Skip to content

Caution friends, this is not a private messaging but a public discussion thread. It is a place of exchange, thank you for being courteous and respectful. Any commercial or malicious solicitations will be removed. If you mention a particular design, feel free to add the link or the design title in your post so that the conversation can be properly directed. If you want to attach pictures to your post, feel free to upload your images to a free online image hosting service like Imgbb and copy/paste your image links into your comment. Have a good discussion!

Write your message:

37 comments

Hi there, have purchased yout Ferrari 250 files (engine, gearbox and shifter). What is the scale for these? I want to print in 1:24

Hi, if I remember correctly it should be 1:10, you can resize the scale from your print slicer.

MOTABAS.

bonjour peut on imprimer avec du pla merci beaucoup

J'utilise généralement une imprimante à résine, mais pour l'impression FDM (filament), le PLA est définitivement le meilleur choix.
MOTABAS.

Ciao, mi sapresti dire in che scala è per favore? Mi sembra circa 1:12 se non erro... grazie

Hi, roughly the scale is 1:10, however you can resize it from your print slicer.

MOTABAS.

A thousand thanks.
MOTABAS.

bonjour jolis moteurs .vous est il possible de faire un moteur de scania v8 pour des camions tamiya rc 1/14 .merci d avance cordialement jp

Hi, I have been wanting to make a SCANIA V8 engine for a while, visit my channel often, I'll do it soon.

MOTABAS.

Hi, can you tell me what scale Mustang engine and supercharger are? Looking for something to print at 1/25 scale.

Hi, if I remember correctly it should be 1:10 scale, however you can change the scale ratio on your print slicer.

MOTABAS.

Greetings and thank you for creating this transmission engine. From the measurement, I think the model is drawn in 1/8 scale, am I right? I'll see how the print comes out, but the files look great. For example, could you draw another gearbox based on this design and Tyrrell modified it for his 1982 model 011? I could give you pretty good pictures. I look forward to your next job. Igor Zervan 430744@gmail.com
https://ibb.co/GFXKG9g
https://ibb.co/qBxqHj3
https://ibb.co/GtP7t5B
https://ibb.co/f0K0vG1
https://ibb.co/xH9CV7b

Hi Igor, I can try, I would need more photos and in particular photos of the complete and assembled gearbox.
MOTABAS.

Hi Cevert73, I'm working on your Tyrrell gearbox, I need the photos of the coupling flange between gearbox and engine, do you have any photos?
MOTABAS.

Hello, friend! I bought the 250 engine + gearbox and I need the scale print. Can you tell me, please? Thanks

The person who is printing explained to me that he is finding difiiculty with the correct size. Since there are many parts, he's affraind to print them individually and at the end they don't match. So he required me the scale. Or if have other way to solve this..

It does not have a perfect scale ratio, the original one is around the 1: 8 scale, however it is possible to scale it from the print slicer, I have never had compatibility problems. It is obvious that if you print with particularly small formats you will lose details due to the complexity of the project.

Hi,
What is the original scale of the Miura engine and muffler? Thanks

Hi, thank you for purchasing the LAMBORGHINI MIURA engine, it does not have a perfect scale, however around 1: 8, it can be scaled to your liking on your print slicer.
If you need help, I am always at your disposal.

MOTABAS.

Thank you! I want to print it at 1/24+- scale. Don't know if there is an "easy" way to join parts before printing.

I can try to do it, give me a few days and I'll let you know.
MOTABAS.

Hi, I made the file of the Lamborghini Miura engine in 3 parts (engine + exhaust + exhaust) I can't guarantee it will work, test and let me know.
You should receive a warning message from Cults3d in a few hours.

MOTABAS.

Thank you! I printed it and it came out good after a second try. I will send you a couple of photos soon!
Hope you can do that for the Delta S4 too!

Hi, of course I can also do it for the LANCIA DELTA S4, it is possible to create a simplified project consisting of a few parts.
If you need let me know.

MOTABAS.

If you could do that it would be great, for the S4 and maybe for the Alfa V6. I think it would work really well as 3-piece, for 1/24 scale!

I can simplify the projects using fewer pieces, it is clear that the detail decreases, as far as the scale is concerned you can scale the project as you like from your print slicer, if you are interested let me know.
MOTABAS.

I'm going to buy the S4 engine + extras once i get home. Yes some details are lost, but some internals are not needed this way. Thank you!

Okay, as soon as I'm ready I'll let you know.

MOTABAS.

Hi, the LANCIA DELTA S4 project in monoblock version is ready, contact me privately.

MOTABAS.

Ok! I'll contact you on Facebook. Name is Alex

Ok, I wait for you.
MOTABAS.

Bonjour
Sympa vos créations
un diffuseur pour Z1 forfaster 1/8 serai top
bonne journée

:-) Un diffuseur pour le Z1 ? quel modèle est le Z1 ?

MOTABAS.

Thank you! My email is scalemotorlw @ gmail.
com I'm glad you were able to see that. If you see his posts on the group, he has a few models from other people and one or two others of yours, I believe!

:-) check your email.

MOTABAS.

  • 1 like

Hi friend, interesting, thanks for reporting.

MOTABAS.

  • 1 like

HI CAN YOU MAKE A TUNNEL RAM INTAKE for your 427 ford engine for to 4 barrels carbs a high rise one

Hi, can you send me a sample photo?
MOTABAS.

HOLA AMIGO.
VI UN PROBLEMA EN SU DISEÑO .
EL SOPORTE SUPERIOR TIENE POCA UNION Y NO CONSOLIDA UN BLOQUE PARA PODER FUNCIONAR.

hola amigo, como te puedo ayudar? que modificacion necesitas? Puede ser útil una barra más grande?
MOTABAS.

LA PIEZA MOVIL SUPERIOR , NO TIENE UNION ENTRE SI. AL IMPRIMIR SE SEPARA EN 3 PIEZAS, NO SE COMO PUEDO GACER LLEGAR UNA FOTO DE ELLA.

SOLUCIONADO , ERA UN ERROR DE CURA . DESISTALE E INSTALE Y FUNCIONANDO, GRACIAS

Perfecto, problema resuelto, si me necesitas contacta conmigo :-)

MOTABAS.

Hi, thank you for your congratulations, of course, here are the WEBER 38/36 DCN carburettors at the following link:

https://cults3d.com/en/3d-model/gadget/weber-36-38-dcn-carburetor

I suggest you also consider the FERRARI 250 GTO engine, it is very nice, probably more beautiful than the gearbox.

if you also buy the 250 GTO engine free I also include the high resolution gearbox turret :-)

MOTABAS.

  • 1 like

Thank you! I will consider the engine. I am building a 1/24 model on my YouTube channel (Scale Motor Hobbies) I will be sure to mention where I got the files from as they are excellent!

Thanks, it's very kind of you.

MOTABAS.

  • 1 like

I went ahead an got the engine mate! Will be printing this evening!

Thanks, you'll see you'll like my FERRARI 250 GTO engine.

Now the LAMBORGHINI COUNTACH engine is almost ready.

MOTABAS.

  • 1 like

Hi there! Excellent work, my friend! Would you be interested in selling the model for the 250GTO carbs by themselves?

Thank you!

Hi, thank you for your congratulations, of course, here are the WEBER 38/36 DCN carburettors at the following link:

https://cults3d.com/en/3d-model/gadget/weber-36-38-dcn-carburetor

I suggest you also consider the FERRARI 250 GTO engine, it is very nice, probably more beautiful than the gearbox.

if you also buy the 250 GTO engine free I also include the high resolution gearbox turret :-)

MOTABAS.

Hi, I couldnt find the information : although you wrote that the model is scalable, could you tell me the required build plate size for the largest print as it is currently proposed ? Many thanks

Hi, which project of mine are you referring to?

I'm so sorry, I thought the message was automatically linked to the design I was talking about. It is the Ducati Panigale 1199 engine.
Manu thanks

Hi, no problem, the platform for Ducati Panigale engine you see in the photo is about 10x10cm, however you can decide to print the engine with a larger or smaller size.

MOTABAS.

Thanks a lot for your super quick response !

Thanks to you, it was my pleasure.
MOTABAS.

Salut

Top le moteur de miura je suis en plein montage, si tu veut des photos c est avec plaisir,

Tu peut m envoyer en mp ton mail que je t envoi les photos ;)

J'y ajoute les fils de bougies, quelques vis, salissure du moteur ....

Bonjour, bien sûr, vous pouvez m'envoyer les photos à cet email motabas@tiscali.it
vous pouvez compléter votre moteur LAMBORGHINI MIURA avec ce silencieux d'échappement:

https://cults3d.com/en/3d-model/gadget/lamborghini-miura-exhaust-muffler

Bye.

MOTABAS.

what scale is it on the KIT SUPERCHARGER for Ford Mustang GT Eleanor

Hi, it doesn't have an exact scale, it's about 1:10, however the project is scalable to your liking .

MOTABAS.

Bonjour
Merci pour le suivi
Cordialement

Le plaisir était pour moi.

MOTABAS.

So I bought the lycoming engine for the Cessnas and what is the best way I can print the engine block

Hi, the best system is resin printing, it prints the parts inclined at 30/40 ° .

MOTABAS.

Hey how do you print the engine on the lycoming engine I bought from you

Hi, resin printing is the best solution for this engine.

MOTABAS.

May I have permission to sell prints of the miura engine?

Of course, you can sell the Miura engine prints, you cannot sell the digital project.
Bye.

MOTABAS.

You can complete your project with this:
LAMBORGHINI MIURA - EXHAUST MUFFLER https://cults3d.com/en/3d-model/gadget/lamborghini-miura-exhaust-muffler

Thanks.

MOTABAS.

UPDATE WAS SUCCESFUL THANK YOU GREAT STUFF!!

:-)

MOTABAS.

Je voie aussi que vous êtes très caler sur la conception des moteur, je recherche justement un bloc moteur pour adapté sur ma rc drift électrique (lipo) le mytique 5 cylindres turbo de chez Audi.
Auriez vous cela !?
Bien cordialement Johann Michel

Salut Johann Michel, j'aime beaucoup le moteur Audi 5 cylindres de l'Audi S1, mais malheureusement je ne l'ai pas prêt, je pourrais le faire mais j'aurais besoin de temps pour le faire.
Fais-moi savoir.

MOTABAS.