hola, la descarga me da error, el archivo esta mal
- 0 me gustas
👋 ¡Hola a todos! Este hilo es público, así que mantengámoslo bonito y respetuoso. ¡Nada de anuncios, spam o cosas desagradables!
🇮🇱 País del usuario: Israel
🌐 Idioma preferido del miembro: Inglés. Puedes traducir en línea a través de DeepL.
💡 ¿Te refieres a un modelo en concreto? Añade el enlace, el título o el número de modelo.
🖼️ ¿Quieres publicar fotos? Utiliza un host gratuito como ImgBB y pega los enlaces en el mensaje.
✍️ Consejos de escritura: Usa el formato Markdown para estructurar tus textos y hacerlos más legibles.
Escribe tu mensaje:
49 commentarios
Hello! Just checked the file again by downloading if & open in BambuLab Slicer - the 3mf includes color painting of the clouds, maby it's to heavy for your PC? Uploading STL file for you but it's even larger. Update me on results. As you can see from the pictures- I sucsessfully printed it so the files are ok, let's try too help you manage the error: can you send me a screenshot of the error to: eleton.designs@gmail.com
- 0 me gustas
hello first thanks for the nice cute skelet stl
i have printed the cape and the body but i cant get it in the cape .i printed in pla and look very nice but cant get the body inside the cape
can you tell me please what i doing wrong greethings anne
- 0 me gustas
Hello, so that the process:
1. Take the cape
2. Insert the head (youll need to put it on angle first and then push it throw)
3. From buttom of the cape insert body in 45deg & then twist it inside
4. Insert arms from sleeves
- 0 me gustas
מקום ראשון... כבוד!
- 1 me gusta
Bonjour
Comment ave vous enboite la tete sur le corp ainssi que les bras ? sa ne risque pas de ce casse ? Merci
- 1 me gusta
Bonjour, Just find center point behind the Sphere (with your finger) & push the arm or head in there. Trim a side of a sphere if you see it's hard to enter (but it fits good)
- 0 me gustas
Is the skeleton stl bambu mf3 file to print? Or would you suggest another 3d printer?
- 1 me gusta
Hey, it modeled in peaces- so you can print every couple of modeles by their color. Maby later will make - combined wversion!
- 0 me gustas
Bonjour
Faut t il mettre des supports pour l impression ? Merci
- 1 me gusta
I think it’s better to print Body - standing (with supports), head laying on back with supports
- 0 me gustas
Hello, could you create a cover for the optical sensors of the dji avata?
- 1 me gusta
Hey! I can do any customisation that you would like - send me a mail to eleton.designs@gmail.com
- 0 me gustas
Hey, I really like your designs. I am looking for an O3 mount similar to what you have already designed but this mount would attach to a flat surface on an RC airplane like shown in the fpvdogfight link below, except in O3 vs the older airunit. I would need the integrated antenna holder as shown and a mounting tab/feet on each corner so I can mount to either balsa or run screws through, make sense? The other requirement would be to make enough room for a heat-sink. This would be very popular for FPV planes as they are becoming very popular. Appreciate any help, thanks!
https://cults3d.com/en/3d-model/gadget/dji-o3-unit-antenna-mount
https://shop.iflight-rc.com/quad-parts-cat20/DJI-O3-VTX-Heatsink-Pro1915?limit=75
https://fpvdogfight.com/products/motionsic-b-a-g-badass-gimbal
- 2 me gustas
Hey, I do custom modeling for clients - so yes we can do it. Write me a mail will all the info (plate with screws dimentions) and maby some more info on the linkes that you sent. Send it to: eleton.designs@gmail.com
P.S. I do charge hour price for a custom modelling, at the end you'll get the 3D model with all the author rights
- 0 me gustas
Hi E-leton, I bought DJI O3 Unit Mount APEX STL files from you but fond it unusable. It is 4mm short. Could you make for me another STL 4mm longer? The other dimensions are right. I would appreciate it ASAP, please. Send it to my email: robert.bulko@gmail.com. Thanks
Regrds, Robert
- 1 me gusta
Sure! Will make the changes and send it!
- 0 me gustas
thank you :)
- 0 me gustas
sent the files. Sorry for inconvenience
- 0 me gustas
Hi, I have no idea how to get O3 air unit in. Any suggestion? Thanks.
Robert
- 1 me gusta
Hey, what model are we talking about?
- 0 me gustas
never mind, I cut it in half but it was unusable anyway "DJI O3 Unit Mount APEX"
- 0 me gustas
Wow - can you send me some pics where to make the changes?
- 0 me gustas
Updated the files - try the fixed one. Sorry for inconvenience
- 0 me gustas
does this screw in with m3 hardware or m2?
- 1 me gusta
m2 if you ask about DJI cam
- 0 me gustas
Hi sorry mate the question was for your dji o3 air unit mount?
- 0 me gustas
So it's M3 for holding the mount
- 1 me gusta
Yes please, want to attach it to my Botgrinder frame via the 20x20 mounting holes
- 0 me gustas
Hey there! Just downloaded your o3 unit mount (the one without the antenna) and after printing the wider version, the o3 wouldn’t fit, it’s wider but it is narrower as well. I am going to try to print the original later to make sure it’s not just me lol.
- 1 me gusta
Tested them both - they fit. Are you sure you have calibrated extrusion multiplayer? Printing with Flex materials? Don't you worry - we will find the solution that will work for you ^^
- 0 me gustas
Hi there , I have the impulse rc version and I think I now know the problem, mine is the hd version which has a wider backside, I think perhaps letting people know which version your advertising might help i feel it’s a bit of a waste as it doesn’t fit plus I paid someone to print it, to say I’m disappointed would be an understatement, I guess I should of realised there would be a difference but the penny didn’t drop till a min ago
- 2 me gustas
Glad that we found what was the problem, sir. All I want - is a happy client - so i made a refound for your purchase of the model, hope it'll give you back some of the loses of your mistake ^^ For your advise: as you can see in the post - I pointed out that it's a regular (not HD, DC, etc mode) Apex frame, so covered it by that. But, Thank you!
- 0 me gustas
I’ve purchased this print and it doesn’t fit the rear of the frame ! It only fits the front of the frame where the cam is mounted, what a waste of time and money, why would you design it this way ?
- 1 me gusta
Hey, Sorry to hear that you had problems. All the designs that I make - I test before I post, so let's try to undestand where is the problem & i'll gladly try to help you ^^ Apre you sure you have the Regular Apex (Not DC or some clone) frame? (The parts are made for the rear side, some of the parts holds with ziptie - wich model did you use? (Uploded couple versions there)
- 0 me gustas
Can I sell the 3d print I made?
- 1 me gusta
I rather not, but it's up to you to decide I think
- 0 me gustas
hello sorry i have purchased your file for avata support gopro printing, but when i 3d print with prusa printer and run prusa slicer the part always breaks, i run with prusa PETG filament and 90% .can you help me ? thanks
or if is posible for you give me the file gcode please and slicer
- 1 me gusta
Hey, sorry to hear that. Be sure the file is ok - so let's try to get your settings right. Prusa PETG on prusa runs great - just you have to get all the colling not more than 30%! It's very important with PETG! Don't know why in prusa's stock profile it's not
- 0 me gustas
hello sorry i have purchased your file for avata support gopro printing, but when i 3d print with prusa printer and run prusa slicer the part always breaks, i run with prusa PETG filament and 90% .can you help me ? thanks
- 1 me gusta
Answered in next message. You accidentally posted twice ^^
- 0 me gustas
Lol i downloaded for the camera model, and it is not even included. what a fail/ shame that you put this 5 min work for sale :P
- 1 me gusta
Lol, you could just politely ask... If you need the Cam model - would gladly send to you. Just send me a mail to : eleton.designs@gmail.com
- 0 me gustas
For your information, it's very important to print the legs with translucide TPU (uncolored) because any colors contain carbone and graphite because this to products reduce the radio transmission! Best regards, Dr JL MONIEZ, PARIS, jean loup.moniez@icloud.com
- 2 me gustas
Wow, thanl you for the Info! Edited the make & added your important info about TPU! thank you!
- 0 me gustas
Hi! I purchased and printed the Avata leg guards in TPU and they do fit great, but how are they meant to be attached? With just a little movement they fall off and I'm concerned they would fall off during the first flight. Did you use some adhesive like superglue or hot glue?
- 1 me gusta
Hey, I used some 2sided tape on one side from inside. As things that could work- hot glue (will make good bound and will not damage the avata) or some tip of other glue
- 0 me gustas
How’s it going sir. You seem like you are great at designing. I’m looking for a o3 air unit mount with elrs rx antenna mount for the GRL (gravity loss FPV) pro 2 titanium frame
- 1 me gusta
Hey! I make custom models but it'll cost you about 30$ for it. If you into it - will model it & send the file via mail. For now - i'll try to see if i can find some model that have the Standoffs dimention & sizes. If not - will have to ask you to measure it
- 0 me gustas
Let’s do it. If you need measurements let me know.
- 0 me gustas
Send me an email with all the info to: eleton.designs@gmail.com & i'll start to work
- 0 me gustas
Hey this print keeps failing. It's like a layer or two is missing. The print separates at the gopro mount half way up and is very weak there.
- 1 me gusta
Had printed it an many slicers - so will gladly help you with your trouble! Be sure the file is not damaged & I tested it. Give me more Info on your Printer & Slicer. Maby send some picture
- 0 me gustas
I'm using a Qidi X-one 2 and the Qidi slicer. My prints never have issues like this where layers are missing and the print comes apart. How do i send pics?
- 0 me gustas
About 180 users downloaded and printed it as myself. So there is a problem with the slicers settings I think. Can you provide some screens of slicer settings or a failed print that I can try to help you with that?
- 0 me gustas
How do i post images??
- 0 me gustas
send it to my mail: eleton.designs@gmail.com
- 0 me gustas
Hello, I just bought your alien mask and it is missing the main body of the alien part.
- 1 me gusta
ONE PIECE - 3D PRINTABLE RESIN MODEL
Explore the world of "One Piece" in a whole new dimension with this meticulously crafted 3D printable model. Designed with precision and attention to detail, this resin-ready model brings your favorite "One Piece" characters or objects to life in three dimensions.
3d model link: https://cults3d.com/en/3d-model/jewelry/one-piece-3d-printable-resin-model