Skip to content

Caution friends, this is not a private messaging but a public discussion thread. It is a place of exchange, thank you for being courteous and respectful. Any commercial or malicious solicitations will be removed. Have a good discussion!

Write your message:

6 comments

hi there! would you be able to do 1 for the ROKPRESSO bottomless portafilter? all it requires is a slight expansion of the top holes...

Hola,
these were printed in ABS at 110% scale with a 0,4mm nozzle. After treating them with acetone vapor, I glued them together with some acetone. However I changed the design recently to make them print in one piece in an upright position, which makes for a much more beautiful appearance (but also requires a 0,2mm nozzle and some support). Unfortunately the update didn't get synced to cults (I do all the uploads on thingiverse) therefore you can't find it here... and I still have to upload pictures of the immaculous newer earrings. Here's the link to the updated versions with some more printing instrucions: https://www.thingiverse.com/thing:3399093

Hola, como, lograste el acabado de los aretes con forma de hoja??

Hi,
sorry, I don't know what you mean. The model is free already.
cheers,
Josef