Aller au contenu

Timesquare Watch Body: Circling the Square

Qualité de la création : 5,0/5 (1 vote)
Évaluation des membres sur l'imprimabilité, l'utilité, les détails, etc.
  • 1,2k vues
  • 1 j'aime
  • 37 téléchargements

Description du modèle 3D

The Adafruit community has been enjoying the new TIMESQUARE DIY Watch kits ( so much that we wanted to offer another fun activity for our community to enjoy!

Adafruit's Matt Griffin took a stab at making a watch enclosure that transforms the right angles of the original kit into quite a different friendly, organic shape. And what's more this can be attached to the strap of a backpack or worn as a necklace fob or pocket watch.

This example design project also includes all of the files and references you need to create your own derivative TIMESQUARE enclosure. Read more about the TIMESQUARE DIY Watch Kit - Red Display Matrix here:

Paramètres d'impression 3D


Assemble your TIMESQUARE watch kit, taking care to solder your components fairly close to the PCB.
Download and print out TIMESQUARE CirclingTheSquare.stl (or TIMESQUARE CirclingTheSquare_StrapFob.stl for pocket watch/fob) using your favorite 3D printer. We tend to slice it at .25 or .20mm layer height, with 1 extra shell. More news as we print more of these in-house and share what we learn!
Print a pair of the TIMESQUARE_RoundButton_Small.stl buttons and TSbar.stl strap bars.
Print out one each of the TIMESQUARE CircleTheSquareBackplate_Slits.stl and TSbuckle.
Clear away the support material from main enclosure ("frontplate") and the back of the buckle.
Slide the Small Buttons into the two rounded openings on the side of the watch enclosure, pushing from the inside out so that the rectangular end faces the interior of the watch enclosure. You might want to tape them in place (from the outside) to make sure they don't slide into the enclosure during the next step.
Insert your button battery and then place your electronics into your case. Press it firmly, carefully up into the faceplate.
Test your buttons -- the feet of both Small Buttons should press the buttons attached to the PCB.
ATTACHING A STRAP OR FOB Locate a ribbon or thin strap that is approx. 20mm across (3/4" will do nicely!) and thread a loop through one of the large strap bays at the top or bottom of the watch and then pull the loop tight with the TSbar inserted to lock the strap in place.

Note that you can insert the TSbar on the inside for a pocket watch or fob attachment (please insert TSbar and fob strap before electronics for easier handling) or on the outside to loop the strap down across the backplate to pin the electronics when configured as a watch for wrist or backpack straps.

There are a number of configurations possible, but the best for small arms is to use the backplate to thread the strap out through the middle slots. Larger arms, legs, and other objects might benefit from the outer slots. In any configuration you can use a combination of the TSbar pieces and the backplate to thread the strap across to lock the backplate against the electronics.

  • Format du fichier 3D : STL
  • Dernière mise à jour : 2017/05/27 à 21h00
  • Date de publication : 2015/02/21 à 13h54



Designs 366
Téléchargés 42,3k
Abonnés 802

Adafruit was founded in 2005 by MIT engineer, Limor "Ladyada" Fried. Her goal was to create the best place online for learning electronics and making the best designed products for makers of all ages and skill levels. Since then Adafruit has grown to over 25 employees in the heart of NYC. We've expanded our offerings to include tools, equipment and electronics that Limor personally selects, tests and approves before going in to the Adafruit store. We pride ourselves on having great prices, the best customer service, technical support and fast shipping. We hope we can assist you on your journey of learning - At Adafruit we celebrate engineering happiness!



Collection associée à ce modèle 3D

Meilleures ventes de la catégorie Mode

Ajouter un commentaire

Un commentaire

Vous souhaitez soutenir Cults ?

Vous aimez Cults et vous avez envie de nous aider à continuer l’aventure en toute indépendance ? Sachez que nous sommes une petite équipe de 3 personnes et qu’il est donc très simple de nous soutenir pour maintenir l’activité et créer les futurs développements. Voici 4 solutions accessibles à tous :

  • PUBLICITÉ : Désactivez votre bloqueur de publicité AdBlock et cliquez sur nos bannières publicitaires.

  • AFFILIATION : Réalisez vos achats en ligne en cliquant sur nos liens affiliés ici Amazon, Gearbest ou Aliexpress.

  • DON : Si vous voulez, vous avez la possibilité de nous faire un don via PayPal ici.

  • BOUCHE À OREILLE : Invitez vos amis à venir découvrir le site et les magnifiques fichiers 3D partagés par la communauté !