Aller au contenu

Vous avez imprimé en 3D ce modèle ?

Système de lave-vaisselle de douche interchangeable

Maker
Fichier 3D

Description du Make

Fits a 25mm shower riser tube.
Shower riser tube to wall clearance needs to be at least 25mm. 30mm recommended.

Sliced in Simplify3D

SETTINGS -

The ASA tray print settings are -
Layers: 0.12mm, 8 top, 4 bottom, 3 shells
Infill: 70% Full Honeycomb
Support: None
Print Temperature: 230°C
Bed Temperature: 90°C
Cooling: None
Speed: 35mm/s

ABS dishes -
Layers: 0.14mm, 6 top, 4 bottom, 2 shells
Infill: 50% Full Honeycomb
Support: Yes. 35%, extra inflation 0.6mm, resolution 1mm, 45°, 2 dense layers at 90%
Print Temperature: 235°C
Bed Temperature: 90°C
Cooling: None
Speed: 45mm/s

POST PROCESSING -

Acetone-smoothing: I acetone-smoothed/polished to improve water-tightness/resistance and improve the general appearance.

The method I used is documented here - https://rigid.ink/blogs/news/acetone-vapor-smoothing

Filament

rigid.ink
  • Raft : Non
  • Résolution : 0,12 mm
  • Température : 230 °C
  • Support : Non
  • Remplissage : 70 %
  • Vitesse : 35 mm/s

Ajouter un commentaire