Ir al contenido

Linterna gótica

?
Calidad de make: 5,0/5 (1 voto)
Evaluación de los miembros sobre la calidad de la impresión 3D, post-procesamiento, foto, etc.
  • 9 me gusta
Maker
Modelo 3D

Descripción del Make

https://youtu.be/0QgvK-FgV2k

An Adafruit Circuit Playground is mounted to a separate enclosure that is secured to the bottom of the lantern base. The Circuit Playground board is secured to the enclosure using 4x M3 (5mm) machine screws. The circuit playground enclosure is mounted to the bottom of the base using 4x #10-36 (1in long) machine screws. A rechargeable 500mAh lithium polymer battery is fitted in between the circuit playground board and the enclosure. A slide switch and JST adapter allows you to turn the circuit on and off.

Adafruit Circuit Playground Classic
https://www.adafruit.com/product/3000

Notes:
0.6mm nozzle allows for faster print time. Sliced using Simplify3D.

BCN3D Sigma R17
Black / Natural PLA
20hrs 30min total print time
X:160 Y:139 Z:178mm
.5mm layer / .6mm nozzle
30% Infill / 3mm retract
235C / 40C
660G
60mm/s

Impresora 3D

BCN3D Sigma
  • Raft: No
  • Resolución: 0,5 mm
  • Temperatura: 235 ℃
  • Soporte: No
  • Relleno: 30 %
  • Velocidad: 60 mm/s

Otras makes del mismo modelo 3D


Añadir un comentario