Ir al contenido

Actualización de la cubierta de la consola Ender 5 con cajones

?
Calidad de creación: 4,9/5 (4 votos)
Evaluación de los miembros: imprimibilidad, utilidad, detalles, etc.
  • 👁 7,7k vista
  • 17 me gusta
  • 143 descargas

Descripción del modelo 3D

Esta es una versión actualizada de la cubierta de mi consola con cajones de almacenamiento que he añadido un pequeño 3er cajón en el lado que incluye un inserto de cajón portaboquillas también. Tiene mis cajones de nuevo diseño que tienen clips para que encajen en la cubierta y funcionen como tope del cajón, pero se pueden flexionar para sacar fácilmente el cajón sin necesidad de tornillos o herramientas. También he rediseñado la cubierta lateral para que se fije con imanes en lugar de tornillos, lo cual es una gran mejora, especialmente si necesitabas un acceso frecuente a tu tarjeta Pi SD, tenías que quitar los tornillos para quitar la cubierta, ahora sólo se encaja y se quita y funciona muy bien.


Parámetros de impresión 3D

Utilice estos ajustes

.2 Altura de la capa

.8 Muro

.8 Capas superiores/inferiores

Información sobre el 3D archive

  • Formato de diseño 3D: PDF, STL, y TXT Detalles del fichero Cerrar
    • 2pc_Cover Bottom.STL
    • Case Assembly.pdf
    • Common Drawer Specifications.pdf
    • Drawer Knob.STL
    • Drawer Stop.STL
    • Long Drawer.STL
    • Nozzel Holder Drawer Insert.STL
    • Nozzle Drawer Knob.STL
    • Nozzle Drawer.STL
    • Pi-3B+_Board Riser Post.STL
    • Pi-3B+_Case.STL
    • Pi-4_Case.STL
    • Pi-4_Riser Post.STL
    • Purchased Item Links.txt
    • Side Cover.STL
    • Small Drawer.STL

    Más sobre los formatos

  • Última actualización: 2020/12/05 15:40
  • Fecha de publicación: 2020/09/09 22:13

Copyright

©

Palabras-clave

Creador

Página traducida por traducción automática. Ver la versión original.
¿Tienes algún defecto en este diseño? Advertir de una problema

Los más vendidos de la categoría Herramientas


Añadir un comentario

5 comentarios

Hi, I'm interested in buying this design, but my only hesitation is that there does not seem to be an easy way to access the GPOI pins on the pi without removing the entire side. Would it be possible to add a cut out on the back (or some other means of access) for the pins?

It looks like I can get an opening for the GPIO pins and I have a slot already in the case I have modeled and it looks like it should work. I have some screen shot images I can show you. Use the below link to access the images. The link will be good for 4 days so if this looks like it would work for me let me know if you purchase and I will send you another link to download the modified case, just let me know which PI version you will be using, the images are for the PI 4.

https://1drv.ms/u/s!Am7fP5RVaiTDgb19bZMI8gn8HHsdBA?e=rnHGCq

That looks perfect! I just went ahead and purchased this design. My current plan is to use a rpi 3b+ but may end up going with a 4 depending on performance. Would it be possible to get both versions? Also, I noticed in the purchased items file, the link to the magnets no longer works. Can you please provide a new link?

I have both the PI-3 and PI-4 cases with the GPIO cut-out uploaded to the same folder I put the images in. The same link will work but below is another copy of it if you need it. That folder will be accessible until Wednesday. Please let me know if you have any issues downloading. Also for the magnets they are 3mm Diameter x 2mm Thick and below is another link I found on Amazon that should work.

Thank you for purchasing and I hope you enjoy it, I really like it on my printer and have found it very useful and I hope you do as well.

Folder Link
https://1drv.ms/u/s!Am7fP5RVaiTDgb19bZMI8gn8HHsdBA?e=rnHGCq

Amazon Magnets Link
https://www.amazon.com/Multi-Use-Refrigerators-Magnets-Whiteboard-Bulletin/dp/B07MBVVQJL/ref=sr_1_8?crid=15EY1Y493E8E8&dchild=1&keywords=3mm+x+2mm+magnets&qid=1630879446&sprefix=3mm+x+2mm%2Caps%2C173&sr=8-8

Thank you so much! My printer comes in later this week and I look forward to printing and adding this upgrade.

Hi, I'm finally getting around to printing this and when I re-downloaded the zip I accidentally deleted the versions of the pi cases with the GPIO cut out. Can you please resend those to me? Also, do you have any recommendations with regards to print orientations and use of support?

Looks like I was able to recover the files so no worries there. I would still love to hear any printing recommendations you have for all the various parts though

Hi! I'm also interested in this GPIO cut for the PI-3. Could you send me this model too? Just purchased.

Thank you!!

What magnets were used the link is an old listing not viewable?

The download should have had a text file (Purchased Items.txt) with the links to all the purchased items I used. In case you didn't get this here is a list as well. I hope this helps if not let me know and I will help you all I can. Thank you for purchasing and helping support my future projects.

Amazon Screw Kits
https://www.amazon.com/gp/product/B07S337WBB/ref=ppx_yo_dt_b_asin_title_o01_s01?ie=UTF8&psc=1
https://www.amazon.com/gp/product/B07BTNDC6W/ref=ppx_yo_dt_b_asin_title_o09_s01?ie=UTF8&psc=1

Amazon Metric Tee Kit
https://www.amazon.com/gp/product/B07P2C81MP/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1

Amazon Raspberry Pi Cooling Fans
https://www.amazon.com/gp/product/B071H8RCFH/ref=ppx_yo_dt_b_asin_title_o05_s00?ie=UTF8&psc=1

Amazon USB Cables
https://www.amazon.com/gp/product/B07CF7243G/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1

Amazon 3 OD x 2 Magnets
https://www.amazon.com/gp/product/B0819JZF66/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1

What all screws are needed for the box?


¿Te gustaría apoyar Cults?

¿Te gustan Cults y quieres ayudarnos a continuar la aventura de forma independiente? Tenga en cuenta que somos un equipo pequeño de 3 personas, por lo que es muy sencillo apoyarnos para mantener la actividad y crear futuros desarrollos. Aquí hay 4 soluciones accesibles para todos:

  • PUBLICIDAD: Deshabilite su bloque de anuncios AdBlock y haga clic en nuestros banners.

  • AFILIACIÓN: Haga sus compras en línea haciendo clic en nuestros enlaces de afiliados aquí Amazon o Aliexpress.

  • DONACIÓN: Si lo desea, puede hacer una donación a través de PayPal aquí.

  • PALABRA DE BOCA: Invita a tus amigos a venir, descubre la plataforma y los magníficos archivos 3D compartidos por la comunidad!