Aller au contenu

visage humain masculin

?
Qualité du make : 0,0/5 (0 votes)
Évaluation des membres sur la qualité de l’impression 3D, du post-traitement, de la photo, etc.
Maker
Fichier 3D

Description du Make

I used this as a baseplan for a treatment phantom for measuring movement of the patient when treated with radiation.
I made a slightly smaller copy to define the inner sides and added mounting holes for metal balls, motorization for movement and ionchambers.
I removed the back to make a flat surface and make easy access to the inside fixings.
I used Tinkercad to define and adapt the figure, and Cura to slice.
Cura used about 25 minutes to slice and generate support, and it then was a 7 days and 8 hours print.
I used glue at the heated bed (60 degrees C) to make absolutely sure it stayed in place.
Thanks to SHUKTUKI1960 for sharing model

Imprimante 3D

CreatBot DX Plus

Filament

Tough PLA
  • Résolution : 0,2 mm
  • Température : 265 °C
  • Remplissage : 50 %
  • Vitesse : 50 mm/s

Ajouter un commentaire

Un commentaire

I have not printed this but it is my sculpt, it is nice to see it as a real object