Ir al contenido
AF_Inventions
@AF_Inventions
Cuenta certificada
¿Qué significa el símbolo «Cuenta certificada»?
Cuenta certificada
Compartir esta cuenta

Bring my inventions to life with 3D printing! Commercial license is available on Thangs

Descargando Popular Vendedor Diseñador Influenciador Makes

👋 ¡Hola a todos! Este hilo es público, así que mantengámoslo bonito y respetuoso. ¡Nada de anuncios, spam o cosas desagradables!
🇮🇹 País del usuario: Italia
🌐 Idioma preferido del miembro: Inglés. Puedes traducir en línea a través de DeepL.
💡 ¿Te refieres a un modelo en concreto? Añade el enlace, el título o el número de modelo.
🖼️ ¿Quieres publicar fotos? Utiliza un host gratuito como ImgBB y pega los enlaces en el mensaje.
✍️ Consejos de escritura: Usa el formato Markdown para estructurar tus textos y hacerlos más legibles.

Escribe tu mensaje:

👉 Inicia sesión para escribir un mensaje

42 commentarios

wolftoysss
wolftoysss

merhaba ben steve ve enderman dosyasını indirdim akşam baskıya verdim oğlum da çok heyecanlandı ama birleştirmeyi anlayamadım yani bu takılcak mı eksik aparatıfı mı var yoksa yapıştırma mı olcak kafam çok karıştı yardımcı olur musunuz?

AF_Inventions
AF_Inventions

Hello! Everything is written in the description of each post. Thank you very much.
MCozzy
MCozzy

I have sent a purchase request at a special price.

AF_Inventions
AF_Inventions

I did not receive the request. Please contact me by email: af.inventions.info@gmail.com or Instagram: AF_Inventions. Thnak you!

  • 1 me gusta
MCozzy
MCozzy

Hi! I just sent you a new offer for the BEAUTY BOX at $1.74.
I really like your design and hope you can accept this price 😊
retrofrito
retrofrito

Hey greetings, thanks for the design of these coasters. Do you have a source for the wood or cork circles? I see some on Amazon but not the right size.

  • 1 me gusta
AF_Inventions
AF_Inventions

Hello! Write me on email please! af.inventions.info@gmail.com
Thanks
SCansiz
SCansiz

Hello,

I really like your design. I’m planning to 3D print it using PLA filament on my personal printer and potentially sell a small number of physical copies.

I’d like to ask if it would be possible to obtain a commercial use license for this model.

In addition, I’d appreciate if you could provide a few technical details:

Is this model suitable for printing with PLA?

Do you have an estimate of the printing time and filament usage?

Please let me know your terms, and any cost if applicable.

Thank you in advance!

Best regards.

  • 1 me gusta
AF_Inventions
AF_Inventions

Good morning, thank you very much for your interest!

Regarding the sale of my designs, I recommend clicking on the link in the description of each of my designs, which will take you directly to Thangs.

On Thangs, you can purchase my commercial licence directly and access all my designs.

Let me know if you need anything else!

PS: I can't see which design you are referring to, so I don't know how to answer you. Could you tell me which design you are talking about? Thank you.

ALFI
emz6387
emz6387

I bought the all string flex kits as think they are great but but the arms/legs etc don’t stay attached just with piece of filament? Do you glue them in? Also a piece of filament for flower doesn’t fit in the hole in flower/arm? What thickness filament do you use for this? Also what type of filament do you use to make the kit bag - just normal pla?

  • 1 me gusta
AF_Inventions
AF_Inventions

Hi, thanks for this comment, always appreciate outside viewpoints, they serve to improve.
I suggest you read the description of my designs, it says I use TPU and need to glue it with a dot of super glue or plastic glue. This is for customizing your string-flexes as you like.
As for the arm where the filament might not go in, it can happen, maybe the first layer in contact with the plate closed the hole slightly. I recommend that you rotate a razor blade inside the hole, low pressure, after which the filament will enter perfectly.
For the box I have used either PLA or PETG, it is indifferent. Some poor quality materials may break.
Thanks again for the message, let me know if you still need or succeeded!
ALFI
davedyke
davedyke

I have ordered and downloaded the file for the Q-tip Crossbow and was told I got the updated file but I still can not get theprogram to run correctly. I am a amateur in the 3D printing world and I use UltiMaker Cura 5.8.1 for my Ender-3 Max Neo printer. However every time I try to set you file up in Cura It loads extremely out of proportion. It's way too large to even see or use. Is there anyway you can help me get this to load correctly in my Cura so I can print it with my Ender printer??
armenzeitoun
armenzeitoun

Hi, I love your Jewelry Cactus. I just downloaded the files. Can this design (all the pieces) be scaled up?
Thank you

  • 1 me gusta
AF_Inventions
AF_Inventions

Hello! Thank you so much for the support! I've never tried scaling it, so I couldn't tell you! If you scale it a few inches in my opinion it's fine, if you scale it too much it may not work properly. How many cm would you like to scale it down?

armenzeitoun
armenzeitoun

Hi! Your piece is almost 8", I would like to scale it up to 10", from 100% to 130%. Do you think that would be an issue?
Also, what kind of supports do you recommend?

  • 1 me gusta
AF_Inventions
AF_Inventions

In my opinion, there should be no problem. No supports, you print without supports! Happy printing!!!

armenzeitoun
armenzeitoun

Thank you!!!

  • 1 me gusta
conorlavelle
conorlavelle

hi i was thinking about your heat chain does it print with the chain or not?
cps
cps

thanks,,,
cs

  • 1 me gusta
cps
cps

Hi -
Just downloaded the 'fridge flowers' and I have 2 questions - 1) I find no stems included (or mention of them); 2)What's an "arbust?"

  • 1 me gusta
AF_Inventions
AF_Inventions

The flower stem is a piece of filament. Arbust is a shrub, a bush.

morellimario
morellimario

hola, tenes el diseño de los string-flex de san valentin?

AF_Inventions
AF_Inventions

Yes of course!! Here https://linktr.ee/afinventions
perrictus
perrictus

Hi! i wanted to print your gear keychain. However my print didn't work. Should i print it without supports? Do you recommend any settings?
lapalmep
lapalmep

Hi ! I just print cryptex for my students (I made an escape game and use your cryptex for it).
Possible for you to do the same design with 3 rings ?

Many thanks.
rolfrjs
rolfrjs

Is it posibel to get permission to sell the models I print of your designs.. ?

merry christmas to you
DuncanIdaho
DuncanIdaho

Hi Filippo, just bought the SD Cabinet design, and seems that it is missing the ROD, instead the STL contains a door, can you shed some help here? Thanks and great design!