WE HAD RELEASED NEW VERSION:
Use this bird feeder with 2 sided adhesive dual lock tape on your window. Put it in exterior. Not like on photo :) Add perch, plate, and some seeds inside. Now you can watch birds from 10 cm !!! Please, make some photos and share it here, if you will catch some eagles.
Additionaly use some old iphone with presence app by: http://www.peoplepowerco.com/products/ glued on window, and use it as photo trap.
for binding on window use this: http://www.g3.cz/katalog/suche-zipy-3m/dual-lock/3m-suchy-zip-dual-lock-sj3550
Its better then 2 sided tape, because it reduces movement caused by tempreture.
We had reports about some bird feeder crashes when normal 2 side adhesive tape was used. No more reports with dual-lock.
If you are going to attach bird feeder above some public place, be sure to add some silon wire connected with bird feeder and your window, which will hold bird feeder in case it will glue out of the window.
If you will print this Bird feeder, instal it on the window, make some photos, send it to us at: email@example.com
We will generate unique serial number for you, and you will gain acces for registration here: http://printednest.com/community
You will be marked as open source branch of our project.
We are proud, we can share this with you! Be printed!
Printed with: MAKERBOT REPLICATOR 2
Filament: http://www.formfutura.com/3mm-wood-filament-laywoo-d3.html and classic PLA.
PLA and LAYWOO-D3 stick together, no glueing necessary.
Use only one material, if you like.
Infill: 10 percent
We are team of architects, designers and graphic artists who explore and develop possibilities of 3D printing technology as a way of developing a product which is constantly evolving and being perfected based on errors of previous prototypes, much as living organisms are.