Ir al contenido

Atención amigos, esto no es un mensaje privado sino un hilo de discusión público. Es un lugar de intercambio, gracias por ser cortés y respetuoso. Cualquier solicitud comercial o maliciosa será eliminada. Si mencionas un diseño en particular, no dudes en añadir el enlace o el título del diseño en tu mensaje para que la conversación pueda ser dirigida adecuadamente. Si quieres adjuntar fotos a tu post, no dudes en subir tus imágenes a un servicio gratuito de alojamiento de imágenes en línea como Imgbb y copia/pega los enlaces a tus imágenes en tu comentario. Tengan una buena discusión!

Escribe tu mensaje:

5 commentarios

Hi, I bought the airtag model and the locking does not fit between the two part. This is without the Airtag just trying to fit the two pieces together

Hey! The parts should fit without scaling or adjusting. Just make sure your settings match what’s listed on the product page and you’re printing slow. These have been test printed across multiple printers so it shouldn’t be an issue with the model.

Hi there. I bought the airtag model and the large one doesn't seem to fit onto the airtag. Is there something I should do to make it fit?

Hello!
My first guess would be the AirTag might just be the wrong way around in the Grommlet. It only fits one way since the AirTag isn’t symmetrical.

Other than that just make sure to follow the layer height listed on the product page and print slowly. I have a completely stock printer with a 0.4mm nozzle so there shouldn’t be anything special you need to do.
I hope that helps!

Hello. For your "CAT SCRATCHER BOARD STRIPPER" I am unable to print the small screw on a .2mm nozzle at .15mm. Is there a print setting are able to share with me so I can successfully print it please? Thank you for your time.

Thanks for the message! Unfortunately this this the only version of the board stripper there is. I printed with the standard E3D 0.4 mm brass nozzle so you should have no problem with a smaller nozzle. Maybe try printing slower? Sorry I can’t be of more help.

Answered on the Grommlet product page

Hello, I really like the design for the airtag grommet but I had an issue where the airtag didn't fit and when i forced it one of the locking pieces of the print broke off. do we need to scale up the model at all? Thank you