Skip to content

Caution friends, this is not a private messaging but a public discussion thread. It is a place of exchange, thank you for being courteous and respectful. Any commercial or malicious solicitations will be removed. If you mention a particular design, feel free to add the link or the design title in your post so that the conversation can be properly directed. If you want to attach pictures to your post, feel free to upload your images to a free online image hosting service like Imgbb and copy/paste your image links into your comment. Have a good discussion!

Write your message:


Hello, I'm from Russia and I can't buy a crossbow model! how can I buy it?

Hello, I just downloaded the Adderini file last night, as I was planning on starting the print this weekend, but whenever I try to download the file, the cults3d page just keeps loading and eventually times out. This is the first time purchasing files on cults3d and I'm not sure if I'm doing something wrong of if the website is just not working properly. I've contacted cults3d directly but they do not respond on weekends. Is there any other way to receive the files? Any suggestions? I really wanted to start this print yesterday, I had it all planned out.

Hi JAAANIK, thanks for your adderini, I've printed and assembled, I like it so much!
and, I want to try the stock of Lupus mods, a question : I think the STLs should include the AR stock "LWC_adderini_buttstock_shaft_Left_side" ? however, there is only "LWC_adderini_buttstock_shaft_right_side" in....
will you please check the STLs of Lupus Mods? is the left one lost ?

Any openings for beta testing v3? I would like to help contribute.

I would like to print the adderini for commercial use on a small scale and all locally for friends and a few others
Was curious if you offer that ability maybe per quantity sold or something
I like to be honest and pay designers

Request a refund, but in my country (Poland) this kind of thing is illegal. And obtaining a permit is time-consuming and expensive. Unfortunately.

Prośba o zwrot przelewu, jednak w moim kraju(Polska) tego typu rzeczy są nielegalne. A uzyskanie pozwolenia czasochłonne i kosztowne. Niestety.

I bought these files, but after a while I am again offered to pay for it.

My bank card don’t work. But I really want to print this awesome model. It will be great if you can accept Alipay or WeChat.

Hello, I am having a problem where in the fully cocked position the trigger latch doesn't move forward enough to latch onto the string thus it can't be cocked , do you have a solution for this?

hello! can it handle the ek cobra r9/rx 59kg limbs?

Easy to caulk the ADDERINI bow pistol?

Hallo Jaanik,

vielen Dank für deine tolle Arbeit. Ich freue mich darauf vieles von dir zu drucken.

Ich habe momentan ein paar Probleme bei der Adderini V2 und zwar z.B. bei dem Magazin Body am äußersten Ende wo die letzte Schraube vorne hinkommt, Dort wurde in der Luft gedruckt und somit war es ein Drucksalat an der Stelle ( sonst wurde alles super gedruckt). Soll ich an der Stelle, da sie in der Luft hängt ein paar manuelle Supports setzen oder gibt es eine andere Lösung?

Außerdem ist mir aufgefallen, dass in den Löchern wo die Schrauben hinkommen, das Material sehr sehr dünn ist und ich sogar die Drucklinien im Kreis (Schlangenlinien) sehen kann. Ich denke dass das Material definitiv zu dünn ist, damit dort Schrauben einen Halt haben. Habe ich irgendeinen Einstellungsfehler gemacht? Ich druck bei 230 grad Nozzle 80 grad Druckbett und ich drucke mit XPETG. Super hartes Material und alles andere wurde super gedruckt bei diesem Teil. Ein paar leichte Strings habe ich in den Rille des Magazins aber die kriege ich leicht weg.

Irgendeine Idee wie ich das in den Griff bekomme mit dem Druck in der Luft und dem Material für die Schrauben was zu dünn bei mir ist.
Wenn du Interesse hast kannst du mir auch per Whatts App antworten 015738933036

Vielen Dank und netten Gruß Josh Bianchini

Hallo Jaaanik

mein Kumpel und ich überlegen uns, ab und zu eine fertig montierte Miniadder V2 zu verkaufen.
Für jede verkaufte Miniadder würden wir dir jeweils die 12,50 € Lizenz Gebühren überweisen wäre das okay für dich?
Oder stellt das ganze rechtlich ein Problem dar?

Gruß Marko

Please contact me by email.

  • 1 like

Das wollte ich, aber wo finde ich deine Mail Adresse ?

𝐇𝐢 𝐉𝐚𝐚𝐚𝐧𝐢𝐤!

First of all, I'll go ahead and express my and the 3D Printing community's massive thanks to you and those you collaborated with, for sharing such a fantastic toy with us!

That said, could you please advise me on this issue with the 𝐌𝐢𝐧𝐢𝐀𝐝𝐝𝐞𝐫 𝐯𝟐? Everything seemingly printed and assembled well, but the track for the 𝐌𝐚𝐠𝐚𝐳𝐢𝐧𝐞𝐑𝐚𝐢𝐥𝐬 snapped right off the first time I cocked it. When I slide my drawn bow into the 𝐁𝐨𝐰 𝐀𝐝𝐚𝐩𝐭𝐞𝐫, it also cracks, and I've also tried making the adapter in 𝐏𝐋𝐀+ and in 𝐏𝐄𝐓𝐆, with the same result.

My big question is, do you have materials you'd recommend for these parts that need to withstand such force? By the way, I have 𝐏𝐋𝐀-𝐂𝐚𝐫𝐛𝐨𝐧 𝐅𝐢𝐛𝐞𝐫 and 𝐏𝐄𝐓𝐆-𝐂𝐚𝐫𝐛𝐨𝐧 𝐅𝐢𝐛𝐞𝐫, but haven't tested them yet. I'm not sure if that would be too rigid, making them even more likely to break instead of bend?

I'm using a brand new 𝐁𝐚𝐦𝐛𝐮𝐋𝐚𝐛𝐬 𝐗𝟏 𝐂𝐚𝐫𝐛𝐢𝐧 at standard speed. For reference, I'm using the same 𝟖𝟎𝐥𝐛 𝐂𝐨𝐛𝐫𝐚 𝐁𝐨𝐰 𝐀𝐫𝐦𝐬 recommended in the Instructions PDF.

By the way, unrelated, to avoid issues with the internal zigzags, I printed the whole Pistol Body and the Front Cocking Lever with 100% infill, and they' re super sturdy!

I'm not a fan of the thinning of the rails that Faramir did. In my original design, they were much thicker and therefore stronger. PLA and PLA+ are OK for this toy.
Printing too fast may be a problem:

Aaah, thank you so much for the insights!

I'll try printing the rails reeeeeeeeeeeeeeeeal slow, on the "silent" setting. Merci!

Floodlight / Work Light - LED 10W is 12v ?
does it need adapter from 20v to 12v?

It has build-in buck converter. Works with 20V and 12V.

hello, I was wondering if there was any update on the V3 Mini Adder? Will it be available for purchase anytime soon or did you decide not to move forward with its release? thanks for all your time and hard work!
Payment has been successful
Unable to download

Try again download the files.

Hey Lukasz, do you have an update on when the v3 prototyping is done or is it someone else working on the next version? Thanks for everything!

Hallo Janik,
sry, ist eine Rückerstattung möglich?
Habs jetzt 2x probiert, die Seitenführungen sind etwas zu dünn, brechen leider immer nach kurzer zeit, oder es wölbt sich beim laden nach außen, und der Schlitten springt aus der Führung; mit wenig Rubberpower hält es, macht aber keinen spaß mehr.
Habe jetzt 3 Wochen und 70€ verdruckt, möchte kein 3. mal mehr.
Danke LG


Hello, I bought the mini adder 2 from the
JOERGSPRAVE cults profile, but he toke it off from his profile.

I would like to have acces to the updated versions you upload and would like to know if there could be any way i could get acces to them

Thank you so much!

Please contact me by email.

Where can i see your email?

I print the miniAdder v2 and i have a little problem :
My bow has a thickness of 6mm an the Bow-Adapter a 5mm thickness.
It is possible to make a 6mm bow-adapter.
I know it's a Faramir's design but i can't find him.

Hello, I've just bought the sketch files to 3D-print the "Adderini - 3D Printed Repeating Slingbow / Crossbow Pistol" and I have a question- I'd like to send the relevant files (only) to the slingshot version for printing, can you please direct me to the exact files/folder to send for getting a quotation? because when I've sent the whole folder as it appears now on the site for downloading it gives me an average quotation of 8,000 $ for the work.. Thx, Erez.

Just follow the PDF manual pages: 4, 6-9.

please excuse me, but I didn't understand.. would you please send me this manual that I'm not sure I've got?

Hello JAAANIK, i am trying to print the crossbow but the left side of the front (220x220) does not fully print, i have tried 3 times and even sliced it with different programs, the right one did work. I use a creality CR10S. Any idea on what might be going wrong with the file? I have put the settings the exact way as told in the guide.
Thanks, Randy

What do you mean by "does not fully print"? Either it prints or it doesn't?

I think I already found the problem, it was not the files. My printer had a leak wich caused it to print only a part or nothing at all.

Hello JAAANIK, I purchased the SIL bow magazine model today. PayPal payment was completed. But I cannot download the file. Any suggestions? Thanks, Max

ve just received confirmation today. You should be able to download the files.

Hello I have two questions, can I use it with a 50LBS bow?

After 5 shots my bowstring has elongated and is no longer gripped when loading through.

Is this normal?

You have to twist the bowstring several times. This is normal in the beginning.

100% secure payment with PayPal or Credit Card.