Aller au contenu

Juggernaut de la Pestilence

?
Qualité de la création : 3,8/5 (8 votes)
Évaluation des membres sur l’imprimabilité, l'utilité, les détails, etc.
  • 25,2k vues
  • 157 j’aimes
  • 205 téléchargements

Description du modèle 3D

Voici un Juggernaut de la pestilence, Vous recevez le modèle tel que vu sur la photo avec 2 variations du torse . Vous pouvez l'utiliser dans n'importe quel jeu de figurines. Modelé pour s'adapter à une base de 60mm. Base non incluse.

  • Les fichiers pré-supportés sont inclus

  • Les scènes Chitubox sont incluses

  • Les pièces sans supports sont également incluses.

La licence est personnelle seulement. Les modèles ne peuvent être vendus.

Paramètres d'impression 3D

J'ai obtenu les meilleurs résultats en utilisant mon imprimante à résine avec un mélange de Siraya tech fast grey et tenacious ou Siraya tech blue.

  • Format du fichier 3D : PDF, STL, TXT et ZIP
  • Dernière mise à jour : 2021/06/19 à 2h29
  • Date de publication : 2021/05/17 à 22h08

Copyright

©

Mots-clefs

Créateur

Designs 6
Téléchargés 261
Ventes 5 277 US$
Abonné·es 366
Page traduite par traduction automatique. Voir la version originale.
Vous rencontrez un souci avec ce design ? Signaler un problème

Makes réalisés par la communauté

Meilleures ventes de la catégorie Jeu


Ajouter un commentaire

15 commentaires

Excellent looking kit. But has anyone else had issues with the pre supported files on a mini 4k? I'm printing the torso and arms currently, torso came loose of the supports about half way through the print and pieces of the arms failed as well

I have printed if dozens of time on my mighty 4k and never once have I had a failed torso. The new pre-supported files have been test more than once without any fail. Have you tried, supporting it yourself? Is your printer calibrated for the resin you are using?

Yes it's been calibrated. I'll mess with it more over the week and see what I can do.

Sometimes my printer just decides no. Not entirely sure why, I'll.have weeks of perfect prints then this.

If I may ask, what resin are you using? I'm elegoo abs

I was able to repair it with Netfabb a software in Lychee. I do have Chitubox, just prefer Lychee. It looks like it repaired so I'll give it another shot and let you know. This is probably just an issue with Lychee.

  • 1 j’aime

You could also try the V03 but the support have not been tested yet.

ok in that case you have the right model. This might be related to something in Lychee that i am not familiar with. All I can tell you is thatI have had zero problems when slicing in Chitubox. And I have printed about 15 of them. Perhaps you could try to slice it in Chitubox. Other than that you could perhaps try to contact me on Facebook but I am not familiar with all the slicing softwares.

V02 I believe, this was preupdate.

Getting weird extra pieces printing when its sliced in Lychee. The model prints well except 15 extra pieces like 2" long connected to the torso.

Done, I have added optimised version of these three files. One supported and one not supported. Please keep in mind that under such short notice I could not test the supports, I will as soon as possible. So you can also make your own with the unsupported files.

Is it possible to compress the files? The torso and legs especially are huge files that my Lychee is struggling to deal with, even compared to larger equally detailed files

Thanks!

Thank you so much, could you contact me on facebook, I would like to know where your failed so that i can upload a new file. If you have time of course.

I also ran into the arm support issue, however it was a very easily fixed by just taking the unsupported arms and adding new supports.

Model is fantastic, exactly what I was looking for.

You are the first to report such a problem. I have printed more than 15 myself without any issues. You can contact me on Facebook and we can try to solve the problem.

A really good work.
Littles problems with arms presupported files two 14hours prints failled....

Thank you for the comment. For the moment, this is the loadout since it is the best loadout in my opinion for competitive play. If there is a better loadout that pop out as a very competitive one, that will probably happen at some point. If and when I add some, they will be uploaded for free of course.

Are there any weapon options planned?


Vous souhaitez soutenir Cults ?

Vous aimez Cults et vous avez envie de nous aider à continuer l’aventure en toute indépendance ? Sachez que nous sommes une petite équipe de 3 personnes et qu’il est donc très simple de nous soutenir pour maintenir l’activité et créer les futurs développements. Voici 4 solutions accessibles à tous :

  • PUBLICITÉ : Désactivez votre bloqueur de publicité AdBlock et cliquez sur nos bannières publicitaires.

  • AFFILIATION : Réalisez vos achats en ligne en cliquant sur nos liens affiliés ici Amazon ou Aliexpress.

  • DON : Si vous voulez, vous avez la possibilité de nous faire un don via PayPal ici.

  • BOUCHE À OREILLE : Invitez vos amis à venir découvrir le site et les magnifiques fichiers 3D partagés par la communauté !