28 commentarios

Hi Dear Sir,
I just downloaded your scrooge / Dagobert Duck Model where he is jumping in money, unfortunately, it is not printable and also I can't auto repair it. I tried both in Cura 5.3.1 and SuperSlicer for M1 MacPro. It shows different faults like not beeing watertight and also some message that it contains over one million triangles per part (in 5 parts in total).
Could you please tell me in which program you got it to work, or please refund because it is not printable, I use a self built Voron 2,4 and I print 3D for over 4 Years now.

Hi, recently I purchased you yellow submarine model. I intended to use my Bambu x-1 carbon to print this out in multiple colors (vs hand paint the model)

However upon trying to do this the areas aren’t defined enough to be able to do this.

To try and set this up manually will take me forever, (in example, the 3 color “fans” on each side of the conning tower took several hours each and they still aren’t perfect!!) so I was wondering, are you able to define all the models edges?

I don’t know if what I’m saying makes any sense, but just as an example, with the periscopes, they have 3 colors and while I can set up the main color (yellow) if I try to “paint” the lens and bezel different colors, the entire piece changes to the color I’m currently trying to use.

I don’t know if this entails a lot of work to do this, but unfortunately I don’t possess the skills do do the necessary adjustments on my end.

If you can’t do this I understand, but if you can, I’d really appreciate the help!

If I could press you on one other thing, you split the “cloud” into 2 parts, would you be able to make a file where it can be printed in one piece? Just the cloud as it is now but just connected into one piece, I’ll still print out the separate items to add to the cloud.)

The reason I wanted this done is because I wanted to use a special variegated green filament (“Sea of green”) and printing it in 2 halves won’t allow the colors to match up, if that makes sense.

Thanks for your time and consideration.

Vinnie

Hi, recently I purchased you yellow submarine model. I intended to use my Bambu x-1 carbon to print this out in multiple colors (vs hand paint the model)

However upon trying to do this the areas aren’t defined enough to be able to do this.

To try and set this up manually will take me forever, (in example, the 3 color “fans” on each side of the conning tower took several hours each and they still aren’t perfect!!) so I was wondering, are you able to define all the models edges?

I don’t know if what I’m saying makes any sense, but just as an example, with the periscopes, they have 3 colors and while I can set up the main color (yellow) if I try to “paint” the lens and bezel different colors, the entire piece changes to the color I’m currently trying to use.

I don’t know if this entails a lot of work to do this, but unfortunately I don’t possess the skills do do the necessary adjustments on my end.

If you can’t do this I understand, but if you can, I’d really appreciate the help!

If I could press you on one other thing, you split the “cloud” into 2 parts, would you be able to make a file where it can be printed in one piece? Just the cloud as it is now but just connected into one piece, I’ll still print out the separate items to add to the cloud.)

The reason I wanted this done is because I wanted to use a special variegated green filament (“Sea of green”) and printing it in 2 halves won’t allow the colors to match up, if that makes sense.

Thanks for your time and consideration.

Vinnie

Okay cool! Thanks for getting back to me so soon!

Hi, great model you have! Can you provide me with the dimensions please? (Approximate is fine. I just want to get an idea on how big it is.)

Also, I’ve never bought a model from this site. If I do purchase it, how long would it take to obtain the files? Thanks for your time! -Vinnie

becassine ramasse des champignon

bonjour peut on l imprimer avec imprimente resine merci

Bonjour, j'ai récemment acheter votre modèle avec Obélix et le légionnaire, il se trouve que le bouclier ne s'imprime pas, dans le slicer les couches n'apparaissent même pas , je suis très embété.
Pourriez-vous m'aider svp ? merci d'avance
mail : sophe1202@gmail.com

Bonjour comment fait on pour modifier le texte svp? j'ai acheté le fichier mais je ne sais pas comment faire j'ai un fichier écrit name et un autre happy brithday

Utilisez cura avec 0.1 de hauteur de couche et ça passe sans soucis

bonsoir, j'ai un souci avec l'impression de votre modèle "Bécassine ".En effet le panier ainsi que le socle, présentent des manques(les champignons ). Dans le logiciel Chitubox, certains champignons apparaissent en noir et lors de l'impression ils sont manquant. Pouvez-vous remédiez à ce problème.

Hello...
Follow me on Cults3d to see my 3d designs !!!
💥💥👉 Everyday I upload new designs and once a week I also upload a free to download design.

👇 You can follow me here...
https://cults3d.com/en/users/Arlon/creations

Bonsoir, les cornes sont dans un fichier a part. imprimez les avec une bonne bordure bien large pour une bonne adherence

Bonjour, je ne trouve pas la corne d'Obelix dans le fichier en l'ouvrant avec Cura. Cdt

Bonjour, je souhaiterais utiliser une image de votre création Obélix pour un livre à paraitre sur l'impression 3D, comment puis-je vous contacter en privé ? Mathilde B.

ah ? c'est étonnant moi c'est passé comme une lettre à la poste ...

Hello I have a little problem printing on the top of the base, I do not know why all the other parts have been printed correctly, except the top of the base which makes a separation in the middle is this normal? I printed it in 3 times with different positions and each time it made me like separation supports in the middle of the stones.

Bonjour j'ai une petit soucis d'impression sur la partie du haut du socle, je ne sais pas pourquoi tout les autres pièces ont bien été imprimé, sauf le haut du socle qui fait une séparation en plein milieu est ce normal ? je l'ai imprimer en 3 fois avec des positions différentes et à chaque il me fait comme des supports de séparation en plein milieu des cailloux .

can you leave a positive message on the product page? it will help me and future buyers :)

With flipped normals, the shield printed beatifully! I am in process of priming and painting & will post a few pics once complete in the main thread. Thanks again!

Thank you for your feedback, I'm curious to see your result once you're done!
Thank you for your feedback on the normals, even if I am surprised, it is something that I check regularly ...

Thanks for the quick reply.

I have a SLA printer, so Cura doesnt work for me.

I did a bit of investigation just now (cancelled my previous response, as I essentially answered my own question). The shield has flipped normals! So I did a quick edit in MeshMaker and now it renders fine like all other pieces of your amazing diorama. I will print it now and see if I can get it out.

But might be worth in your end flipping the normals on the shield and reupload in the zip file.

Have a beautiful Sunday and stay safe!

print it with cura without any support, it's working very well.

Hi Foxgraph - I've bought your Obelix and its really great printing. But I do have problems printing the shield. Pulling it into MeshMixer or ChituBox it just shows up very "blurry" and printing produces nothing. I cannot make supports either.

Any hints?

Hey foxgraph,Your designs are really nice. You are really excellent designer. I wish i can get your email info!, hope I'll be in contact with you.