Ir al contenido

Caja FLSUN SR

?
Calidad de creación: 4,4/5 (8 votos)
Evaluación de los miembros: imprimibilidad, utilidad, detalles, etc.

Descripción del modelo 3D

Caisson pour FLSUN SR a fermeture magnétique avec ventilation active.

por favor, lea los avisos antes de iniciar la impresión para no estropear el archivo.

Este cajón puede instalarse tanto si tiene la pantalla TFT70 como si no.

montaje fijo sobre chasis.

Instrucciones de montaje en PDF.

muchas versiones incluidas en los archivos

  • versión imprimible en placas de 30 cm

  • versión que he copiado para aquellos que quieran imprimirla en la SR.

cada versión propone piezas con o sin fijación de extrusión, con o sin puntero y con o sin paso de hilos de la pantalla.

lista de material a comprar en el PDF (alrededor de 40€ + filamento)

Recapitulativo :

12 tornillos M4x16 (+ 2 opcionales para la punta)

12 tuercas en T M4

2 puntas de diámetro 8mm por 10mm máx.

1 tige filetée ou tige aluminium de 8mm

1 llave de acero de 6mm

3 hojas de plexiglás de 1mm

caja compatible con la pantalla BTT70

ATENCIÓN, la versión cortada, que tiene un renforzamiento central prominente en la puerta, puede hacer que se aplique un cambio de filamento hasta los 297mm de altura de impresión.

por eso te animo a imprimir la versión completa

actualización V2:(impactando los archivos porte haut y porte bas)

  • añadir el archivo para los que no tienen pantalla

  • supresión de la inscripción JLB Création interne en "porte bas"

  • Corrección de la tolerancia de archivo en la "puerta baja"

  • Añadir enlaces a los productos

  • arborescencia del archivo más simple

  • añadir archivo punteado

  • ajout instruction en Anglais

actualización de la V3:

  • adición de un archivo guía de montaje fijo (que permite conectar el cable de alimentación)

  • añadir un archivo de montaje fijo guía especial (que permite conectar el cable de alimentación)

  • adición de un soporte de fijación para la pantalla de origen

  • añadir el archivo de la puerta base sin el logotipo

  • actualización de las versiones FR y EN.

actualización de la V4:

  • añadir archivos a la ventilación activa

  • adición de archivos adaptados a los diferentes modelos de perfiles de acero de la SR (ver foto V1 y V2)

  • añadir archivos para facilitar la impresión

actualización V7 :

adición de un termostato para regular la temperatura del cajón.

archivo de enlace del material en el PDF.


Parámetros de impresión 3D

los archivos se han diseñado para evitar los soportes. coloque la cara plana sobre la plataforma.

las tolerancias de embozo son de 0,2mm, si su impresora está bien ajustada no hay problemas de montaje.

parámetros utilizados en la X1 que ha imprimido:

remplazo 25%

velocidad 100mm/s

PLA utilizado: SOVB noir alumine 210°c

Consumo de plástico versión completa : 1600gr

Información sobre el 3D archive

  • Formato de diseño 3D: ZIP Detalles del fichero Cerrar
    • caisson FLSUN SR V7.zip
      • active fan Option/Active fan option EN.pdf
      • active fan Option/Active fan option FR.pdf
      • active fan Option/Cut version (printable on SR)/bride.stl
      • active fan Option/Cut version (printable on SR)/couvercle.stl
      • active fan Option/Cut version (printable on SR)/tuyere.stl
      • active fan Option/Cut version (printable on SR)/lement fixe supperieur ventilation avec extudeur part 1.stl
      • active fan Option/Cut version (printable on SR)/lement fixe supperieur ventilation avec extudeur part 2.stl
      • active fan Option/full version (more interesting)/bride.stl
      • active fan Option/full version (more interesting)/couvercle.stl
      • active fan Option/full version (more interesting)/tuyere.stl
      • active fan Option/full version (more interesting)/lement fixe superieur ventilation avec extrudeur.stl
      • active fan Option/full version (more interesting)/lement fixe superieur ventilation sans extrudeur.stl
      • active fan Option/thermostat file/boitier.stl
      • active fan Option/thermostat file/bride sonde.stl
      • active fan Option/thermostat file/couvercle.stl
      • active fan Option/thermostat file/support regulateur.stl
      • Cut version (printable on SR)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Partie fixe/partie basse fixe cut part 1 X2.stl
      • Cut version (printable on SR)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Partie fixe/partie basse fixe cut part 2 X2.stl
      • Cut version (printable on SR)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Partie fixe/partie haute fixe cut part 1 X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Partie fixe/partie haute fixe cut part 2 X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Partie fixe/partie haute fixe extrudeur cut part 1 X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Partie fixe/partie haute fixe extrudeur cut part 2 special X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Partie fixe/V1/montant fixe guide cable special V1 X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Partie fixe/V1/montant fixe guide cable V1 X3.stl
      • Cut version (printable on SR)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Partie fixe/V1/montant fixe V1 X12.stl
      • Cut version (printable on SR)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Partie fixe/V2/montant fixe guide cable special X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Partie fixe/V2/montant fixe guide cable X3.stl
      • Cut version (printable on SR)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Partie fixe/V2/montant fixe X12.stl
      • Cut version (printable on SR)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Porte/poigne X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Porte/porte bas cut 1 X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Porte/porte bas cut 1sans logo X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Porte/porte bas cut 2 X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Porte/Porte cale X2.stl
      • Cut version (printable on SR)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Porte/Porte centre bas cut 2 X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Porte/Porte centre bas poigne X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Porte/Porte centre haut cut 2 X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Porte/Porte centre haut poigne X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Porte/Porte charniere X2.stl
      • Cut version (printable on SR)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Porte/porte haut cut 1 X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Porte/porte haut cut 2 X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Porte/Porte montant Droit X4.stl
      • Cut version (printable on SR)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Porte/Porte montant gauche X4.stl
      • Cut version (printable on SR)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Partie fixe/partie basse fixe cut part 1 X2.stl
      • Cut version (printable on SR)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Partie fixe/partie basse fixe cut part 2 X2.stl
      • Cut version (printable on SR)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Partie fixe/partie haute fixe cut part 1 X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Partie fixe/partie haute fixe cut part 2 X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Partie fixe/partie haute fixe extrudeur cut part 1 X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Partie fixe/partie haute fixe extrudeur cut part 2 special X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Partie fixe/V1/montant fixe guide cable special V1 X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Partie fixe/V1/montant fixe guide cable V1 X3.stl
      • Cut version (printable on SR)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Partie fixe/V1/montant fixe V1 X12.stl
      • Cut version (printable on SR)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Partie fixe/V2/montant fixe guide cable special X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Partie fixe/V2/montant fixe guide cable X3.stl
      • Cut version (printable on SR)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Partie fixe/V2/montant fixe special X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Porte/porte bas cut 1 X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Porte/porte bas cut 1sans logo X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Porte/porte bas cut 2 X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Porte/Porte cale X2.stl
      • Cut version (printable on SR)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Porte/Porte centre bas cut 1 X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Porte/Porte centre bas cut 2 X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Porte/Porte centre haut cut 1 X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Porte/Porte centre haut cut 2 X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Porte/Porte charniere X2.stl
      • Cut version (printable on SR)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Porte/porte haut cut 1 X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Porte/porte haut cut 2 X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Porte/Porte montant Droit X4.stl
      • Cut version (printable on SR)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Porte/Porte montant gauche X4.stl
      • Cut version (printable on SR)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Partie fixe/partie basse fixe cut part 1 X2.stl
      • Cut version (printable on SR)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Partie fixe/partie basse fixe cut part 2 X2.stl
      • Cut version (printable on SR)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Partie fixe/partie haute fixe cut part 1 X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Partie fixe/partie haute fixe cut part 2 X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Partie fixe/partie haute fixe without extrudeur cut part 1 X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Partie fixe/partie haute fixe without extrudeur cut part 2 special X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Partie fixe/V1/montant fixe guide cable special V1 X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Partie fixe/V1/montant fixe guide cable V1 X3.stl
      • Cut version (printable on SR)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Partie fixe/V1/montant fixe V1 X12.stl
      • Cut version (printable on SR)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Partie fixe/V2/montant fixe guide cable special X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Partie fixe/V2/montant fixe guide cable X3.stl
      • Cut version (printable on SR)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Partie fixe/V2/montant fixe X12.stl
      • Cut version (printable on SR)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Porte/poigne X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Porte/porte bas cut 1 X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Porte/porte bas cut 1sans logo X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Porte/porte bas cut 2 X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Porte/Porte cale X2.stl
      • Cut version (printable on SR)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Porte/Porte centre bas cut 2 X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Porte/Porte centre bas poigne X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Porte/Porte centre haut cut 2 X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Porte/Porte centre haut poigne X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Porte/Porte charniere X2.stl
      • Cut version (printable on SR)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Porte/porte haut cut 1 X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Porte/porte haut cut 2 X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Porte/Porte montant Droit X4.stl
      • Cut version (printable on SR)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Porte/Porte montant gauche X4.stl
      • Cut version (printable on SR)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Partie fixe/partie basse fixe cut part 1 X2.stl
      • Cut version (printable on SR)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Partie fixe/partie basse fixe cut part 2 X2.stl
      • Cut version (printable on SR)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Partie fixe/partie haute fixe cut part 1 X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Partie fixe/partie haute fixe cut part 2 X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Partie fixe/partie haute fixe without extrudeur cut part 1 X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Partie fixe/partie haute fixe without extrudeur cut part 2 special X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Partie fixe/V1/montant fixe guide cable special V1 X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Partie fixe/V1/montant fixe guide cable V1 X3.stl
      • Cut version (printable on SR)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Partie fixe/V1/montant fixe V1 X12.stl
      • Cut version (printable on SR)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Partie fixe/V2/montant fixe guide cable special X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Partie fixe/V2/montant fixe guide cable X3.stl
      • Cut version (printable on SR)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Partie fixe/V2/montant fixe X12.stl
      • Cut version (printable on SR)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Porte/porte bas cut 1 X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Porte/porte bas cut 1sans logo X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Porte/porte bas cut 2 X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Porte/Porte cale X2.stl
      • Cut version (printable on SR)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Porte/Porte centre bas cut 1 X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Porte/Porte centre bas cut 2 X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Porte/Porte centre haut cut 1 X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Porte/Porte centre haut cut 2 X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Porte/Porte charniere X2.stl
      • Cut version (printable on SR)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Porte/porte haut cut 1 X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Porte/porte haut cut 2 X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Porte/Porte montant Droit X4.stl
      • Cut version (printable on SR)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Porte/Porte montant gauche X4.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Partie fixe/partie basse fixe cut part 1 X2.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Partie fixe/partie basse fixe cut part 2 X2.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Partie fixe/partie haute fixe cut part 1 X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Partie fixe/partie haute fixe cut part 2 X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Partie fixe/partie haute fixe extrudeur cut part 1 X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Partie fixe/partie haute fixe extrudeur cut part 2 special X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Partie fixe/V1/montant fixe ecran V1 X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Partie fixe/V1/montant fixe guide cable special V1 X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Partie fixe/V1/montant fixe guide cable V1 X3.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Partie fixe/V1/montant fixe V1 X11.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Partie fixe/V1/support pour ecran origine V1 X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Partie fixe/V2/montant fixe ecran X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Partie fixe/V2/montant fixe guide cable special X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Partie fixe/V2/montant fixe guide cable X3.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Partie fixe/V2/montant fixe X11.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Partie fixe/V2/support ecran X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Porte/poigne X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Porte/porte bas cut 1 X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Porte/porte bas cut 1sans logo X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Porte/porte bas cut 2 X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Porte/Porte cale X2.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Porte/Porte centre bas cut 2 X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Porte/Porte centre bas poigne X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Porte/Porte centre haut cut 2 X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Porte/Porte centre haut poigne X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Porte/Porte charniere X2.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Porte/porte haut cut 1 X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Porte/porte haut cut wo TFT X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Porte/Porte montant Droit X4.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Porte/Porte montant gauche X4.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Partie fixe/partie basse fixe cut part 1 X2.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Partie fixe/partie basse fixe cut part 2 X2.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Partie fixe/partie haute fixe cut part 1 X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Partie fixe/partie haute fixe cut part 2 X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Partie fixe/partie haute fixe extrudeur cut part 1 X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Partie fixe/partie haute fixe extrudeur cut part 2 special X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Partie fixe/V1/montant fixe ecran V1 X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Partie fixe/V1/montant fixe guide cable special V1 X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Partie fixe/V1/montant fixe guide cable V1 X3.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Partie fixe/V1/montant fixe V1 X11.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Partie fixe/V1/support pour ecran origine V1 X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Partie fixe/V2/montant fixe ecran X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Partie fixe/V2/montant fixe guide cable special X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Partie fixe/V2/montant fixe guide cable X3.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Partie fixe/V2/montant fixe X11.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Partie fixe/V2/support ecran X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Porte/porte bas cut 1 X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Porte/porte bas cut 1sans logo X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Porte/porte bas cut 2 X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Porte/Porte cale X2.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Porte/Porte centre bas cut 1 X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Porte/Porte centre bas cut 2 X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Porte/Porte centre haut cut 1 X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Porte/Porte centre haut cut 2 X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Porte/Porte charniere X2.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Porte/porte haut cut 1 X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Porte/porte haut cut wo TFT X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Porte/Porte montant Droit X4.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Porte/Porte montant gauche X4.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Partie fixe/partie basse fixe cut part 1 X2.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Partie fixe/partie basse fixe cut part 2 X2.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Partie fixe/partie haute fixe cut part 1 X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Partie fixe/partie haute fixe cut part 2 X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Partie fixe/partie haute fixe without extrudeur cut part 1 X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Partie fixe/partie haute fixe without extrudeur cut part 2 special X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Partie fixe/V1/montant fixe ecran V1 X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Partie fixe/V1/montant fixe guide cable special V1 X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Partie fixe/V1/montant fixe guide cable V1 X3.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Partie fixe/V1/montant fixe V1 X11.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Partie fixe/V1/support pour ecran origine V1 X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Partie fixe/V2/montant fixe ecran X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Partie fixe/V2/montant fixe guide cable special X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Partie fixe/V2/montant fixe guide cable X3.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Partie fixe/V2/montant fixe X11.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Partie fixe/V2/support ecran X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Porte/poigne X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Porte/porte bas cut 1 X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Porte/porte bas cut 1sans logo X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Porte/porte bas cut 2 X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Porte/Porte cale X2.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Porte/Porte centre bas cut 2 X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Porte/Porte centre bas poigne X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Porte/Porte centre haut cut 2 X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Porte/Porte centre haut poigne X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Porte/Porte charniere X2.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Porte/porte haut cut 1 X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Porte/porte haut cut wo TFT X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Porte/Porte montant Droit X4.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Porte/Porte montant gauche X4.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Partie fixe/partie basse fixe cut part 1 X2.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Partie fixe/partie basse fixe cut part 2 X2.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Partie fixe/partie haute fixe cut part 1 X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Partie fixe/partie haute fixe cut part 2 X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Partie fixe/partie haute fixe without extrudeur cut part 1 X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Partie fixe/partie haute fixe without extrudeur cut part 2 special X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Partie fixe/V1/montant fixe ecran V1 X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Partie fixe/V1/montant fixe guide cable special V1 X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Partie fixe/V1/montant fixe guide cable V1 X3.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Partie fixe/V1/montant fixe V1 X11.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Partie fixe/V1/support pour ecran origine V1 X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Partie fixe/V2/montant fixe ecran X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Partie fixe/V2/montant fixe guide cable special X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Partie fixe/V2/montant fixe guide cable X3.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Partie fixe/V2/montant fixe X11.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Partie fixe/V2/support ecran X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Porte/porte bas cut 1 X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Porte/porte bas cut 1sans logo X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Porte/porte bas cut 2 X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Porte/Porte cale X2.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Porte/Porte centre bas cut 1 X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Porte/Porte centre bas cut 2 X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Porte/Porte centre haut cut 1 X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Porte/Porte centre haut cut 2 X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Porte/Porte charniere X2.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Porte/porte haut cut 1 X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Porte/porte haut cut wo TFT X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Porte/Porte montant Droit X4.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Porte/Porte montant gauche X4.stl
      • difficults d'impression (fail print)/Difficulty printing pillar.pdf
      • difficults d'impression (fail print)/difficult a imprimer les montants.pdf
      • difficults d'impression (fail print)/partie fixe/V1/demi bas montant fixe guide cable special V1.stl
      • difficults d'impression (fail print)/partie fixe/V1/demi bas montant fixe guide cable V1.stl
      • difficults d'impression (fail print)/partie fixe/V1/demi haut montant fixe guide cable special V1.stl
      • difficults d'impression (fail print)/partie fixe/V1/demi haut montant fixe guide cable V1.stl
      • difficults d'impression (fail print)/partie fixe/V1/demi montant fixe ecran V1.stl
      • difficults d'impression (fail print)/partie fixe/V1/demi montant fixe V1.stl
      • difficults d'impression (fail print)/partie fixe/V2/avec jeu augment (more loose)/montant fixe avec jeu.stl
      • difficults d'impression (fail print)/partie fixe/V2/avec jeu augment (more loose)/montant fixe guide cable avec jeu.stl
      • difficults d'impression (fail print)/partie fixe/V2/avec jeu augment (more loose)/montant fixe guide cable special avec jeu.stl
      • difficults d'impression (fail print)/partie fixe/V2/demi bas montant fixe guide cable special V2.stl
      • difficults d'impression (fail print)/partie fixe/V2/demi bas montant fixe guide cable V2.stl
      • difficults d'impression (fail print)/partie fixe/V2/demi haut montant fixe guide cable special V2.stl
      • difficults d'impression (fail print)/partie fixe/V2/demi haut montant fixe guide cable V2.stl
      • difficults d'impression (fail print)/partie fixe/V2/demi montant fixe ecran V2.stl
      • difficults d'impression (fail print)/partie fixe/V2/demi montant fixe V2.stl
      • difficults d'impression (fail print)/porte/demi montant droit X8.stl
      • difficults d'impression (fail print)/porte/demi montant gauche X8.stl
      • full version (more interesting)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Partie fixe/partie basse fixe X2.stl
      • full version (more interesting)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Partie fixe/partie haute fixe extrudeur special X1.stl
      • full version (more interesting)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Partie fixe/partie haute fixe X1.stl
      • full version (more interesting)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Partie fixe/V1/montant fixe guide cable special V1 X1.stl
      • full version (more interesting)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Partie fixe/V1/montant fixe guide cable V1 X3.stl
      • full version (more interesting)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Partie fixe/V1/montant fixe V1 X12.stl
      • full version (more interesting)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Partie fixe/V2/montant fixe guide cable special X1.stl
      • full version (more interesting)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Partie fixe/V2/montant fixe guide cable X3.stl
      • full version (more interesting)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Partie fixe/V2/montant fixe X12.stl
      • full version (more interesting)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Porte/centre bas poigne X1.stl
      • full version (more interesting)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Porte/centre haut poigne X1.stl
      • full version (more interesting)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Porte/poigne X1.stl
      • full version (more interesting)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Porte/porte bas logo X1.stl
      • full version (more interesting)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Porte/porte bas sans logo X1.stl
      • full version (more interesting)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Porte/Porte cale X2.stl
      • full version (more interesting)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Porte/Porte charniere X2.stl
      • full version (more interesting)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Porte/porte haut w TFT70 X1.stl
      • full version (more interesting)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Porte/Porte montant Droit X4.stl
      • full version (more interesting)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Porte/Porte montant gauche X4.stl
      • full version (more interesting)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Partie fixe/partie basse fixe X2.stl
      • full version (more interesting)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Partie fixe/partie haute fixe extrudeur special X1.stl
      • full version (more interesting)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Partie fixe/partie haute fixe X1.stl
      • full version (more interesting)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Partie fixe/V1/montant fixe guide cable special V1 X1.stl
      • full version (more interesting)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Partie fixe/V1/montant fixe guide cable V1 X3.stl
      • full version (more interesting)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Partie fixe/V1/montant fixe V1 X12.stl
      • full version (more interesting)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Partie fixe/V2/montant fixe guide cable special X1.stl
      • full version (more interesting)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Partie fixe/V2/montant fixe guide cable X3.stl
      • full version (more interesting)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Partie fixe/V2/montant fixe X12.stl
      • full version (more interesting)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Porte/centre bas X1.stl
      • full version (more interesting)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Porte/centre haut X1.stl
      • full version (more interesting)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Porte/porte bas logo X1.stl
      • full version (more interesting)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Porte/porte bas sans logo X1.stl
      • full version (more interesting)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Porte/Porte cale X2.stl
      • full version (more interesting)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Porte/Porte charniere X2.stl
      • full version (more interesting)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Porte/porte haut w TFT70 X1.stl
      • full version (more interesting)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Porte/Porte montant Droit X4.stl
      • full version (more interesting)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Porte/Porte montant gauche X4.stl
      • full version (more interesting)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Partie fixe/partie basse fixe X2.stl
      • full version (more interesting)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Partie fixe/partie haute fixe ss extrudeur special X1.stl
      • full version (more interesting)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Partie fixe/partie haute fixe X1.stl
      • full version (more interesting)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Partie fixe/V1/montant fixe guide cable special V1 X1.stl
      • full version (more interesting)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Partie fixe/V1/montant fixe guide cable V1 X3.stl
      • full version (more interesting)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Partie fixe/V1/montant fixe V1 X12.stl
      • full version (more interesting)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Partie fixe/V2/montant fixe guide cable special X1.stl
      • full version (more interesting)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Partie fixe/V2/montant fixe guide cable X3.stl
      • full version (more interesting)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Partie fixe/V2/montant fixe X12.stl
      • full version (more interesting)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Porte/centre bas poigne X1.stl
      • full version (more interesting)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Porte/centre haut poigne X1.stl
      • full version (more interesting)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Porte/poigne X1.stl
      • full version (more interesting)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Porte/porte bas logo X1.stl
      • full version (more interesting)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Porte/porte bas sans logo X1.stl
      • full version (more interesting)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Porte/Porte cale X2.stl
      • full version (more interesting)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Porte/Porte charniere X2.stl
      • full version (more interesting)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Porte/porte haut w TFT70 X1.stl
      • full version (more interesting)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Porte/Porte montant Droit X4.stl
      • full version (more interesting)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Porte/Porte montant gauche X4.stl
      • full version (more interesting)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Partie fixe/partie basse fixe X2.stl
      • full version (more interesting)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Partie fixe/partie haute fixe ss extrudeur special X1.stl
      • full version (more interesting)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Partie fixe/partie haute fixe X1.stl
      • full version (more interesting)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Partie fixe/V1/montant fixe guide cable special V1 X1.stl
      • full version (more interesting)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Partie fixe/V1/montant fixe guide cable V1 X3.stl
      • full version (more interesting)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Partie fixe/V1/montant fixe V1 X12.stl
      • full version (more interesting)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Partie fixe/V2/montant fixe guide cable special X1.stl
      • full version (more interesting)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Partie fixe/V2/montant fixe guide cable X3.stl
      • full version (more interesting)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Partie fixe/V2/montant fixe X12.stl
      • full version (more interesting)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Porte/centre bas X1.stl
      • full version (more interesting)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Porte/centre haut X1.stl
      • full version (more interesting)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Porte/porte bas logo X1.stl
      • full version (more interesting)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Porte/porte bas sans logo X1.stl
      • full version (more interesting)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Porte/Porte cale X2.stl
      • full version (more interesting)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Porte/Porte charniere X2.stl
      • full version (more interesting)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Porte/porte haut w TFT70 X1.stl
      • full version (more interesting)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Porte/Porte montant Droit X4.stl
      • full version (more interesting)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Porte/Porte montant gauche X4.stl
      • full version (more interesting)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Partie fixe/partie basse fixe X2.stl
      • full version (more interesting)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Partie fixe/partie haute fixe extrudeur special X1.stl
      • full version (more interesting)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Partie fixe/partie haute fixe X1.stl
      • full version (more interesting)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Partie fixe/V1/montant fixe ecran V1 X1.stl
      • full version (more interesting)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Partie fixe/V1/montant fixe guide cable special V1 X1.stl
      • full version (more interesting)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Partie fixe/V1/montant fixe guide cable V1 X3.stl
      • full version (more interesting)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Partie fixe/V1/montant fixe V1 X11.stl
      • full version (more interesting)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Partie fixe/V1/support pour ecran origine V1 X1.stl
      • full version (more interesting)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Partie fixe/V2/montant fixe ecran X1.stl
      • full version (more interesting)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Partie fixe/V2/montant fixe guide cable special X1.stl
      • full version (more interesting)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Partie fixe/V2/montant fixe guide cable X3.stl
      • full version (more interesting)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Partie fixe/V2/montant fixe X11.stl
      • full version (more interesting)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Partie fixe/V2/support ecran X1.stl
      • full version (more interesting)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Porte/centre bas poigne X1.stl
      • full version (more interesting)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Porte/centre haut poigne X1.stl
      • full version (more interesting)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Porte/poigne X1.stl
      • full version (more interesting)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Porte/porte bas logo X1.stl
      • full version (more interesting)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Porte/porte bas sans logo X1.stl
      • full version (more interesting)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Porte/Porte cale X2.stl
      • full version (more interesting)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Porte/Porte charniere X2.stl
      • full version (more interesting)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Porte/porte haut without TFT70 X1.stl
      • full version (more interesting)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Porte/Porte montant Droit X4.stl
      • full version (more interesting)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Porte/Porte montant gauche X4.stl
      • full version (more interesting)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Partie fixe/partie basse fixe X2.stl
      • full version (more interesting)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Partie fixe/partie haute fixe extrudeur special X1.stl
      • full version (more interesting)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Partie fixe/partie haute fixe X1.stl
      • full version (more interesting)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Partie fixe/V1/montant fixe ecran V1 X1.stl
      • full version (more interesting)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Partie fixe/V1/montant fixe guide cable special V1 X1.stl
      • full version (more interesting)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Partie fixe/V1/montant fixe guide cable V1 X3.stl
      • full version (more interesting)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Partie fixe/V1/montant fixe V1 X11.stl
      • full version (more interesting)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Partie fixe/V1/support pour ecran origine V1 X1.stl
      • full version (more interesting)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Partie fixe/V2/montant fixe ecran X1.stl
      • full version (more interesting)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Partie fixe/V2/montant fixe guide cable special X1.stl
      • full version (more interesting)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Partie fixe/V2/montant fixe guide cable X3.stl
      • full version (more interesting)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Partie fixe/V2/montant fixe X11.stl
      • full version (more interesting)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Partie fixe/V2/support ecran X1.stl
      • full version (more interesting)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Porte/centre bas X1.stl
      • full version (more interesting)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Porte/centre haut X1.stl
      • full version (more interesting)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Porte/porte bas logo X1.stl
      • full version (more interesting)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Porte/porte bas sans logo X1.stl
      • full version (more interesting)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Porte/Porte cale X2.stl
      • full version (more interesting)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Porte/Porte charniere X2.stl
      • full version (more interesting)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Porte/porte haut without TFT70 X1.stl
      • full version (more interesting)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Porte/Porte montant Droit X4.stl
      • full version (more interesting)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Porte/Porte montant gauche X4.stl
      • full version (more interesting)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Partie fixe/partie basse fixe X2.stl
      • full version (more interesting)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Partie fixe/partie haute fixe ss extrudeur special X1.stl
      • full version (more interesting)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Partie fixe/partie haute fixe X1.stl
      • full version (more interesting)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Partie fixe/V1/montant fixe ecran V1 X1.stl
      • full version (more interesting)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Partie fixe/V1/montant fixe guide cable special V1 X1.stl
      • full version (more interesting)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Partie fixe/V1/montant fixe guide cable V1 X3.stl
      • full version (more interesting)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Partie fixe/V1/montant fixe V1 X11.stl
      • full version (more interesting)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Partie fixe/V1/support pour ecran origine V1 X1.stl
      • full version (more interesting)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Partie fixe/V2/montant fixe ecran X1.stl
      • full version (more interesting)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Partie fixe/V2/montant fixe guide cable special X1.stl
      • full version (more interesting)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Partie fixe/V2/montant fixe guide cable X3.stl
      • full version (more interesting)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Partie fixe/V2/montant fixe X11.stl
      • full version (more interesting)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Partie fixe/V2/support ecran X1.stl
      • full version (more interesting)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Porte/centre bas poigne X1.stl
      • full version (more interesting)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Porte/centre haut poigne X1.stl
      • full version (more interesting)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Porte/poigne X1.stl
      • full version (more interesting)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Porte/porte bas logo X1.stl
      • full version (more interesting)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Porte/porte bas sans logo X1.stl
      • full version (more interesting)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Porte/Porte cale X2.stl
      • full version (more interesting)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Porte/Porte charniere X2.stl
      • full version (more interesting)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Porte/porte haut w TFT70 X1.stl
      • full version (more interesting)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Porte/Porte montant Droit X4.stl
      • full version (more interesting)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Porte/Porte montant gauche X4.stl
      • full version (more interesting)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Partie fixe/partie basse fixe X2.stl
      • full version (more interesting)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Partie fixe/partie haute fixe ss extrudeur special X1.stl
      • full version (more interesting)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Partie fixe/partie haute fixe X1.stl
      • full version (more interesting)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Partie fixe/V1/montant fixe ecran V1 X1.stl
      • full version (more interesting)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Partie fixe/V1/montant fixe guide cable special V1 X1.stl
      • full version (more interesting)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Partie fixe/V1/montant fixe guide cable V1 X3.stl
      • full version (more interesting)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Partie fixe/V1/montant fixe V1 X11.stl
      • full version (more interesting)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Partie fixe/V1/support pour ecran origine V1 X1.stl
      • full version (more interesting)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Partie fixe/V2/montant fixe ecran X1.stl
      • full version (more interesting)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Partie fixe/V2/montant fixe guide cable special X1.stl
      • full version (more interesting)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Partie fixe/V2/montant fixe guide cable X3.stl
      • full version (more interesting)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Partie fixe/V2/montant fixe X11.stl
      • full version (more interesting)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Partie fixe/V2/support ecran X1.stl
      • full version (more interesting)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Porte/centre bas X1.stl
      • full version (more interesting)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Porte/centre haut X1.stl
      • full version (more interesting)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Porte/porte bas logo X1.stl
      • full version (more interesting)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Porte/porte bas sans logo X1.stl
      • full version (more interesting)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Porte/Porte cale X2.stl
      • full version (more interesting)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Porte/Porte charniere X2.stl
      • full version (more interesting)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Porte/porte haut w TFT70 X1.stl
      • full version (more interesting)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Porte/Porte montant Droit X4.stl
      • full version (more interesting)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Porte/Porte montant gauche X4.stl
      • general instruction EN.pdf
      • instruction EN.pdf
      • instruction gnrales FR.pdf
      • instructions FR.pdf

    Más sobre los formatos

  • Última actualización: 2022-04-01 17:10
  • Fecha de publicación: 2022-02-07 18:55

Copyright

©

Palabras-clave

Creador

Página traducida por traducción automática. Ver la versión original.
¿Tienes algún defecto en este diseño? Advertir de una problema

Mejores archivos de impresoras 3D en la categoría Herramientas

Los más vendidos de la categoría Herramientas


Añadir un comentario


¿Te gustaría apoyar Cults?

¿Te gustan Cults y quieres ayudarnos a continuar la aventura de forma independiente? Tenga en cuenta que somos un equipo pequeño de 3 personas, por lo que es muy sencillo apoyarnos para mantener la actividad y crear futuros desarrollos. Aquí hay 4 soluciones accesibles para todos:

  • PUBLICIDAD: Deshabilite su bloque de anuncios AdBlock y haga clic en nuestros banners.

  • AFILIACIÓN: Haga sus compras en línea haciendo clic en nuestros enlaces de afiliados aquí Amazon.

  • DONACIÓN: Si lo desea, puede hacer una donación a través de PayPal.

  • PALABRA DE BOCA: Invita a tus amigos a venir, descubre la plataforma y los magníficos archivos 3D compartidos por la comunidad!