Ir al contenido

6 Plant Modular Herb and Spice Planter

Descripción del modelo 3D

This modular spice and herb planter is another way to cultivate your own kitchen garden. This is our next entry for the #CountertopChallenge. With this design, you can stack planter stands and planters to achieve a terraced garden in your kitchen as big as you like. The planters are available in two styles, one with with drain holes and one without. The drain holes will dispense excess water into the planter underneath, of it placed at the edge of a sink, into the sink.

Parámetros de impresión 3D

Print with 10% infill and 3 shells. We recommend sealing this before use. We also recommend printing the planter stand with brims, and the planters with helper disks around the parameter to prevent warping.

It would be a good idea to place a piece of screen inside the planters covering the drain holes to prevent soil loss as well.

Print out multiple stands and glue them together. Glue stand to the bottom of planter to raise to necessary height.





Creaciones similares

Añadir un comentario