Ir al contenido

Replacement Drawer - 7 x 15 cm - Tiroir de rechange

Descripción del modelo 3D

Invariably, I always shatter a few of these little clear plastic drawers from those parts cabinets.

This is a printable version of at 15 cm by 7.2 cm plastic drawer, with adjustable dividers and an option for a clear front window

I made the transparent front window(28 x 68 mm) from an old CD/DVD case. They are hard to cut without shattering, so I scored it deeply with a sharp blade first. Other more flexible clear plastics would be easier to deal with!

If you just want to 3D print a facade or partition instead, there are two simple STL files that you can use.


We build 3D printers!

I've been following the RepRap project since about 2008, and building 3D printers since 2011. We started with a Techzone Mendel, and then I used it to print the parts for a Prusa version 1 which morphed into a verison 2. I used that machine to print up a pile of Prusa i3 parts. The cycle just keeps going!




Creaciones similares

Añadir un comentario