Actually I had your idea in consideration when designing it but it ended up in the middle as it is now ^_^
When I put it horizontally at the bottom, it will be lifted when we put the keyring/o-ring on it. The stand will work, but not so elegant on the tabletop. When I put it vertically at the side, the loop is by layers and it won't be strong enough unless you make the loop bigger and thicker, which is contrary to what I wanted -- as small as possible so that I cannot feel it in my pocket :D

I have one thinner and smaller which is designed specifically for Xperia XZ1 with one angle. I do not post it here on Cults3D because it is not for universal use, only several users have this type of phone ^_^

I think it would be better if the hole where the ring of the keys is supposed to come, if you place it at the border of the side and not in the middle. Now it is not very easy to print. ;)
Thanks for your sharing anyway !!

You are welcome.
When you have it in your hand, you will see that rotating it will give you another extra angles ;)
And also it can be a fidget :D

I don't understand why you need it to have rotating parts... I've made it all solid to try my hypothesis :P

Thanks for sharing!! I'm printing this right now :D