Skip to content

RS1: Cargo ship

3D model description

A simple model of a cargo ship for FDM and other technologies. The ship can float, but if it is made of PLA filament and you fill it with water, it will sink. The model has several individual parts which could be put together with the rest of the model or removed, so you can see inside the model. This ship has no interior equipment. The model has no real pattern, it is my own design.

3D printing settings

It can be made by FDM technology, but there are some bridges. The model contains thin walls, so I recommend you to enlarge the model size as much as possible. It was tested scaled to 132% size on the Prusa i3 printer putting it diagonally on the printing bed. Remember to keep the same scale of all model parts. It is better when the lines of the first layer are parallel to the direction of the ship movement. You can change color of the filament when printing individual parts to achiave a more realistic-looking model. You can also use some flexi filament to print the plugs, which can fill the holes between individual chambers.
The model in the gallery photos has this settings: scale: 132 %, layer height: 0.25 mm, extrusion width: 0.6 mm, hull: red + black + white PLA, cover: white PLA, funnel: orange ABS





Similar creations

Add a comment