Ir al contenido

Dispensador de jabón de manos espumoso de Disney Mickey Mouse | Bath and Body Works

Descargar archivos STL Dispensador de jabón de manos espumoso de Disney Mickey Mouse | Bath and Body Works, benxfactorDescargar archivos STL Dispensador de jabón de manos espumoso de Disney Mickey Mouse | Bath and Body Works, benxfactorDescargar archivos STL Dispensador de jabón de manos espumoso de Disney Mickey Mouse | Bath and Body Works, benxfactorDescargar archivos STL Dispensador de jabón de manos espumoso de Disney Mickey Mouse | Bath and Body Works, benxfactorDescargar archivos STL Dispensador de jabón de manos espumoso de Disney Mickey Mouse | Bath and Body Works, benxfactorDescargar archivos STL Dispensador de jabón de manos espumoso de Disney Mickey Mouse | Bath and Body Works, benxfactorDescargar archivos STL Dispensador de jabón de manos espumoso de Disney Mickey Mouse | Bath and Body Works, benxfactor

¿Usted imprimió 3D este modelo?

Descripción del modelo 3D

**Si no tienes una impresora y te gustaría tener tu propia tienda Etsy...

https://www.etsy.com/listing/812897854/disney-soap-pump-3d-printed-disney-japan **

Este es un derivado del dispensador de jabón que se vende en Disney Japón y el modelo 3D de Imalittlesomthing (manija de instagram, mírenlos) que se conecta a cualquiera de las nuevas bombas de mano de espuma de Bath and Body Works que se conectan a las bombas más antiguas, pero es un ajuste más suelto.

Esta impresión consta de 2 archivos para imprimir uno es el cuerpo de la bomba y el otro es la parte superior que puedes usar para personalizar tu impresión. Recomiendo imprimir el cuerpo en PETG, ya que puede ser un poco más difícil con él, ya que es más flexible.

El topper puede ser cualquier termoplástico que quieras, sólo asegúralo con un poco de superpegamento. Si imprimes el cuerpo en una cama lisa, es posible que tengas que lijar y limpiar la zona antes de aplicar el topper. He incluido un archivo .3mf que tiene los refuerzos de soporte pre-aplicados si usas Prusa Slicer.

Por favor, publique algunas de sus huellas si puede! :)

Parámetros de impresión 3D

Utilicé 0,15 capas y 100% de relleno para que las piezas más pequeñas fueran resistentes. 2 capas parecen funcionar bien.

  • Formato de archivo 3D : 3MF y STL

Palabras-clave

Creador

Copyright

©

Página traducida por traducción automática. Ver la versión original.


Los más vendidos de la categoría Casa


Añadir un comentario

20 comentarios

Was anyone else able to print this without supports? Seems impossible, right?

Whenever I use it it makes the Mickey head but it also starts coming out the back. Any ideas to fix?

I use needle nose plyers and a small screw driver is what I use

I printed it with the supports with Prusa, how do you get them out?

to show the supports you have to turn on the "only support enforcers" option on prusa slicer

The .3M file shows how I have the supports layed out and I use a tool like some needle nose plyers to pull out my support.

Maybe you can post a file that has the supports for slicing in cura?

Tried to print the model with the supports already on the print, but they don’t come off. It’s like they are added to be part of the print and not supports. Any thoughts?

Is there anyway I can the file for prusa but without the Disney “D” logo on it. Please.

Thank you for your help! I was able to print this. I have yet to test it since I don’t have any bath and body soap around. If you make a Method soap file or modification I’d gladly buy it right away.

If you're using prusa slicer all you have to do if select the support enforcers on the drop down and slice and the enforcers I added will be in the print

Hello! So I downloaded the file and can not locate the 3m file to show how to make the supports. How can I add the supports in pursa slicer. Thanks

So through out my testing the foaming action always seemed to foam better if there's more volume for the foam to expand but I can add a bit more on the inside and post it

I was wondering if there is a way to fill it inside to get a way to get the foam directly to the mickey shape as you have to pump up to 2-3 times and when the soap is not foamy it leaves a lot of soap leaking from the top.

I'm glad I have not tried it without the supports in the interior I will try to do that myself soon. Sadly I do not have any plans to release the model files. What modifications would you suggest? The size is as snug as the bottles will allow as the end that goes into the bottle can snap off if it's forced on with too much pressure.

It worked without the internal supports, I was worried about the top coming down without any support but it printed out pretty well. My only concern now is that the inside is huge and I have some leak between the nozzle and the adapter. Wondering if you have the 3D file to help you make some enhancements. The print looks great and my daughters love it!

Thanks!

Yes the internal supports need removed I did mine with some needle nose pliers you could potentially just use a small screwdriver mine came out fairly easy

hi Benxfactor!

so i finished my print, besides the curvy thingy on the sides that needs to be removed. does the internal supports needs to be removed also?

Hey so the nozzle only need supports under the nozzle I would put support blockers inside the nozzle itself. The 3mf file I have supplied will show you where I put supports to print my version of the file. If you download prusa slicer this is the easiest way to the the support enforcers. Let me know if you have any more questions 😊

I have downloaded and Printed this model and everything looks good until I attach the soap dispenser, for some reason the hole that connects to the soap dispenser is completely closed, do you know what setup do I need to do to allow the soap to go through it? it took me to print this 4 hours with a Chiron by Anycubic @ .25mm. Please let me know if I'm missing any step or change in the settings. Thank you! Great job!


¿Te gustaría apoyar Cults?

¿Te gustan Cults y quieres ayudarnos a continuar la aventura de forma independiente? Tenga en cuenta que somos un equipo pequeño de 3 personas, por lo que es muy sencillo apoyarnos para mantener la actividad y crear futuros desarrollos. Aquí hay 4 soluciones accesibles para todos:

  • PUBLICIDAD: Deshabilite su bloque de anuncios AdBlock y haga clic en nuestros banners.

  • AFILIACIÓN: Haga sus compras en línea haciendo clic en nuestros enlaces de afiliados aquí Amazon, Gearbest, Banggood, Aliexpress o Ebay.

  • DONACIÓN: Si lo desea, puede hacer una donación a través de PayPal aquí.

  • PALABRA DE BOCA: Invita a tus amigos a venir, descubre la plataforma y los magníficos archivos 3D compartidos por la comunidad!