Ir al contenido

Atención amigos, esto no es un mensaje privado sino un hilo de discusión público. Es un lugar de intercambio, gracias por ser cortés y respetuoso. Cualquier solicitud comercial o maliciosa será eliminada. Tengan una buena discusión!

Escribe tu mensaje:

41 commentarios


Your mesh is very good, unfortunately it seems missing some parts: the cannons going into the circular slots located on top, the part filling the hole of the part “Astartes_Battlebarge_Body_Bottom” and finally the large part in length that goes under the front cannons and the main batteries.

Have you got the other missing parts of this mesh ? to my point of view three mesh are missing.
I'm able to give you some pictures of these details in order to to enlighten you on my request.

Thank you in advance,

PS: I also speak french if Needing.

Oops! I must specify that I am talking about this astrates battle barge: https://cults3d. com/fr/mod%C3%A8le-3d/art/astartes-battle-barge
Thank you.

Ah, the parts comes like that to allow unused resin to easily flow out during printing and cleanup, and keep the weight of the print down so it can more easily balance on a flight base.
The turrets themselves are found in

Thank you for your answer. I understand, it’s true that these “holes” were very convenient to remove the pillars. So does this mean that there is no additional mesh? Understood.
Thanks for the link, any turrets work or should we take one in particular ?
Thank you so much for your work, especially since you offer it for free. It’s awesome ! Your mesh library is very impressive. Keep going like this !
have a good day.

I recommend the Astartes Heavy turrets, but all will fit.

Got it ! I’ll try right away, thanks a lot.

Hey! Loving the designs, these are gorgeous models! Question: fresh off the printer, will these be scaled for normal 40k? The Lemoine Russel seems a little big to me, but I'm also new to the hobby and I've never built one before.

The Lemoine Russel & All-Purpose Carrier uploads are scaled for 40k. The Lemoine Russel is designed to be a bit longer than other Imperial Army battle tanks.

Gotcha. How does it compare size-wise to a GW Leman Russ?

It's about 2cm longer, but identical in width & height.

Okay I'll send later, thanks👍

You can message me via thingiverse. I don't check over there as often as here, so messages sometimes wait several days for a reply.

Hi, in my opinion you have the best designs for far future tanks out there! Is there a way to contact you privately?
Thanks Matt

Just the trench rails and dozer blade. Someone else did add-on exhaust pipes, but I cannot recall who.

Hello, I was just shown your files and I have to say they look great. I have several LRuss tanks I want to convert to DKOK. I see you have whole bodies. Do you happen to have just the add on parts?

Please tip me with pictures of any prints you've done. Success or fail, printed or not. Helps me see what works with different machines and it's always nice to see others actually making use of the designs.

Hi !
Just wanted to thank you for your amazing work ! Keep going !
Is there any place we can tip you ?

I'm sorry, but I am not interested in this at this time.

It is a cool idea though, best of luck finding someone who is.

I am looking for someone to design some armour for 8mm 40k Epic. I am starting an Ad Mech army and want to stick with a walker-tank theme. Would you be willing to design some non-copyright infringing units? I would need a Transport/Gorgon, Battle Tank/Leman Russ, Ordinatus Major & Minor.

It would be great if there was weapon options for the Ordinatus.

If this is something you would do, what would the cost be?

Thank you, I try my best to supply quality STCs.
I have not modelled a multilaser weapon for the IFV as I do not like how multilasers look.

Hi, sorry to bother you but I can't find the multilazer for the chimera anywhere. Am I being an idiot?

Also, phenomenal account you've got here!

I did not, I dislike the look of the multilaser and 2 bolters is twice the fun.

Did you ever make a version of the APC turret that has the multi laser and single heavy bolter options?

Some of the older epic scale files have been upscaled over on thingiverse. is one excellent example.
As for the newer stuff I've released, they are all downscales of NormalK I have already released so they should upsize just fine, with a small loss in some details. Just put them in meshmixer and uniformly scale to 4.99.

Has anyone upscaled the epic files to traditional 40K size? if so how did they come out?

There is, but it would be a very counterfeit baneblade.

Thanks for yours designs!!! any chance to see a baneblade ?

I'm not aware of any old genestealer cult weapons, I remember them sharing everything with the old Imperial Guard. That doesn't mean I won't though; I have a few old metal hybrids that are in need of arms.

Any chance you might tackle more RT weapons? Because I'd love the old Genestealer cultist weapons.

I hadn't, but I do like the idea of having straight analogues of the jarhead stuff.
Maybe one day in the future!

Hey man, nice work! Given any thought to making Prime sized heavy weapons, like melta, HB's, Las Cannons, etc...

You can upload pictures of your prints using the "make" button (below the download button on the mobile site)

I have seen people make and print versions with track guards as part of the design, but nobody has seen fit to share the files yet.

I'll likely be doing track guards when I have a computer again; I am hoping for the new year.

I'm loving your designs, currently smashing out a battle company on my little printer (6 successfully printed so far) id send you some pics of them but I'm not sure how to upload them.!

i am however having a job finding track guards to fit the sides, i wonder if you've a design kicking about for them or if you know someone else that has made some to fit your Tanks.

i know you don't do commission work but if you made some id be willing to pay for your time.

Haven't yet seen any 40k scale ones, sorry.

Hi, first of all, congratulations for your works!!! Is awesome and accurate, i want to do a question for you, has you any design of Carnodon Tank in 40k scale, not Epic??
Thank you and hope your answer...

Aliexpress is good for magnets if you do not mind month or longer delivery times.

Sorry, I don't intend any additional versions of the Lemoine Russel at this time. I won't rule it out though.

hey love the models. im trying to find the magnets you would use for the turrets and body, any good site to get the magnets?

I look forward to seeing your tanks! I don't own a printer myself so this is the best way of letting me know if I'm doing a good job designing things.

I have no current plans to do any Interstellar Army walkers, sorry.

My program is TinkerCAD, an extremely user-friendly browser-based CAD designer. I've tried learning blender, meshmixer and fusion360 and I have found them all too complicated.

I enjoy your work and was going to slide you a few Paypal dollars but your other profile said you didn't want tips. Fair enough! I'll post my pictures once I get some paint down on these tanks.
Had two questions though...
Will the Interstellar Army be getting Armored, Scout, and PowerLifter walkers?
What program are you doing work like the APC and SPG? Your output looks like what I want to accomplish so clearly your software is capable. I tried zBrush but found it lacking for hard surface modelling. Trying to learn Blender now.

Sorry, I don't do commissions. I've been known to do requests if the idea has tickled my fancy though.

Hi there mate
Im just flicking through this pm to see whether you do or are available for commission work?


Thank you, I'm glad you like them.

Thanks for the answer! Fantastic work on all of your modells!

Oh dear, I'm sorry I missed your message until now. I made the battlebarge open to cut down on materials, save weight (the test print in resin I have is very hefty) and make it easier for uncured resin to be removed.

I bought your battlebarge for BFG, fantastic work!
I have a questione though,
why is it open in the bottom? Both the front and the rear?

thanks in advance!

I have not yet. I have a turret for a similar vehicle in progress so far but that is it.

hey mate, did you ever do a transport hull for the all purpose carrier?