Aller au contenu

10/22 Stock de vecteurs

?
Qualité de la création : 5,0/5 (2 votes)
Évaluation des membres sur l’imprimabilité, l'utilité, les détails, etc.
  • 12,8k vues
  • 49 j'aimes
  • 101 téléchargements

Description du modèle 3D

Ce modèle donne à une usine 10/22 l'apparence d'un stock de Kriss Vector, avec une poignée de chargement à gauche, et 2 zones de stockage de mags sur le fond

Paramètres d'impression 3D

Elle a été imprimée à une hauteur de couche de 0,12 mm, à l'aide d'une buse de 0,4 mm, avec une épaisseur de paroi standard de 2,4 mm

  • Format du fichier 3D : ZIP
  • Date de publication : 2020/08/31 à 6h35

Mots-clefs

Créateur

Designs 1
Téléchargés 101
Abonnés 20

Copyright

©

Page traduite par traduction automatique. Voir la version originale.


Makes réalisés par la communauté

Meilleures ventes de la catégorie Outil


Ajouter un commentaire

30 commentaires

No, this is a stock for a real firearm, it changes the guns appearance.

Mwnickerson, if you have purchased this model, pm me on insta and I will send you the original fusion files to work with

Might be stupid, does this actually shoot 3D printed bullets?

Hi I am looking to make cosmetic changes, would it be possible to get the .step files?

I personally used the standard 10 shot 10/22 magazines

Im in the process of buying this to complete this build.
What mag did you procure for this build ? Trying to locate everything i need first.
Thanks

Stock 10/22, or bull barrel works fine, Most people cut the barrel down as it sticks out a wee bit, I honestly couldn't recall if the rear sights interfere, I never had any on the rifle that I used to fit it to.

any issues using with the stock 10/22 barrel? also is the shroud long enough to cover the stock barrel with stock front sight?

I'll give that a go and see what happens. Thanks

Sounds like your filament is moist, chuck it in the oven at 40 degrees C for 3 hours, even new filament can be like that.

Otherwise I just print with a brim.

Sounds like your filament is moist, chuck it in the oven at 40 degrees C for 3 hours, even new filament can be like that.

Otherwise I just print with a brim.

What were your printer parameters. Did you use a raft or brim, I'm having a heck oh a time printing it on my Et4+. I've used both prusa slicer and cura and both have produced numerous rats nests. So the more fine tuned and dialed in I can get the better. My bed is leveled and I've ised both painters tape and glue sticks but for some reason I can't get a print to stick to the bed. I've printed other items on the printer with no issues. Any guidance would be appreciated.

On a cr10? Both, laying down, pointing corner to corner, or upright
:D

One more question. Is that lengthwise or standing? Haha sorry for the questions but also thank you for the answers.

Thats fine, if you have a cr10 sized printer there is also the 1 piece one that will fit.

Was looking to do it in one piece.

1 and 2, there are 2 versions, one to fit on an ender 3 in 2 pieces

The top stock with handle attached is one piece?

all the parts can be printed on the ender 3, if that answers your question

What’s the largest piece measure out to? Trying to figure if I have a big enough printer.

With supports, definitely with supports

When printing this did you print with or without supports?

I don't have one yet. I don't want to purchase the wrong one is all.

The stock was designed around the standard reciever, the one that has a removable rail, and is NOT takedown. Which model do you have?

Can any 10/22 be used as long as it is not a takedown? Or is this modeled for a specific model rifle?

Standard receiver only sadly

I'm looking to buy a 10/22 for this specifically so I wanna know does it matter if I get the takedown or standard or are they the same?

Great thanks for getting back!

Though the 3d model shows a Ruger receiver in the exploded view, however, it is ONLY the shell and adaptor parts. There is no firearm part to this, just the shell :D So for what you are doing it is perfect

This looks very cool but it's unclear which parts you actually get in the download. I've wanted to build a vector for a 'The Division' project but I'm not sure if this is for the internal bits and pieces or whether it's the actual casing and the internals - I'd ideally just need the external (casing) parts so I could build a prop weapon but I can't tell from these images


Vous souhaitez soutenir Cults ?

Vous aimez Cults et vous avez envie de nous aider à continuer l’aventure en toute indépendance ? Sachez que nous sommes une petite équipe de 3 personnes et qu’il est donc très simple de nous soutenir pour maintenir l’activité et créer les futurs développements. Voici 4 solutions accessibles à tous :

  • PUBLICITÉ : Désactivez votre bloqueur de publicité AdBlock et cliquez sur nos bannières publicitaires.

  • AFFILIATION : Réalisez vos achats en ligne en cliquant sur nos liens affiliés ici Amazon ou Aliexpress.

  • DON : Si vous voulez, vous avez la possibilité de nous faire un don via PayPal ici.

  • BOUCHE À OREILLE : Invitez vos amis à venir découvrir le site et les magnifiques fichiers 3D partagés par la communauté !