Ir al contenido

UFO - sliced model easy to print

Descripción del modelo 3D

This is a nice UFO model inspired by the S.H.A.D.O. series (I love!): you can print it in all the scales you like. You just have to print the single slice 9 times to create the complete disc.
The file "UFO.stl" has 6 support blades you can easily remove after printing, you don't need automatic supports or else. If you have a DELTA 20 cm base diam. you could print the model 4 times bigger, obtaining the model you see in the pictures (55 cm diam).

After that, you can print the rest: the alien pilot is my own creation made with Sculptrix free modeling software.
This model as been created to decore the ITALYmaker Lab in Milan, hanging it from the floor with an invisible nylon wire.

Parámetros de impresión 3D

The file "UFO cab" is upside down because it was like that in the CAD software, please turn it right! You also have a small cone, that will be able to cover the little distances you could have matching the slices in the center of the rotor.



ITALYmaker born in 2013 from a free blog online, creating the first 3D printing Open Source Laboratory in Milan, Italy. The target is the creation of a Lab partner network in Italy, based on Open Source technologies and sharing economy, to diffuse and increase the Italian products, both machines FDM and filaments, to share coworking and productions and develop our online community.
More information on:




Creaciones similares

Añadir un comentario