Aller au contenu

Makes réalisés par la communauté

Vous avez imprimé en 3D ce modèle ?

Star Wars ATST Walker - Prêt à imprimer - avec notice

Description du modèle 3D

Le modèle sur les photos a été réalisé en filament PLA de 1.75 mm couleur argent sur une imprimante Anycubic I3 mega. Les couches font 0.1mm . Le modèle est au 1/50 et est composé de 36 références de pièces différentes. Pour réaliser l'assemblage, il faut se munir de 19 vis CHC M3 x 10 (ISO 4762) et de 19 Ecrou H M3 (ISO 4762) comme indiqué sur la notice. Le modèle est complètement articulé. N’hésitez pas à me contacter pour plus d'info ou me faire part de vos retours.

Paramètres d'impression 3D

PLA
temperature d'impression 200 °C
temperature plateau 60°C
couche 0.1 mm
Supports - fonctions des pièces voir notice

  • Format du fichier 3D : ZIP

Mots-clefs

Créateur

Abonnés 2 Abonnements 0
Téléchargements 3
Ventes $22

Copyright

©

Fichiers 3D similaires


Ajouter un commentaire

11 commentaires

Hello, did you receive the files I sent last saturday?

Ok, will do that next saturday. Best regards.

Also I'm a bit confused would you not just need to send me a peg the diameter of the screw? I can scale the peg to the same percentage as the rest of the model then. :)

Ok, I'll prepare you a multiple parts solid model (step format). I just need to see how I share it with you because it will be to big to send by E-mail. Best regards.

And no its not super small, the peg would be fine if i scaled it down with the rest of the parts. Multiple pieces over one solid model would be better for the purpose as i want to sla some parts for detail and fdm the rest. Thanks for the reply!

No problem, I can e-mail it to you fi you give me an adress. What is the scale you want to use? If you want to make it a lot smaller, a plastic shaft won't work (the diameter will be to low), in this case I'll send you the full ATST model and you'll have to print it in one pièce, with supports, and it won't be articulated. I will not be available until friday, so I will probably send you that saturday or sunday. Best regards.

That would be great thanks, how would I obtain that? Would I have to re-download the file?

Hello, the model is about 280 mm tall (scale 1/50). If you want to scale it, you won't be able to assemble it with the standard screws. In this case, I can design a printable shaft to replace the screws, but you'll have to glue the parts to assemble it.

How tall is it when assembled? i want to print it for Legion so i need to scale it to the rest of the figures