full version (more interesting)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Partie fixe/V1/montant fixe guide cable special V1 X1.stl
      • full version (more interesting)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Partie fixe/V1/montant fixe guide cable V1 X3.stl
      • full version (more interesting)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Partie fixe/V1/montant fixe V1 X12.stl
      • full version (more interesting)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Partie fixe/V2/montant fixe guide cable special X1.stl
      • full version (more interesting)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Partie fixe/V2/montant fixe guide cable X3.stl
      • full version (more interesting)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Partie fixe/V2/montant fixe X12.stl
      • full version (more interesting)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Porte/centre bas X1.stl
      • full version (more interesting)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Porte/centre haut X1.stl
      • full version (more interesting)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Porte/porte bas logo X1.stl
      • full version (more interesting)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Porte/porte bas sans logo X1.stl
      • full version (more interesting)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Porte/Porte cale X2.stl
      • full version (more interesting)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Porte/Porte charniere X2.stl
      • full version (more interesting)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Porte/porte haut w TFT70 X1.stl
      • full version (more interesting)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Porte/Porte montant Droit X4.stl
      • full version (more interesting)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Porte/Porte montant gauche X4.stl
      • full version (more interesting)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Partie fixe/partie basse fixe X2.stl
      • full version (more interesting)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Partie fixe/partie haute fixe extrudeur special X1.stl
      • full version (more interesting)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Partie fixe/partie haute fixe X1.stl
      • full version (more interesting)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Partie fixe/V1/montant fixe ecran V1 X1.stl
      • full version (more interesting)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Partie fixe/V1/montant fixe guide cable special V1 X1.stl
      • full version (more interesting)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Partie fixe/V1/montant fixe guide cable V1 X3.stl
      • full version (more interesting)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Partie fixe/V1/montant fixe V1 X11.stl
      • full version (more interesting)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Partie fixe/V1/support pour ecran origine V1 X1.stl
      • full version (more interesting)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Partie fixe/V2/montant fixe ecran X1.stl
      • full version (more interesting)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Partie fixe/V2/montant fixe guide cable special X1.stl
      • full version (more interesting)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Partie fixe/V2/montant fixe guide cable X3.stl
      • full version (more interesting)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Partie fixe/V2/montant fixe X11.stl
      • full version (more interesting)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Partie fixe/V2/support ecran X1.stl
      • full version (more interesting)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Porte/centre bas poigne X1.stl
      • full version (more interesting)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Porte/centre haut poigne X1.stl
      • full version (more interesting)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Porte/poigne X1.stl
      • full version (more interesting)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Porte/porte bas logo X1.stl
      • full version (more interesting)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Porte/porte bas sans logo X1.stl
      • full version (more interesting)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Porte/Porte cale X2.stl
      • full version (more interesting)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Porte/Porte charniere X2.stl
      • full version (more interesting)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Porte/porte haut without TFT70 X1.stl
      • full version (more interesting)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Porte/Porte montant Droit X4.stl
      • full version (more interesting)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Porte/Porte montant gauche X4.stl
      • full version (more interesting)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Partie fixe/partie basse fixe X2.stl
      • full version (more interesting)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Partie fixe/partie haute fixe extrudeur special X1.stl
      • full version (more interesting)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Partie fixe/partie haute fixe X1.stl
      • full version (more interesting)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Partie fixe/V1/montant fixe ecran V1 X1.stl
      • full version (more interesting)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Partie fixe/V1/montant fixe guide cable special V1 X1.stl
      • full version (more interesting)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Partie fixe/V1/montant fixe guide cable V1 X3.stl
      • full version (more interesting)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Partie fixe/V1/montant fixe V1 X11.stl
      • full version (more interesting)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Partie fixe/V1/support pour ecran origine V1 X1.stl
      • full version (more interesting)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Partie fixe/V2/montant fixe ecran X1.stl
      • full version (more interesting)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Partie fixe/V2/montant fixe guide cable special X1.stl
      • full version (more interesting)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Partie fixe/V2/montant fixe guide cable X3.stl
      • full version (more interesting)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Partie fixe/V2/montant fixe X11.stl
      • full version (more interesting)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Partie fixe/V2/support ecran X1.stl
      • full version (more interesting)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Porte/centre bas X1.stl
      • full version (more interesting)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Porte/centre haut X1.stl
      • full version (more interesting)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Porte/porte bas logo X1.stl
      • full version (more interesting)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Porte/porte bas sans logo X1.stl
      • full version (more interesting)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Porte/Porte cale X2.stl
      • full version (more interesting)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Porte/Porte charniere X2.stl
      • full version (more interesting)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Porte/porte haut without TFT70 X1.stl
      • full version (more interesting)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Porte/Porte montant Droit X4.stl
      • full version (more interesting)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Porte/Porte montant gauche X4.stl
      • full version (more interesting)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Partie fixe/partie basse fixe X2.stl
      • full version (more interesting)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Partie fixe/partie haute fixe ss extrudeur special X1.stl
      • full version (more interesting)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Partie fixe/partie haute fixe X1.stl
      • full version (more interesting)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Partie fixe/V1/montant fixe ecran V1 X1.stl
      • full version (more interesting)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Partie fixe/V1/montant fixe guide cable special V1 X1.stl
      • full version (more interesting)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Partie fixe/V1/montant fixe guide cable V1 X3.stl
      • full version (more interesting)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Partie fixe/V1/montant fixe V1 X11.stl
      • full version (more interesting)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Partie fixe/V1/support pour ecran origine V1 X1.stl
      • full version (more interesting)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Partie fixe/V2/montant fixe ecran X1.stl
      • full version (more interesting)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Partie fixe/V2/montant fixe guide cable special X1.stl
      • full version (more interesting)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Partie fixe/V2/montant fixe guide cable X3.stl
      • full version (more interesting)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Partie fixe/V2/montant fixe X11.stl
      • full version (more interesting)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Partie fixe/V2/support ecran X1.stl
      • full version (more interesting)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Porte/centre bas poigne X1.stl
      • full version (more interesting)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Porte/centre haut poigne X1.stl
      • full version (more interesting)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Porte/poigne X1.stl
      • full version (more interesting)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Porte/porte bas logo X1.stl
      • full version (more interesting)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Porte/porte bas sans logo X1.stl
      • full version (more interesting)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Porte/Porte cale X2.stl
      • full version (more interesting)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Porte/Porte charniere X2.stl
      • full version (more interesting)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Porte/porte haut w TFT70 X1.stl
      • full version (more interesting)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Porte/Porte montant Droit X4.stl
      • full version (more interesting)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Porte/Porte montant gauche X4.stl
      • full version (more interesting)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Partie fixe/partie basse fixe X2.stl
      • full version (more interesting)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Partie fixe/partie haute fixe ss extrudeur special X1.stl
      • full version (more interesting)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Partie fixe/partie haute fixe X1.stl
      • full version (more interesting)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Partie fixe/V1/montant fixe ecran V1 X1.stl
      • full version (more interesting)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Partie fixe/V1/montant fixe guide cable special V1 X1.stl
      • full version (more interesting)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Partie fixe/V1/montant fixe guide cable V1 X3.stl
      • full version (more interesting)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Partie fixe/V1/montant fixe V1 X11.stl
      • full version (more interesting)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Partie fixe/V1/support pour ecran origine V1 X1.stl
      • full version (more interesting)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Partie fixe/V2/montant fixe ecran X1.stl
      • full version (more interesting)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Partie fixe/V2/montant fixe guide cable special X1.stl
      • full version (more interesting)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Partie fixe/V2/montant fixe guide cable X3.stl
      • full version (more interesting)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Partie fixe/V2/montant fixe X11.stl
      • full version (more interesting)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Partie fixe/V2/support ecran X1.stl
      • full version (more interesting)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Porte/centre bas X1.stl
      • full version (more interesting)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Porte/centre haut X1.stl
      • full version (more interesting)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Porte/porte bas logo X1.stl
      • full version (more interesting)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Porte/porte bas sans logo X1.stl
      • full version (more interesting)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Porte/Porte cale X2.stl
      • full version (more interesting)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Porte/Porte charniere X2.stl
      • full version (more interesting)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Porte/porte haut w TFT70 X1.stl
      • full version (more interesting)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Porte/Porte montant Droit X4.stl
      • full version (more interesting)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Porte/Porte montant gauche X4.stl
      • general instruction EN.pdf
      • instruction EN.pdf
      • instruction gnrales FR.pdf
      • instructions FR.pdf

    En savoir plus sur les formats

  • Dernière mise à jour : 2022-04-01 à 17h10
  • Date de publication : 2022-02-07 à 18h55

Copyright

©

Mots-clefs

Créateur

Page traduite par traduction automatique. Voir la version originale.
Vous rencontrez un souci avec ce design ? Signaler un problème

Meilleurs fichiers pour imprimante 3D de la catégorie Outils

Meilleures ventes de la catégorie Outils


Ajouter un commentaire


Vous souhaitez soutenir Cults ?

Vous aimez Cults et vous avez envie de nous aider à continuer l’aventure en toute indépendance ? Sachez que nous sommes une petite équipe de 3 personnes et qu’il est donc très simple de nous soutenir pour maintenir l’activité et créer les futurs développements. Voici 4 solutions accessibles à tous :

  • PUBLICITÉ : Désactivez votre bloqueur de publicité AdBlock et cliquez sur nos bannières publicitaires.

  • AFFILIATION : Réalisez vos achats en ligne en cliquant sur nos liens affiliés ici Amazon.

  • DON : Si vous voulez, vous avez la possibilité de nous faire un don via PayPal.

  • BOUCHE À OREILLE : Invitez vos amis à venir découvrir le site et les magnifiques fichiers 3D partagés par la communauté !