Ir al contenido

Atención amigos, esto no es un mensaje privado sino un hilo de discusión público. Es un lugar de intercambio, gracias por ser cortés y respetuoso. Cualquier solicitud comercial o maliciosa será eliminada. Si mencionas un diseño en particular, no dudes en añadir el enlace o el título del diseño en tu mensaje para que la conversación pueda ser dirigida adecuadamente. Tengan una buena discusión!

Escribe tu mensaje:

68 commentarios

sis. entiendo pero hay alguna forma de contactarse para mostrarte la imagen? sino te dejo mi contacto; celular: 2244423750 email: juaniredo@live.com

hola te compre el archivo stl de bob esponja el lapicero pero el cuerpo de abajo de bob esponja no esta entero quisiera una respuesta gracias

El modelo consta de 3 archivos STL uno que es “Cabeza Bob Esponja”, otro que es el “Cuerpo Bob Esponja” este es el que va abajo del anterior y forma su cuerpo y un tercero que se llama “Cajon Bob Esponja” y este se introduce en el anterior archivo para que quede como un pequeño cajon y también forma las piernas de bob esponja y los tres juntos forman la figura como en las fotos, espero haber resuelto tu duda.

Gracias por la bienvenida, como me dirijo con CULTS?

https://cults3d.com/es/contacto

Hasta debajo de la pagina principal hay un link de contacto para poder escribirles.

Saludos, voy comensando en este fascinante mundo de la impresion en 3D, acabo de adquirir mi impresora espero pronto diseñar y compartir mis trabajos.

El dia de ayer 25 de Agosto 2021, realize el pago de apoyo al crador, para descargar el archivo dela base para telefono celular de Ghostbusters con trampa, pero no me ha llegadp el correo de confirmacion para descargarlo. Me pueden orientar en que tiempo me aparecera en mi correo el enlace de descarga?

Saludos, y felicidades excelente trabajo.

Saludos LEFKARIMARAIZ, tengo entendido que si compras algo inmediatamente lo puedes bajar, aquí hay una sección en donde me deja ver las ventas que he hecho y ver quien, y que me han comprado, y no me aparece tu compra, lo mas seguro es que te tengas que comunicarte directamente con Cults.

Que bueno que te animaste ha entrar a este mundo de la impresión 3D yo igual compre mi impresora 3d y me puse a estudiar el Blender para hacer mis propios modelos, te esperan muchos retos por delante, pero la satisfacción de poder crear lo que se te ocurra, mucha suerte y gracias por comprar el modelo base para celular Ghostbuster.

Hola buenas tardes fíjate que compre el modelo de groot en columpio pero no deja descargar me tira un error tu sabes si tiene algún problema el archivo

Volví a subir los archivos por separado como estaban y también los subí todos en un ZIP, a ver si con esto ya te los deja bajar

hola fíjate que no deja me indica que el archivo esta dañado o pueda que no contenga ningún archivo

te dejo mi correo electrónico jasolare@hotmail.es para que me escribas y te envió lo que me indica al abrir los archivos

Listo ya te escribí para que me digas cual es el error que te sale

Hola buenas tardes fíjate que compre el modelo de groot en columpio pero no deja descargar me tira un error tu sabes si tiene algún problema el archivo

Saludos, gracias por comprar el modelo, déjame revisarlo...

  • 1 me gusta

ok muchas gracias

I can try printig with your specifications and see if that helps. I am close to what you are suggesting. Is is usually the tail that breaks on me. usually between the 4th and 5th joing from the end of the tail. It seems that the pin is stuck in the tail piece and breaks off because it does not turn. the last piece of the tail is also very stiff and won't move along with the head is very tight. I am using pretty good filament so I usually have my bed heated to about 50. Is that too high? I am printing with PLA.

Very well taking into account what you mention, I am going to modify the molding I will try to do it as soon as possible I will keep you updated by this means when I upload it.

Greetings Ross, an apology for the delay but in what I made changes to the model and I was printing it, I spend some time, ready I already uploaded the model with change in the joints I printed it with a layer height of 0.3 mm, a wall thickness of 0.8mm, 3 wall lines, 5% fill density, zigzag fill pattern, print speed 50mm / s, fill speed 50mm / s, scroll speed 120mm / s.

and another with the printing speed 35mm / s, filling speed 35mm / s.

In both cases it looks good, I hope you can print it well without any problem.

To compensate for the inconvenience, I upload my "LUIGI'S MANSION 3" model for a limited time.

Well I am on the lookout for any other problem I hope that no longer there lol, I say goodbye wishing you good afternoon.

I am printing the dragon, but it is not very flexable and want to break instead of moving. Can you tell me what I may be doing wrong in printing the model?

Ross

Greetings Ross, thank you for purchasing the model, I print it with 0.2mm layer height, 0.8mm wall thickness, 3 wall line count, 10% fill density, Zigzag fill pattern , print speed 30mm / s, fill speed 35mm / s, scroll speed 120mm / s.

Those are the parameters that I have used, what I have noticed is that you have to have good adhesion on the bed, it has happened to me that I have very low quality materials that I have to put a temperature of 60 c on the printing plate And these do not serve me because it makes the first layer of printing expand and makes the gaps that make the figure move stick, when I have had problems with adhesion I help myself with hairspray or adhesive pencil hehehe .

Can you tell me a favor if the whole piece breaks or is it in a specific place?

If you think that you have already applied these parameters and the figure still fails, tell me and give me a few days to solve it by redesigning the model.

Well I say goodbye, I send you a greeting and I am aware of your response.

Hello Mark. I've bought you ellie model and i found that the stls are only frame. What i should do?

Hello, I am reviewing and all the files I see well, the only thing I noticed is that CULTS no longer recognizes the .RAR files so I re-uploaded everything but now in .ZIP I hope that will solve what you tell me.

I uploaded a gif of how the files are.

thats perfect thank you so much

thats perfect thank you so much

Sorry dont get what you mean. the only file is a RAR file

Ready, you will be able to see the STL files and upload them

Ready, you will be able to see the STL files and upload them

thats great thanks. one question. is it possible to get the frame with just the beagle (snoopy). im happy to pay for the change.

I just uploaded an STL file called "Marco Solo con Snoopy" to see if this is how you want it :)

I down loaded. your snoopy photo frame then realised its a RAR file. is it possible to get it in an STL file?

cheers
Lezlie

Greetings Lezlie, yes of course, leave it out of the Rar

Ready are the STL, out of the Rar

I down loaded. your snoopy photo frame then realised its a RAR file. is it possible to get it in an STL file?

cheers
Lezlie

Greetings Lezlie, yes of course, leave it out of the Rar

I down loaded. your snoopy photo frame then realised its a RAR file. is it possible to get it in an STL file?

cheers
Lezlie

Greetings Lezlie, yes of course, leave it out of the Rar

Greetings ENG_GIRL, Sure! Go ahead, I hope you have a lot of sales :)

Hi :)
I was hoping that you will allow me to sell prints of your flexi dragon and scorpion.
I would, of course, donate, each time I get a sale.

Greetings ENG_GIRL, Sure! Go ahead, I hope you have a lot of sales :)

Thank you, most appreciated :D

Greetings SKETCHMAN44 I already sent the STL to your email I hope it is what you expected, we are still here for anything else.

Greetings SKETCHMAN44 I already sent the STL to your email I hope it is what you expected, we are still here for anything else.

Greetings SKETCHMAN 44, sorry for the delay, if you are interested only in Luigi's backpack, I give you the STL file, send me an email where I can send you the file.

Hi there! I was wondering if I'd be able to purchase an STL file with just the Potergust backpack from your Luigi design? Thanks!

Greetings JIMMY CHATELAIN Thank you for buying the Groot model, I already uploaded the STL files in case there was a problem, please check it I hope you can download all three models.

bonjour, je viens de vous acheter le groote , mais malheureusement j'en ai qu'un sur les trois comment ça se fait?

Greetings Jason, Thank you for buying my model, an apology I have no experience in PETG everything that I have printed in PLA model, from the dragon modeling what I remember that I had a hard time solving was the mouth and the back legs, I'll upload some photos Of the little dragons that I printed they still have their tails and look that I have not treated them kindly hehehe already broke some tips of the tail, but that is my fault because I did several tests and put a layer height of 3mm and very little padding.

What I recommend is to print it with a 0.2mm layer height, 3 wall lines, a 10% infill and most importantly a not very fast printing speed, at most 30mm / s.

I hope this has helped you so that the tail does not break, if not, let me make it up to you. Do you like any other modeling that I have published? Send me your email on Instagram and I'll send it to you.