Ir al contenido

Articulated Tarantula

Calidad de make: 5,0/5 (1 voto)
Evaluación de los miembros sobre la calidad de la impresión 3D, post-procesamiento, foto, etc.
Modelo 3D

Descripción del Make

Printed with a Mars 2 Pro Resin printer on 80% scaling (C Model) with ChituBox

Exposure Settings i used:
Bottom Exposure: 30s
Exposure: 2s

Temperature was at the time of the print at around 22-24 C

After i washed it i removed the bulk of the excess material let it dry with a fan and put it in the UV Station with 30s intervals and moved it around till i got 3 minutes in total.
It did take quite a while removing the excess Material off of the Print with a wire cutter and a sharp knife also good lighting and patience is key!

Impresora 3D

Mars 2 Pro
  • Resolución: 0,05 mm
  • Temperatura: 100 ℃
  • Relleno: 100 %
  • Velocidad: 60 mm/s
¿Tiene algún problema con este Make? Advertir de una problema.

Otras makes del mismo modelo 3D

Añadir un comentario