Ir al contenido

Atención amigos, esto no es un mensaje privado sino un hilo de discusión público. Es un lugar de intercambio, gracias por ser cortés y respetuoso. Cualquier solicitud comercial o maliciosa será eliminada. Si mencionas un diseño en particular, no dudes en añadir el enlace o el título del diseño en tu mensaje para que la conversación pueda ser dirigida adecuadamente. Si quieres adjuntar fotos a tu post, no dudes en subir tus imágenes a un servicio gratuito de alojamiento de imágenes en línea como Imgbb y copia/pega los enlaces a tus imágenes en tu comentario. Tengan una buena discusión!

Escribe tu mensaje:

32 commentarios

bonjour , comment puis je remplir la forme pour quelle ne soit pas vide?

bonjour , comment puis je remplir la forme pour quelle ne soit pas vide?

Hola, he comprado/descargado 6 modelos y no se abre el archivo. Alguien me puede ayudar, por facir. Gracias.

Hola, cuales?? Pasame tu mail y te los mando!

Hi. I just purchased a polymer cutter file from you to print, it's great..however I also need this file in a mirrored version so that I can make the other pair to the earring. Is this something you're able to do? I cannot just mirror it in Makerbot as it doesn't have the sharp edges. Thanks.

thanks for the feedback!

are the earring one piece or two pieces?

one

Hey i want to buy the cutters, do the files include mirror images?

I would also like the mirror image to the file I just purchased. The would be great.

thanks for the feedback!

My cutters dont work for me, please sned me your email address.

how?

What are the slicer settings for the 24 pk of earrings. It looks like they all do not use the same settings. It took me hours to build a slicer profile for the earrings you had on Thingiverse. I assumed that it would work on the other ones. So please help me out. It took me days and lots of filament to get a good slicer profile.

I normally use layers of 0.25 and print with PLA so temp 195°, bed 40. fill 25-30%, shell 0.8. I hope that helps!

Hi, You have a cutter design on thingyverse (well the picture) and it doesn't appear in any of your 12 designs that I bought.
Its the wonky looking long drop

Mel

Hi Mel, check the second pack. All of them are here

Hey love your designs, I want to purchase your files. Wondering if I can use the images as well since you have done such a good job with them?

no

I ordered the cutter. Cutter is nice but would be great if there would be symetric 2nd Earring too. With just one design its hard to make otherone.

Hello, i'll take note to that. Which one? you can try flipping it over. That way you save material from printing an extra cutter

  • 1 me gusta

Hello,
I just purchased cutter number 21 and there is an error on the STL file. It will come up on the slicer that there is an error with the inner cutter and when printed it does not have a smooth edge so not good for cutting. Can you look at this and update the file?

sure! its fixed now

Thanks! How do I download the new file without paying again?

Hello, I recently purchased some of your polymer cutter files, which I love, but have found them to be too thick and they don't cut through the clay very well particularly if you are putting plastic wrap over the clay to create rounded edges. Do you have a thinner version of your cutters available? I would also be interested in quite a few of them in a smaller size too. Regards, Anna

Hello, I recently purchased some of your polymer cutter files, which I love, but have found them to be too thick and they don't cut through the clay very well particularly if you are putting plastic wrap over the clay to create rounded edges. Do you have a thinner version of your cutters available? I would also be interested in quite a few of them in a smaller size too. Regards, Anna

hi! please help me with your whatsapp number i want to get stl files desgined
writing to you from india

Hi Gabriella
first, i love your earrings. Thats why i used them as inspiration for my polymer clay cutter designs. These cutters are an original creation of mine.
As for the pictures, i didnt mean to bother you, i found them on pinterest, sorry abt that. I'm no longer using them!
Thank you for telling me!

Hello. This is Gabriela, owner of Hello Zephyr. It was brought to my attention that you are selling 3 of my designs of which my company has the copyright. You are also using pictures from my website without my permission and this is illegal. I kindly ask you to remove these designs from your shop. Shapes 7, 16 and 18.

Thanks a lot for the kind comments, it makes me happy to know you like them!

I'm currently working on a second set of 15 new designs

And after that, i'm going to make a smaller size set of the best-sellers, please let me know which are your favourites.

Regards to everyone!
Marts

Hi! can you help me the sizes of the cutters. the description is confusing.
and writing to you to see if youll be interested in designing stl files for me regularly.

thanks and best regards

Hello. I just purchased your DIY furniture brackets. They’re great and I’m very pleased with the design. Is there any chance you might be able to provide a single 60deg bracket without the 180 on the other side? I tried to modify it in my slicer but it won’t look as nice as your 90 & 120 deg brackets. Would be very helpful for the project I’m making. Thanks!

Hello, I downloaded and made this cutter tonight. It came out without a sharp edge and unable to cut through the clay cleanly. I love your designs and want to get them all but want to work out why it isn't printing correctly for me.
Thank you.
Cris

Hi I love your cutters! is there any way to get them in smaller sizes? I am trying to make earrings and some are just too big:/

I purchased your 12 pack of cutters. Is it possible to get them all scaled to 50% like number 5? We are trying to make earrings and some are just too big and when I scale them in the slicer the cutting edge gets too small to print.

I purchased the 12 pack of the organic shapes clay cutters and did not get a single STL file, just PDF's. I'm new to this, so am I not doing something correctly?

Hello, for your organic jewelry #5 would you be able to make the regular size and one half it’s size? Beautiful designs!