Aller au contenu

Camera Gimbal

Vous avez imprimé en 3D ce modèle ?

Description du modèle 3D

Simple camera gimbal for timelapse and stop motion photography, or motion control.

Let's you accurately position your camera in two axis or move through a pre-programmed sequence. Home switches make position control repeatable even after loss of power.

Paramètres d'impression 3D

Most parts should print without supports (except cableJunction and motorMountA). Some larger parts can benefit from a small brim though, depending on your print setup.

I printed most structural parts with a wall thickness of 2mm and 1mm top/bottom to get the desired rigidity. This can be tweaked depending on your requirements and application.

https://youtu.be/nn_uQ0SR7XY

Assembly

Use a good epoxy to join the parts that are printed in multiple parts. (Tip: leave one or both arms unglued for easier assembly)

The small pinion gears (SpurGearM1x16) work but not for very long, at least not with PLA, forces on these are quite strong. They will get you going but metal versions of them can be had for extremely cheap from China/Ebay (search for M1T16 pinion gears).
I switched mine out after a while and it's working very well every since.

You'll also need:
4x 6000 Series deep groove ball bearings (OD 26mm ID 10mm Depth 8mm)
2x Nema17 stepper motors (mine are 17HS8401, 1.8A)
1x 10mm aluminium tube or similar metal shaft
2x proximity sensors M12 (optional, mine are LJ12A3-4-Z/BX)
The cable junction is proportioned to accept 3 mini XLR type sockets.

Let me know if I forgot to mention anything else.

Oh, it's designed to fit my D3400 with cables sticking out. I don't have a full frame camera so am not sure what other models will fit on it. Let me know if your camera fits and what model it is.

Enjoy! And let me know if you do anything cool with it.

  • Format du fichier 3D : STL

Mots-clefs

Créateur

License

CC BY NC SA

Fichiers 3D similaires

Meilleures ventes de la catégorie Gadget


Ajouter un commentaire


Vous souhaitez soutenir Cults ?

Vous aimez Cults et vous avez envie de nous aider à continuer l’aventure en toute indépendance ? Sachez que nous sommes une petite équipe de 3 personnes et qu’il est donc très simple de nous soutenir pour maintenir l’activité et créer les futurs développements. Voici 4 solutions accessibles à tous :

  • PUBLICITÉ : Désactivez votre bloqueur de publicité AdBlock et cliquez sur nos bannières publicitaires.

  • AFFILIATION : Réalisez vos achats en ligne en cliquant sur nos liens affiliés ici Amazon, Gearbest, Banggood, Aliexpress ou Ebay.

  • DON : Si vous voulez, vous avez la possibilité de nous faire un don via PayPal ici.

  • BOUCHE À OREILLE : Invitez vos amis à venir découvrir le site et les magnifiques fichiers 3D partagés par la communauté !