
Has anyone had a successful print of this? (SMALL DOOR CUT-STONE FOR OPENFORGE AND OPENLOCK) if so what on and what settings? I and a friend of mine have both tried with no luck at all.
- 0 me gusta
Atención amigos, esto no es un mensaje privado sino un hilo de discusión público. Es un lugar de intercambio, gracias por ser cortés y respetuoso. Cualquier solicitud comercial o maliciosa será eliminada. Si mencionas un diseño en particular, no dudes en añadir el enlace o el título del diseño en tu mensaje para que la conversación pueda ser dirigida adecuadamente. Si quieres adjuntar fotos a tu post, no dudes en subir tus imágenes a un servicio gratuito de alojamiento de imágenes en línea como Imgbb y copia/pega los enlaces a tus imágenes en tu comentario. Tengan una buena discusión!
Has anyone had a successful print of this? (SMALL DOOR CUT-STONE FOR OPENFORGE AND OPENLOCK) if so what on and what settings? I and a friend of mine have both tried with no luck at all.
Sorry for the extremely late reply. I originally published this on thingiverse and don't think to check here often. This is one of my earliest models and a bit rough. I've successfully printed this on an Ender 3 using the default profiles in Cura using tree supports set to touching buildplate. It might print without support with the experimental bridge settings turned on but I haven't personally tested that.