Ir al contenido

Hot Rod North American P-51D Mustang fighter

Descripción del modelo 3D

This is a personal version of what would be for me the hot rod version of North American Aviation P-51 Mustang trying to include details of classic American cars of the 40´s.

Here is the story of this iconic fighter plane:
https://en.wikipedia.org/wiki/North_American_P-51_Mustang

I recommend you print it with your favorite colors!!!

It is a model that requires a little more time than a single print piece but in my opinion the result is spectacular.
I hope you like it as much as I do and that you enjoy its printing and assembly.
I have tried to simplify the design of the pieces to facilitate their printing and assembly.
In total there are 33 pieces.

The terrible video of the assembly!!... although it is quite simple and intuitive.

https://youtu.be/qRjqrjO7t2M

Parámetros de impresión 3D

First I will indicate the CURA general print settings and then detail them for each piece

Nozzle: 0.4 mm

Layer Height: 0.2 mm
Line Width: 0.33 mm

Wall Line Count: 3
Top/Bottom Pattern: According to piece.
Initial Layer Horizontal Expansion: -0.2

Infill Density: 20%

Infill Speed: 60 mm/s
Outer Wall Speed: 20 mm/s
Inner Wall Speed: 35 mm/s
Top/Botton Speed: 30 mm/s

Support: According to piece
Support Over Hang Angle: According to piece
Support Density: 15%
Support Interface Thickness: 0.6 mm
Support Interface Density: 65%
Use Towers: No

Printable parts:
IMPORTANT!! See photos for the print position of each piece.

  • 1xBody_A: Aprox.Time: 13 h. Material: 147 gr.
    Top/Bottom Pattern: Lines
    Support: Yes
    Support Over Hang Angle: 87º
    Recommended filament: Polyalchemy Elixir Silver or Fillamentum Rapunzel Silver.

  • 1xBody_B: Aprox.Time: 7 h. Material: 86 gr.
    Top/Bottom Pattern: Lines
    Support: Yes
    Support Over Hang Angle: 87º
    Post Procesing / Pause at height (change colour): 20mm, 38mm, 56mm, 74mm, 92mm, 110mm.
    Recommended filament: Polyalchemy Elixir Silver or Fillamentum Rapunzel Silver, Traffic Black and Traffic White.

  • 1xBody_Front: Aprox.Time: 4 h. Material: 42 gr.
    Top/Bottom Pattern: Lines
    Support: Yes
    Support Over Hang Angle: 85º
    Recommended filament: Polyalchemy Elixir Rush Gold or Fillamentum Gold Happens.

  • 1xAxle_Front_Left and 1xAxle_Front_Right: Aprox.Time: 4 h. Material: 40 gr.
    Top/Bottom Pattern: Lines
    Support: NO
    Post Procesing / Pause at height (change colour): 21.8mm, 24mm.
    Recommended filament: Fillamentum Vertigo Grey and Polyalchemy Elixir Silver or Fillamentum Rapunzel Silver.

  • 1xExhaust_Left and 1xExhaust_Right: Aprox.Time: 1 h. Material: 8 gr.
    Top/Bottom Pattern: Lines
    Support: NO
    Post Procesing / Pause at height (change colour): 16mm.
    Recommended filament: Fillamentum Vertigo Grey and Polyalchemy Elixir Silver or Fillamentum Rapunzel Silver.

  • 1xSpinner: Aprox.Time: 38 min. Material: 6 gr.
    Top/Bottom Pattern: Lines
    Support: NO
    Post Procesing / Pause at height (change colour): 7.8mm, 15.6mm, 23.4mm.
    Recommended filament: Fillamentum Traffic Black and Polyalchemy Elixir Rush Gold or Fillamentum Gold Happens.

  • 1xAxle_Rear: Aprox.Time: 2 h.30 min. Material: 24 gr.
    Top/Bottom Pattern: Lines
    Support: YES
    Support Over Hang Angle: 65º
    Recommended filament: Fillamentum Vertigo Grey.

  • 1xCockpit_Seat / 1xCockpit_rear / 1xJoint_Body_A_B / 1xJoint_Axle_Front / 1xJoint_Rear_Rim_Half / 1xJoint_Spinner_Body_Front: Aprox.Time: 3 h. Material: 26 gr.
    Top/Bottom Pattern: Lines
    Support: NO
    Recommended filament: Fillamentum Vertigo Grey.

  • 2xFront_Tire / 1xRear_Tire: Aprox.Time: 5 h. Material: 48 gr.
    Top/Bottom Pattern: Concentric
    Support: NO
    Recommended filament: Fillamentum Traffic Black.

  • 2xFront_Tire_White_Stripe / 1xRear_Tire_White_Stripe: Aprox.Time: 4 h. Material: 38 gr.
    Top/Bottom Pattern: Concentric
    Support: NO
    Recommended filament: Fillamentum Traffic White.

  • 2xFront_Rim: Aprox.Time: 3 h.. Material: 30 gr.
    Top/Bottom Pattern: Lines
    Support: YES
    Support Over Hang Angle: 85º
    Post Procesing / Pause at height (change colour): 19.6mm.
    Recommended filament: Fillamentum Nobble Blue and Polyalchemy Elixir Silver or Fillamentum Rapunzel Silver.

  • 2xRear_Rim_Half: Aprox.Time: 2 h.. Material: 18 gr.
    Top/Bottom Pattern: Lines
    Support: NO
    Post Procesing / Pause at height (change colour): 10.6mm.
    Recommended filament: Fillamentum Nobble Blue and Polyalchemy Elixir Silver or Fillamentum Rapunzel Silver.

  • 2xHubcap: Aprox.Time: 11 min. Material: 2 gr.
    Top/Bottom Pattern: Concentric
    Support: NO
    Recommended filament: Polyalchemy Elixir Silver or Fillamentum Rapunzel Silver.

  • 1xWindshield: Aprox.Time: 11 min. Material: 1 gr.
    Top/Bottom Pattern: Lines
    Support: NO
    Recommended filament: Fillamentum Crystal Iceland Blue.

  • 2xJoint_Rim_Axle_Front / 1xAir_Intake_Body_A / 1xAir_Intake_Body_Front: Aprox.Time: 13 min. Material: 2 gr.
    Top/Bottom Pattern: Lines
    Support: NO
    Recommended filament: Fillamentum Traffic Black.
    1xRear_Light: Aprox.Time: 1 min. Material: 1 gr.
    Top/Bottom Pattern: Concentric
    Support: NO
    Recommended filament: Fillamentum Ruby Red.

TOTAL 33 Pieces.

  • Formato de modelo 3D : STL

Palabras-clave

Creador

Licencia

CC BY NC ND

Modelos 3D similares

Los más vendidos de la categoría Variado

Contenidos correspondientes


Añadir un comentario

Un comentario

I am really enjoying the level of intricacy in this little model. It is nice to be able to put the printer out to do its paces with fun projects like this!


¿Te gustaría apoyar Cults?

¿Te gustan Cults y quieres ayudarnos a continuar la aventura de forma independiente? Tenga en cuenta que somos un equipo pequeño de 3 personas, por lo que es muy sencillo apoyarnos para mantener la actividad y crear futuros desarrollos. Aquí hay 4 soluciones accesibles para todos:

  • PUBLICIDAD: Deshabilite su bloque de anuncios AdBlock y haga clic en nuestros banners.

  • AFILIACIÓN: Haga sus compras en línea haciendo clic en nuestros enlaces de afiliados aquí Amazon, Gearbest, Banggood, Aliexpress o Ebay.

  • DONACIÓN: Si lo desea, puede hacer una donación a través de PayPal aquí.

  • PALABRA DE BOCA: Invita a tus amigos a venir, descubre la plataforma y los magníficos archivos 3D compartidos por la comunidad!