Ir al contenido

3D Maze Cube | Laberinto 3D

Descripción del modelo 3D

The objective is to separate both parts

PRINT:
1xA1, 1xA2, 1xL1, 1xL2, 1xP1, 1xP2
1xCross
Place the external faces down in the printer

You will need some super glue for the assembly
Use a piece of sandpaper on the flat edges if the adhesion seems to be poor

Make sure to assemble it with the cross placed in the starting point, just as shown in the ASSEMBLY VIDEO (go to 2:45):
https://www.youtube.com/watch?v=ng9BKqsn71I&t=6s

ENJOY :)

Parámetros de impresión 3D

No supports needed
Place the external faces down in the printer
Minimum 0,8 mm wall thickness for the faces and 1,2 mm for the cross
10-15% Infill is enough
Do not use 100% infill in order to avoid dimensional deviations
(Maximum 2 mm wall thickness for the faces)

  • Formato de modelo 3D : STL

Palabras-clave

Creador

Licencia

CC BY NC

Modelos 3D similares

Los más vendidos de la categoría Juegos


Añadir un comentario