ravamunk
Has anyone had a successful print of this? (SMALL DOOR CUT-STONE FOR OPENFORGE AND OPENLOCK) if so what on and what settings? I and a friend of mine have both tried with no luck at all.
- 0 likes
Caution friends, this is not a private messaging but a public discussion thread. It is a place of exchange, thank you for being courteous and respectful. Any commercial or malicious solicitations will be removed. If you mention a particular design, feel free to add the link or the design title in your post so that the conversation can be properly directed. If you want to attach pictures to your post, feel free to upload your images to a free online image hosting service like Imgbb and copy/paste your image links into your comment. Have a good discussion!
Write your message:
1 comment
ravamunk
Sorry for the extremely late reply. I originally published this on thingiverse and don't think to check here often. This is one of my earliest models and a bit rough. I've successfully printed this on an Ender 3 using the default profiles in Cura using tree supports set to touching buildplate. It might print without support with the experimental bridge settings turned on but I haven't personally tested that.
- 0 likes