Ir al contenido

Steam Punk Cabinet Latch

Descripción del modelo 3D

This is a fully functioning spring loaded cabinet latch appropriate for standard kitchen cabinet size doors and smaller. I used it on a BBQ cabinet along with the Steam Punk Hinge also on this site. For a finish I mixed acetone with copper powder and painted it on with a small brush. Once dry high gloss polishing with a brass dremel brush or softer tools is possible.

Parámetros de impresión 3D

Printed IN ABS at .3 mm resolution. Finish coated with acetone mixed with copper powder and then polished with dremel tools. Uses #6 screws to fasten or if scaled to 80% it will use #6 screws. Anticipate it will change color and go green with humidity which is the desired effect





Creaciones similares

Añadir un comentario