Ir al contenido

Nave espacial abandonada y dañada compatible Equipo de asesinos o pequeños juegos de pasillo

?
Calidad de creación: 5,0/5 (3 votos)
Evaluación de los miembros: imprimibilidad, utilidad, detalles, etc.

Diseñador

Descripción del modelo 3D

¡Este es mi WIP actual para ustedes! ¡Para todas sus necesidades de equipo de asesinato y abordaje de barcos!

El actualmente terminado

-13 paredes de doble cara y las correspondientes puertas y bisagras.

-21 pilares de unión- para acomodar todos los ángulos necesarios.

-4 pilares de extremo de pared.

-14 aparatos diferentes

-4 tapas de cierre de pilar diferentes.

-3 Barricadas

-50+ bases temáticas de tamaños 25mm-80mm

TODAS optimizadas para imprimir con FDM con soportes MÍNIMOS.

Soportes para resina ahora incluidos.

FYI todos, voy a añadir las cosas más nuevas a este conjunto como actualizaciones gratuitas posteriores. una vez que tenga buenas fotos suficientes o copias de ella para recrear.

Incluí paneles de suelo adicionales (28 paneles en total)

-V1- Ranuras para imanes de 7 mm y un método de conexión básico de recorte cuadrado.

-V2- 7mmRanuras de imán ahuecadas para impresión en resina.

-V3- extraplano para conservar la mayor cantidad de resina.

Todo es TOTALMENTE compatible con los juegos de cajas.

**Queda por hacer.

-Chaos alterna.

¡Estoy trabajando activamente en este proyecto, así que estarán muy pronto!.

Como siempre, por favor enviar cualquier o todos los comentarios o peticiones para este conjunto. Si este va bien, voy a estar haciendo similares "extranjero" conjuntos temáticos, así.

NOTA

Estos archivos son para uso personal bajo una licencia no comercial en vigor para todos los modelos que libero en mi sitio web. -Creative commons Reconocimiento-NoComercial-SinObraDerivadaCC BY-NC-ND

***Sugerencias para la impresión

***EL JUEGO DE LAS CARTAS:

-Paredes 2x cada pared (excepto A4_1(2), úsalo sólo si quieres una alternativa de A4_1)

-Tapas de pared x30

-Puertas 2x cada puerta

-Bisagra 8xIzquierda, 2xDerecha

-Pilares extremos x2

-Pilares de unión fourwayx8, threewayx16 (imprima los otros sólo si desea opciones alternativas. Ej:Imprimí ángulo 4x90° para cuando quiero esquinas).

-Aparatos:

-Para ITD x2 cada uno (la válvula para C3 y C5 necesita ser impresa x4.)

-Para SV x2 cada uno, excepto sólo uno de cada robot.

-Barricadas x2 de cada.

BA:

Es 2x la mayoría de las partes, excepto para los aparatos y barricadas. usted no necesita ya sea a menos que desee.

-Muros 4x cada muro (excepto A4_1(2),
solo
utilizalo si quieres una alternativa de A4_1)

-Tapas de pared x60

-Puertas 4x cada puerta

-Bisagras 16xizquierda, 4xderecha

-Pilares x4

-Pilares de unión cuatrox16, tresx32

Estimaciones de volumen de resina (estas estimaciones son por una unidad):

-Pared:25ml

-Pilar:20ml

-Puertas y bisagras soportadas:10ml

-barricadas soportadas 10-15ml

-tapas soportadas: 3ml

-suelo de baldosas: 35-55ml

Si está imprimiendo con FDM (extrusión de plástico):

Muy pocos archivos necesitarán soportes en absoluto. Las paredes y los detalles en las paredes fueron diseñados con FDM en mente por lo que la mayoría tienen un ángulo en la parte inferior. Pero, Doorways y algunos de los aparatos pueden necesitar un soporte mínimo.

Si va a imprimir con SLA (resina):

He añadido archivos Presupported para la mayoría de las secciones. He probado impreso todos ellos con pleno éxito. Pero se que todo el mundo tiene el potencial de una impresora quisquillosa, asi que si tienes problemas, contactame en cults o enviame un Email, Warlock3dmodels@gmail.com. Intentaré ayudar lo mejor que pueda.

Nota: Todos los archivos están diseñados con FDM en mente, por lo que casi todos los archivos también imprimir directamente en la cama de impresión (paredes y pilares, al menos, fácilmente imprimir directamente en la cama), aunque puede terminar con pata de elefante en los modelos. **Imprimiendo directamente en la cama de impresión puede ser difícil de quitar si no tienes una cama flexible.


Parámetros de impresión 3D

Las secciones de pared con las puertas y algunos de los aparatos probablemente necesitarán soportes en la entrada, pero el resto del conjunto debería imprimirse sin soportes en impresoras FDM. Las puertas divididas son para FDM y las puertas enteras son para impresión en resina. (Pre-soportes aún por venir)

Si está imprimiendo con Resina, cualquier poco de sobreexposición aumentará demasiado el grosor de las pestañas por lo que también he incluido el archivo "Resin fitting" con pestañas más pequeñas para ayudar.

Información sobre el 3D archive

  • Formato de diseño 3D: STL y ZIP Detalles del fichero Cerrar
    • Apparatuses Set_1.zip
      • broken pipe.stl
      • C1.stl
      • C1_Hollow.stl
      • C2.stl
      • C3.stl
      • C4.stl
      • C5.stl
      • Easy print for FDM/Broken pipe_FDM clip off the under support.stl
      • Easy print for FDM/Overhead pipe_FDM print upside down and clip off side support.stl
      • Overhead pipe.stl
      • Resin print/Broken_pipe.stl
      • Resin print/C2.stl
      • Resin print/C3.stl
      • Resin print/C4.stl
      • Resin print/C5.stl
      • Resin print/Overhead_pipe.stl
      • Resin print/Supported/Broken_pipe.stl
      • Resin print/Supported/C1 hollow.stl
      • Resin print/Supported/C2.stl
      • Resin print/Supported/C3.stl
      • Resin print/Supported/C5.stl
      • Resin print/Supported/Overhead_pipe.stl
      • Resin print/Supported/Set_1.lys
      • Resin print/Supported/Valve for C3 and C5_Print 2.stl
      • Valve for C3 and C5.stl
    • Apparatuses Set_2.zip
      • Bomb hollow.stl
      • Bomb.stl
      • For Resin/Gun_wall.stl
      • For Resin/skull_aparatus.stl
      • For Resin/spotlight.stl
      • For Resin/Supported/Bomb.stl
      • For Resin/Supported/gun pile_1.stl
      • For Resin/Supported/Gun_wall.stl
      • For Resin/Supported/Set 2.lys
      • For Resin/Supported/skull_aparatus.stl
      • For Resin/Supported/spotlight.stl
      • gun pile_1.stl
      • Gun Robot/Easy cut for FDM/Gun Robot_4-Body_does_need_basic_supports.stl
      • Gun Robot/Easy cut for FDM/Gun Robot_4-Gun_left_1.stl
      • Gun Robot/Easy cut for FDM/Gun Robot_4-Gun_left_2.stl
      • Gun Robot/Easy cut for FDM/Gun Robot_4-Gun_right_1.stl
      • Gun Robot/Easy cut for FDM/Gun Robot_4-Gun_right_2.stl
      • Gun Robot/Easy cut for FDM/Gun Robot_4-Hitch_print_4.stl
      • Gun Robot/Easy cut for FDM/Gun Robot_4-Leg_left.stl
      • Gun Robot/Easy cut for FDM/Gun Robot_4-Leg_right.stl
      • Gun Robot/Easy cut for FDM/Gun Robot_4-Scope_1.stl
      • Gun Robot/Easy cut for FDM/Gun Robot_4-Scope_2.stl
      • Gun Robot/Easy cut for FDM/Gun Robot_4-Wheel_left.stl
      • Gun Robot/Easy cut for FDM/Gun Robot_4-Wheel_right.stl
      • Gun Robot/Gun Robot_4-Body.stl
      • Gun Robot/Gun Robot_4-Gun_Left.stl
      • Gun Robot/Gun Robot_4-Gun_right.stl
      • Gun Robot/Gun Robot_4-Scope.stl
      • Gun Robot/Supported for resin/Body.stl
      • Gun Robot/Supported for resin/Gun_Left.stl
      • Gun Robot/Supported for resin/Gun_Right.stl
      • Gun Robot/Supported for resin/Scope.stl
      • Gun wall.stl
      • Saw Robot/Easy cut FDM/Robot_1_EasyFDM.stl
      • Saw Robot/Easy cut FDM/Robot_1-FDM_Saw_with_magnet_1.stl
      • Saw Robot/Easy cut FDM/Robot_1-FDM_Saw_with_magnet_2.stl
      • Saw Robot/Easy cut FDM/Robot_1-FDM_Saw_with_pin_1.stl
      • Saw Robot/Easy cut FDM/Robot_1-FDM_Saw_with_pin_2.stl
      • Saw Robot/Robot_1.stl
      • Saw Robot/Robot_1-Resin_saw_magnet.stl
      • Saw Robot/Robot_1-Resin_saw_with_pin.stl
      • Saw Robot/Robot_1-saw_base.stl
      • Saw Robot/Robot_1-saw_pin.stl
      • Saw Robot/Supported for resin/Body.stl
      • Saw Robot/Supported for resin/Saw base.stl
      • Saw Robot/Supported for resin/Saw pin.stl
      • Saw Robot/Supported for resin/Saw with magnet hole.stl
      • Saw Robot/Supported for resin/Saw with pin.stl
      • skull aparatus.stl
      • spotlight FDM.stl
      • spotlight.stl
    • Barricades.zip
      • Barricade_1.stl
      • Barricade_2.stl
      • Barricade_3_1.stl
      • Barricade_3_2.stl
      • For Resin/Barricade_3_1_Hollow.stl
      • For Resin/Barricade_3_2_Hollow.stl
      • For Resin/Support for Resin/Barricade_1.lys
      • For Resin/Support for Resin/Barricade_1.stl
      • For Resin/Support for Resin/Barricade_2.stl
      • For Resin/Support for Resin/Barricade_3_1.stl
      • For Resin/Support for Resin/Barricade_3_2.stl
    • Bases 25-80mm.zip
      • 25mm/25mm-Base.stl
      • 25mm/25mm-Base_001.stl
      • 25mm/25mm-Base_002.stl
      • 25mm/25mm-Base_003.stl
      • 25mm/25mm-Base_004.stl
      • 25mm/25mm-Base_005.stl
      • 25mm/25mm-Base_006.stl
      • 25mm/25mm-Base_007.stl
      • 25mm/25mm-Base_008.stl
      • 25mm/25mm-Base_009.stl
      • 25mm/25mm-Base_010.stl
      • 25mm/25mm-Base_011.stl
      • 25mm/25mm-Base_012.stl
      • 25mm/25mm-Base_013.stl
      • 25mm/25mm-Base_014.stl
      • 25mm/25mm-Base_015.stl
      • 25mm/25mm-Base_016.stl
      • 25mm/25mm-Base_017.stl
      • 25mm/25mm-Base_018.stl
      • 25mm/25mm-Base_019.stl
      • 25mm/25mm-Base_020.stl
      • 25mm/25mm-Base_021.stl
      • 25mm/25mm-Base_022.stl
      • 25mm/25mm-Base_023.stl
      • 25mm/25mm-Base_024.stl
      • 25mm/25mm-Base_025.stl
      • 25mm/25mm-Base_026.stl
      • 25mm/25mm-Base_027.stl
      • 25mm/Topper/25mm-Topper.stl
      • 25mm/Topper/25mm-Topper_001.stl
      • 25mm/Topper/25mm-Topper_002.stl
      • 25mm/Topper/25mm-Topper_003.stl
      • 25mm/Topper/25mm-Topper_004.stl
      • 25mm/Topper/25mm-Topper_005.stl
      • 25mm/Topper/25mm-Topper_006.stl
      • 25mm/Topper/25mm-Topper_007.stl
      • 25mm/Topper/25mm-Topper_008.stl
      • 25mm/Topper/25mm-Topper_009.stl
      • 25mm/Topper/25mm-Topper_010.stl
      • 25mm/Topper/25mm-Topper_011.stl
      • 25mm/Topper/25mm-Topper_012.stl
      • 25mm/Topper/25mm-Topper_013.stl
      • 25mm/Topper/25mm-Topper_014.stl
      • 25mm/Topper/25mm-Topper_015.stl
      • 25mm/Topper/25mm-Topper_016.stl
      • 25mm/Topper/25mm-Topper_017.stl
      • 25mm/Topper/25mm-Topper_018.stl
      • 25mm/Topper/25mm-Topper_019.stl
      • 25mm/Topper/25mm-Topper_020.stl
      • 25mm/Topper/25mm-Topper_021.stl
      • 25mm/Topper/25mm-Topper_022.stl
      • 25mm/Topper/25mm-Topper_023.stl
      • 25mm/Topper/25mm-Topper_024.stl
      • 25mm/Topper/25mm-Topper_025.stl
      • 25mm/Topper/25mm-Topper_026.stl
      • 28mm/28mm-base_001.stl
      • 28mm/28mm-base_002.stl
      • 28mm/28mm-base_003.stl
      • 28mm/28mm-base_004.stl
      • 28mm/28mm-base_005.stl
      • 28mm/28mm-base_006.stl
      • 28mm/28mm-base_007.stl
      • 28mm/28mm-base_008.stl
      • 28mm/28mm-base_009.stl
      • 28mm/28mm-base_010.stl
      • 28mm/28mm-base_011.stl
      • 28mm/28mm-base_012.stl
      • 28mm/28mm-base_013.stl
      • 28mm/28mm-base_014.stl
      • 28mm/28mm-base_015.stl
      • 28mm/28mm-base_016.stl
      • 28mm/28mm-base_020.stl
      • 28mm/28mm-base_021.stl
      • 28mm/28mm-base_022.stl
      • 28mm/28mm-base_023.stl
      • 28mm/28mm-base_024.stl
      • 28mm/28mm-base_025.stl
      • 28mm/28mm-base_026.stl
      • 28mm/28mm-base_027.stl
      • 28mm/28mm-base_028.stl
      • 28mm/28mm-base_029.stl
      • 28mm/Toppers/28mm-topper_001.stl
      • 28mm/Toppers/28mm-topper_002.stl
      • 28mm/Toppers/28mm-topper_003.stl
      • 28mm/Toppers/28mm-topper_004.stl
      • 28mm/Toppers/28mm-topper_005.stl
      • 28mm/Toppers/28mm-topper_006.stl
      • 28mm/Toppers/28mm-topper_007.stl
      • 28mm/Toppers/28mm-topper_008.stl
      • 28mm/Toppers/28mm-topper_009.stl
      • 28mm/Toppers/28mm-topper_010.stl
      • 28mm/Toppers/28mm-topper_011.stl
      • 28mm/Toppers/28mm-topper_012.stl
      • 28mm/Toppers/28mm-topper_013.stl
      • 28mm/Toppers/28mm-topper_014.stl
      • 28mm/Toppers/28mm-topper_015.stl
      • 28mm/Toppers/28mm-topper_016.stl
      • 28mm/Toppers/28mm-topper_017.stl
      • 28mm/Toppers/28mm-topper_018.stl
      • 28mm/Toppers/28mm-topper_019.stl
      • 28mm/Toppers/28mm-topper_020.stl
      • 28mm/Toppers/28mm-topper_021.stl
      • 28mm/Toppers/28mm-topper_022.stl
      • 28mm/Toppers/28mm-topper_023.stl
      • 28mm/Toppers/28mm-topper_024.stl
      • 28mm/Toppers/28mm-topper_025.stl
      • 28mm/Toppers/28mm-topper_028.stl
      • 28mm/Toppers/28mm-topper_029.stl
      • 32mm/32mm-Base_001.stl
      • 32mm/32mm-Base_002.stl
      • 32mm/32mm-Base_003.stl
      • 32mm/32mm-Base_004.stl
      • 32mm/32mm-Base_005.stl
      • 32mm/32mm-Base_006.stl
      • 32mm/32mm-Base_007.stl
      • 32mm/32mm-Base_008.stl
      • 32mm/32mm-Base_009.stl
      • 32mm/32mm-Base_010.stl
      • 32mm/32mm-Base_011.stl
      • 32mm/32mm-Base_012.stl
      • 32mm/32mm-Base_013.stl
      • 32mm/32mm-Base_014.stl
      • 32mm/32mm-Base_015.stl
      • 32mm/32mm-Base_016.stl
      • 32mm/32mm-Base_017.stl
      • 32mm/32mm-Base_018.stl
      • 32mm/32mm-Base_019.stl
      • 32mm/32mm-Base_020.stl
      • 32mm/32mm-Base_021.stl
      • 32mm/32mm-Base_022.stl
      • 32mm/32mm-Base_023.stl
      • 32mm/32mm-Base_024.stl
      • 32mm/32mm-Base_025.stl
      • 32mm/32mm-Base_026.stl
      • 32mm/Topper/32mm-Toppers_001.stl
      • 32mm/Topper/32mm-Toppers_003.stl
      • 32mm/Topper/32mm-Toppers_004.stl
      • 32mm/Topper/32mm-Toppers_005.stl
      • 32mm/Topper/32mm-Toppers_006.stl
      • 32mm/Topper/32mm-Toppers_007.stl
      • 32mm/Topper/32mm-Toppers_008.stl
      • 32mm/Topper/32mm-Toppers_009.stl
      • 32mm/Topper/32mm-Toppers_010.stl
      • 32mm/Topper/32mm-Toppers_011.stl
      • 32mm/Topper/32mm-Toppers_012.stl
      • 32mm/Topper/32mm-Toppers_013.stl
      • 32mm/Topper/32mm-Toppers_016.stl
      • 32mm/Topper/32mm-Toppers_017.stl
      • 32mm/Topper/32mm-Toppers_018.stl
      • 32mm/Topper/32mm-Toppers_019.stl
      • 32mm/Topper/32mm-Toppers_020.stl
      • 32mm/Topper/32mm-Toppers_021.stl
      • 32mm/Topper/32mm-Toppers_022.stl
      • 32mm/Topper/32mm-Toppers_023.stl
      • 32mm/Topper/32mm-Toppers_024.stl
      • 32mm/Topper/32mm-Toppers_025.stl
      • 32mm/Topper/32mm-Toppers_026.stl
      • 32mm/Topper/32mm-Toppers_027.stl
      • 32mm/Topper/32mm-Toppers_028.stl
      • 32mm/Topper/32mm-Toppers_029.stl
      • 40mm/40mm-Bases_001.stl
      • 40mm/40mm-Bases_002.stl
      • 40mm/40mm-Bases_003.stl
      • 40mm/40mm-Bases_004.stl
      • 40mm/40mm-Bases_005.stl
      • 40mm/40mm-Bases_006.stl
      • 40mm/40mm-Bases_007.stl
      • 40mm/40mm-Bases_008.stl
      • 40mm/40mm-Bases_009.stl
      • 40mm/40mm-Bases_010.stl
      • 40mm/40mm-Bases_011.stl
      • 40mm/40mm-Bases_012.stl
      • 40mm/40mm-Bases_013.stl
      • 40mm/40mm-Bases_014.stl
      • 40mm/40mm-Bases_015.stl
      • 40mm/40mm-Bases_016.stl
      • 40mm/40mm-Bases_018.stl
      • 40mm/40mm-Bases_019.stl
      • 40mm/40mm-Bases_020.stl
      • 40mm/Toppers/40mm-Toppers_001.stl
      • 40mm/Toppers/40mm-Toppers_002.stl
      • 40mm/Toppers/40mm-Toppers_003.stl
      • 40mm/Toppers/40mm-Toppers_004.stl
      • 40mm/Toppers/40mm-Toppers_005.stl
      • 40mm/Toppers/40mm-Toppers_006.stl
      • 40mm/Toppers/40mm-Toppers_007.stl
      • 40mm/Toppers/40mm-Toppers_008.stl
      • 40mm/Toppers/40mm-Toppers_010.stl
      • 40mm/Toppers/40mm-Toppers_011.stl
      • 40mm/Toppers/40mm-Toppers_012.stl
      • 40mm/Toppers/40mm-Toppers_013.stl
      • 40mm/Toppers/40mm-Toppers_014.stl
      • 40mm/Toppers/40mm-Toppers_015.stl
      • 40mm/Toppers/40mm-Toppers_016.stl
      • 40mm/Toppers/40mm-Toppers_019.stl
      • 40mm/Toppers/40mm-Toppers_020.stl
      • 40mm/Toppers/40mm-Toppers_021.stl
      • 40mm/Toppers/40mm-Toppers_022.stl
      • 50mm/50mm-Base_001.stl
      • 50mm/50mm-Base_002.stl
      • 50mm/50mm-Base_003.stl
      • 50mm/50mm-Base_004.stl
      • 50mm/50mm-Base_005.stl
      • 50mm/50mm-Base_006.stl
      • 50mm/50mm-Base_007.stl
      • 50mm/50mm-Base_008.stl
      • 50mm/50mm-Base_009.stl
      • 50mm/50mm-Base_010.stl
      • 50mm/Toppers/50mm-Toppers_001.stl
      • 50mm/Toppers/50mm-Toppers_002.stl
      • 50mm/Toppers/50mm-Toppers_003.stl
      • 50mm/Toppers/50mm-Toppers_005.stl
      • 50mm/Toppers/50mm-Toppers_006.stl
      • 50mm/Toppers/50mm-Toppers_007.stl
      • 50mm/Toppers/50mm-Toppers_008.stl
      • 50mm/Toppers/50mm-Toppers_009.stl
      • 50mm/Toppers/50mm-Toppers_010.stl
      • 50mm/Toppers/50mm-Toppers_011.stl
      • 65mm/65mm-Base_001.stl
      • 65mm/65mm-Base_002.stl
      • 65mm/65mm-Base_003.stl
      • 65mm/65mm-Base_004.stl
      • 65mm/65mm-Base_005.stl
      • 65mm/65mm-Base_006.stl
      • 65mm/65mm-Base_007.stl
      • 65mm/65mm-Base_008.stl
      • 65mm/Toppers/65mm-Topper_001.stl
      • 65mm/Toppers/65mm-Topper_002.stl
      • 65mm/Toppers/65mm-Topper_004.stl
      • 65mm/Toppers/65mm-Topper_005.stl
      • 65mm/Toppers/65mm-Topper_006.stl
      • 65mm/Toppers/65mm-Topper_007.stl
      • 65mm/Toppers/65mm-Topper_008.stl
      • 65mm/Toppers/65mm-Topper_009.stl
      • 80mm/80mm-Base_001.stl
      • 80mm/80mm-Base_002.stl
      • 80mm/80mm-Base_003.stl
      • 80mm/80mm-Base_004.stl
      • 80mm/80mm-Base_005.stl
      • 80mm/80mm-Base_006.stl
      • 80mm/80mm-Base_007.stl
      • 80mm/80mm-Base_008.stl
      • 80mm/80mm-Base_009.stl
      • 80mm/80mm-Base_010.stl
      • 80mm/80mm-Base_011.stl
      • 80mm/toppers/80mm-Topper_001.stl
      • 80mm/toppers/80mm-Topper_002.stl
      • 80mm/toppers/80mm-Topper_003.stl
      • 80mm/toppers/80mm-Topper_004.stl
      • 80mm/toppers/80mm-Topper_005.stl
      • 80mm/toppers/80mm-Topper_006.stl
      • 80mm/toppers/80mm-Topper_007.stl
      • 80mm/toppers/80mm-Topper_008.stl
      • 80mm/toppers/80mm-Topper_009.stl
      • 80mm/toppers/80mm-Topper_010.stl
      • 80mm/toppers/80mm-Topper_011.stl
    • Cults_file_example_1.stl
    • Cults_file_example_2.stl
    • Cults_file_example_3.stl
    • Doors.zip
      • Easy FDM Doors/Finished walls-Hinge_Right.stl
      • Easy FDM Doors/Finished walls-split_doors.stl
      • Easy FDM Doors/Finished walls-split_doors_001.stl
      • Easy FDM Doors/Finished walls-split_doors_002.stl
      • Easy FDM Doors/Finished walls-split_doors_003.stl
      • Easy FDM Doors/Finished walls-split_doors_004.stl
      • Easy FDM Doors/Finished walls-split_doors_005.stl
      • Easy FDM Doors/Finished walls-split_doors_006.stl
      • Easy FDM Doors/Finished walls-split_doors_007.stl
      • Easy FDM Doors/Finished walls-split_doors_008.stl
      • Easy FDM Doors/Finished walls-split_doors_009.stl
      • Easy FDM Doors/Finished walls-split_doors_017.stl
      • Resin Doors/Door_1.stl
      • Resin Doors/Door_2.stl
      • Resin Doors/Door_3.stl
      • Resin Doors/Door_4.stl
      • Resin Doors/Door_5.stl
      • Resin Doors/Hinge_Left.stl
      • Resin Doors/Hinge_Right.stl
      • Resin Doors/Supported for Resin/Door_1.stl
      • Resin Doors/Supported for Resin/Door_2.stl
      • Resin Doors/Supported for Resin/Door_3.stl
      • Resin Doors/Supported for Resin/Door_4.stl
      • Resin Doors/Supported for Resin/Door_5.stl
      • Resin Doors/Supported for Resin/Doors supported for resin.lys
      • Resin Doors/Supported for Resin/Hinge_Left.stl
      • Resin Doors/Supported for Resin/Hinge_Right.stl
    • Floor Flat version_save resin.zip
      • Floor Flat-corner_001.stl
      • Floor Flat-corner_002.stl
      • Floor Flat-corner_003.stl
      • Floor Flat-corner_004.stl
      • Floor Flat-corner_005.stl
      • Floor Flat-corner_006.stl
      • Floor Flat-corner_007.stl
      • Floor Flat-corner_008.stl
      • Floor Flat-Middle_001.stl
      • Floor Flat-Middle_002.stl
      • Floor Flat-Middle_003.stl
      • Floor Flat-Middle_006.stl
      • Floor Flat-Middle_007.stl
      • Floor Flat-Middle_008.stl
      • Floor Flat-Middle_009.stl
      • Floor Flat-Middle_010.stl
      • Floor Flat-Middle_011.stl
      • Floor Flat-Middle_012.stl
      • Floor Flat-Middle_013.stl
      • Floor Flat-Middle_014.stl
      • Floor Flat-Middle_015.stl
      • Floor Flat-Middle_016.stl
      • Floor Flat-Side_001.stl
      • Floor Flat-Side_002.stl
      • Floor Flat-Side_003.stl
      • Floor Flat-Side_004.stl
      • Floor Flat-Side_005.stl
      • Floor Flat-Side_006.stl
    • Floor Hollow_magnet 7mm holes.zip
      • Dark Derelect ship floor-square_connector.stl
      • Floor-corner_001.stl
      • Floor-corner_002.stl
      • Floor-corner_003.stl
      • Floor-corner_004.stl
      • Floor-corner_005.stl
      • Floor-corner_006.stl
      • Floor-corner_007.stl
      • Floor-corner_008.stl
      • Floor-Middle_001.stl
      • Floor-Middle_002.stl
      • Floor-Middle_003.stl
      • Floor-Middle_004.stl
      • Floor-Middle_005.stl
      • Floor-Middle_006.stl
      • Floor-Middle_007.stl
      • Floor-Middle_008.stl
      • Floor-Middle_009.stl
      • Floor-Middle_010.stl
      • Floor-Middle_011.stl
      • Floor-Middle_012.stl
      • Floor-Middle_013.stl
      • Floor-Middle_014.stl
      • Floor-Side_001.stl
      • Floor-Side_002.stl
      • Floor-Side_003.stl
      • Floor-Side_004.stl
      • Floor-Side_005.stl
      • Floor-Side_006.stl
    • Floor basic_great for FDM 7mm magnet holes.zip
      • Corner_1.stl
      • Corner_2.stl
      • Corner_3.stl
      • Corner_4.stl
      • Corner_5.stl
      • Corner_6.stl
      • Corner_7.stl
      • Corner_8.stl
      • Dark Derelect ship floor-square_connector.stl
      • Middle_1.stl
      • Middle_10.stl
      • Middle_11.stl
      • Middle_12.stl
      • Middle_13.stl
      • Middle_14.stl
      • Middle_2.stl
      • Middle_3.stl
      • Middle_4.stl
      • Middle_5.stl
      • Middle_6.stl
      • Middle_7.stl
      • Middle_8.stl
      • Middle_9.stl
      • Side_1.stl
      • Side_2.stl
      • Side_3.stl
      • Side_4.stl
      • Side_5.stl
      • Side_6.stl
    • Joining pillars.zip
      • Dead end Pillars/Hollow/Pillars-end.stl
      • Dead end Pillars/Hollow/Pillars-end_001.stl
      • Dead end Pillars/Hollow/Pillars-end_002.stl
      • Dead end Pillars/Hollow/Pillars-end_003.stl
      • Dead end Pillars/Hollow/Supported for Resin/Pillars-end.lys
      • Dead end Pillars/Hollow/Supported for Resin/Pillars-end.stl
      • Dead end Pillars/Hollow/Supported for Resin/Pillars-end_001.stl
      • Dead end Pillars/Hollow/Supported for Resin/Pillars-end_002.stl
      • Dead end Pillars/Hollow/Supported for Resin/Pillars-end_003.stl
      • Dead end Pillars/Pillars-end.stl
      • Dead end Pillars/Pillars-end_001.stl
      • Dead end Pillars/Pillars-end_002.stl
      • Dead end Pillars/Pillars-end_003.stl
      • Hollowed joining pillars/Pillars 2-Hollow_A1.stl
      • Hollowed joining pillars/Pillars 2-Hollow_A2.stl
      • Hollowed joining pillars/Pillars 2-Hollow_A3.stl
      • Hollowed joining pillars/Pillars 3-Hollow_A1.stl
      • Hollowed joining pillars/Pillars 3-Hollow_A2.stl
      • Hollowed joining pillars/Pillars 3-Hollow_A3.stl
      • Hollowed joining pillars/Pillars 4-Hollow_A1.stl
      • Hollowed joining pillars/Pillars 4-Hollow_A2.stl
      • Hollowed joining pillars/Pillars 4-Hollow_A3.stl
      • Hollowed joining pillars/Pillars 90-Hollow_A1.stl
      • Hollowed joining pillars/Pillars 90-Hollow_A2.stl
      • Hollowed joining pillars/Pillars 90-Hollow_A3.stl
      • Hollowed joining pillars/Supported for resin/Pillars 2-Hollow_A1.stl
      • Hollowed joining pillars/Supported for resin/Pillars 2-Hollow_A2.stl
      • Hollowed joining pillars/Supported for resin/Pillars 2-Hollow_A3.stl
      • Hollowed joining pillars/Supported for resin/Pillars 3-Hollow_A1.stl
      • Hollowed joining pillars/Supported for resin/Pillars 3-Hollow_A2.stl
      • Hollowed joining pillars/Supported for resin/Pillars 3-Hollow_A3.stl
      • Hollowed joining pillars/Supported for resin/Pillars 4-Hollow_A1.stl
      • Hollowed joining pillars/Supported for resin/Pillars 4-Hollow_A2.stl
      • Hollowed joining pillars/Supported for resin/Pillars 4-Hollow_A3.stl
      • Hollowed joining pillars/Supported for resin/Pillars 90-Hollow_A1.stl
      • Hollowed joining pillars/Supported for resin/Pillars 90-Hollow_A2.stl
      • Hollowed joining pillars/Supported for resin/Pillars 90-Hollow_A3.stl
      • Hollowed joining pillars/Supported for resin/Presupp_Pillars-Hollow.lys
      • Hollowed joining pillars/Supported for resin/TPillars 2-Hollow_B1.stl
      • Hollowed joining pillars/Supported for resin/TPillars 2-Hollow_B2.stl
      • Hollowed joining pillars/Supported for resin/TPillars 2-Hollow_B3.stl
      • Hollowed joining pillars/Supported for resin/TPillars 3-Hollow_B1.stl
      • Hollowed joining pillars/Supported for resin/TPillars 3-Hollow_B2.stl
      • Hollowed joining pillars/Supported for resin/TPillars 3-Hollow_B3.stl
      • Hollowed joining pillars/Supported for resin/TPillars 4-Hollow_B1.stl
      • Hollowed joining pillars/Supported for resin/TPillars 4-Hollow_B2.stl
      • Hollowed joining pillars/Supported for resin/TPillars 4-Hollow_B3.stl
      • Hollowed joining pillars/TPillars 2-Hollow_B1.stl
      • Hollowed joining pillars/TPillars 2-Hollow_B2.stl
      • Hollowed joining pillars/TPillars 2-Hollow_B3.stl
      • Hollowed joining pillars/TPillars 3-Hollow_B1.stl
      • Hollowed joining pillars/TPillars 3-Hollow_B2.stl
      • Hollowed joining pillars/TPillars 3-Hollow_B3.stl
      • Hollowed joining pillars/TPillars 4-Hollow_B1.stl
      • Hollowed joining pillars/TPillars 4-Hollow_B2.stl
      • Hollowed joining pillars/TPillars 4-Hollow_B3.stl
      • Pillar Caps/joining pillars ITD-caps_001.stl
      • Pillar Caps/joining pillars ITD-caps_002.stl
      • Pillar Caps/joining pillars ITD-caps_003.stl
      • Pillar Caps/joining pillars ITD-caps_004.stl
      • Pillar Caps/Supported for resin/Caps.lys
      • Pillar Caps/Supported for resin/joining pillars ITD-caps_001.stl
      • Pillar Caps/Supported for resin/joining pillars ITD-caps_002.stl
      • Pillar Caps/Supported for resin/joining pillars ITD-caps_003.stl
      • Pillar Caps/Supported for resin/joining pillars ITD-caps_004.stl
      • Solid joining pillars/Pillars-_001.stl
      • Solid joining pillars/Pillars-_002.stl
      • Solid joining pillars/Pillars-_003.stl
      • Solid joining pillars/Pillars-_004.stl
      • Solid joining pillars/Pillars-_005.stl
      • Solid joining pillars/Pillars-_006.stl
      • Solid joining pillars/Pillars-_007.stl
      • Solid joining pillars/Pillars-_008.stl
      • Solid joining pillars/Pillars-_009.stl
      • Solid joining pillars/Pillars-_010.stl
      • Solid joining pillars/Pillars-_011.stl
      • Solid joining pillars/Pillars-_012.stl
      • Solid joining pillars/Pillars-_013.stl
      • Solid joining pillars/Pillars-_014.stl
      • Solid joining pillars/Pillars-_015.stl
      • Solid joining pillars/Pillars-_016.stl
      • Solid joining pillars/Pillars-_017.stl
      • Solid joining pillars/Pillars-_018.stl
      • Solid joining pillars/Pillars-_019.stl
      • Solid joining pillars/Pillars-_020.stl
      • Solid joining pillars/Pillars-_021.stl
    • Walls.zip
      • FDM Walls/A1_1.stl
      • FDM Walls/A1_3.stl
      • FDM Walls/A2_1.stl
      • FDM Walls/A2_2.stl
      • FDM Walls/A3_1.stl
      • FDM Walls/A3_2.stl
      • FDM Walls/A4_1 (2).stl
      • FDM Walls/A4_1.stl
      • FDM Walls/A4_2.stl
      • FDM Walls/B1.stl
      • FDM Walls/B2.stl
      • FDM Walls/B3_1.stl
      • FDM Walls/B3_2.stl
      • Print guide.txt
      • Resin Walls/A1_1.stl
      • Resin Walls/A1_2.stl
      • Resin Walls/A2_1.stl
      • Resin Walls/A2_2.stl
      • Resin Walls/A3_1.stl
      • Resin Walls/A3_2.stl
      • Resin Walls/A4_1.stl
      • Resin Walls/A4_1_dmg.stl
      • Resin Walls/A4_2.stl
      • Resin Walls/B1.stl
      • Resin Walls/B2.stl
      • Resin Walls/B3_1.stl
      • Resin Walls/B3_2.stl
      • Resin Walls/Resin fitting_Read me.txt
      • Resin Walls/Supported for Resin/A1_1.stl
      • Resin Walls/Supported for Resin/A1_2.stl
      • Resin Walls/Supported for Resin/A2_1.stl
      • Resin Walls/Supported for Resin/A2_2.stl
      • Resin Walls/Supported for Resin/A3_1.stl
      • Resin Walls/Supported for Resin/A3_2.stl
      • Resin Walls/Supported for Resin/A4_1.stl
      • Resin Walls/Supported for Resin/A4_1_dmg.stl
      • Resin Walls/Supported for Resin/A4_2.stl
      • Resin Walls/Supported for Resin/B1.stl
      • Resin Walls/Supported for Resin/B2.stl
      • Resin Walls/Supported for Resin/B3_1.stl
      • Resin Walls/Supported for Resin/B3_2.stl
      • Resin Walls/Supported for Resin/Walls supported for resin..lys
      • Resin Walls/Supported for Resin/Walls supported for resin._autosave/Walls supported for resin._2023-02-13_17-59-15.lyt

    Más sobre los formatos

  • Última actualización: 2023-01-25 22:19
  • Fecha de publicación: 2022-11-17 02:35

Licencia

CULTS - Uso privado

Palabras-clave

Página traducida por traducción automática. Ver la versión original.
¿Tienes algún defecto en este diseño? Advertir de una problema.

Makes hechos por la comunidad

Mejores archivos de impresoras 3D en la categoría Juegos

Los más vendidos de la categoría Juegos


Añadir un comentario

18 comentarios


¿Te gustaría apoyar Cults?

¿Te gustan Cults y quieres ayudarnos a continuar la aventura de forma independiente? Tenga en cuenta que somos un equipo pequeño de 3 personas, por lo que es muy sencillo apoyarnos para mantener la actividad y crear futuros desarrollos. Aquí hay 4 soluciones accesibles para todos:

  • PUBLICIDAD: Deshabilite su bloque de anuncios (AdBlock, …) y haga clic en nuestros banners.

  • AFILIACIÓN: Haga sus compras en línea haciendo clic en nuestros enlaces de afiliados aquí Amazon.

  • DONACIÓN: Si lo desea, puede hacer una donación a través de Ko-Fi 💜.

  • PALABRA DE BOCA: Invita a tus amigos a venir, descubre la plataforma y los magníficos archivos 3D compartidos por la comunidad!