Skip to content

Caution friends, this is not a private messaging but a public discussion thread. It is a place of exchange, thank you for being courteous and respectful. Any commercial or malicious solicitations will be removed. If you mention a particular design, feel free to add the link or the design title in your post so that the conversation can be properly directed. If you want to attach pictures to your post, feel free to upload your images to a free online image hosting service like Imgbb and copy/paste your image links into your comment. Have a good discussion!

Write your message:


j'ai acheté le fichier cœur fête des mères et après plusieurs tentatives d'impression cela ne fonctionne pas je suis un peu déçu auriez-vous une solution à m'apporter

I need to know exactly what are your issues. Please send me pictures to my Instagram @somos_makers_ig

Bonjour j'ai vu sur votre Instagram le modèle luigi et Mario mais je le trouve pas sur cults

Mes excuses pour la confusion précédente. Si certains de mes designs ne se trouvent pas sur la plateforme Cults, c'est parce que je les publie exclusivement sur Patreon. Patreon est une plateforme d'adhésion où je partage du contenu exclusif avec mes abonnés, y compris des modèles d'impression 3D qui ne sont pas disponibles ailleurs.

En rejoignant ma page Patreon, les abonnés ont accès à ces designs exclusifs, ainsi qu'à d'autres avantages supplémentaires que j'offre à ma communauté. Ces designs spéciaux sont une façon de remercier et de récompenser le soutien de mes abonnés les plus fidèles.

Si vous êtes intéressé par l'accès à ces designs exclusifs, je vous invite à rejoindre ma communauté sur Patreon. Vous y trouverez une sélection supplémentaire de modèles d'impression 3D qui ne sont pas disponibles sur Cults ou d'autres plateformes publiques.

hi habe die Giraffe heruntergeladen, aber bei mir ist nur das model mit der sonnenblume drin. Der mit der mütze und der andere fehlen???

Hello, the model with the hat is for Patreons only, but Ive seen you have purchased some of my models, so, please send me your email to my instagram as a personal message to @somos_makers_ig and I will share the file with you.


I used 3 perimeters and 10% infill. I included a picture with my settings in the same post.

hello I allow myself to write to you do you think it would be possible to put 2 first names on it?

Hello, sorry but I do not understand your doubt. Can you explain me a little more please?

Best friend
I have already purchased many of your works and printed them perfectly,
I asked you a while ago if you could make a giraffe, the new one you posted is very beautiful, I just think the neck is a bit short, can't you make it a bit higher,
greetings from Belgium
(this has been translated via goog

J'adore ce que vous faites bravo.

J'ai un petit soucis au niveau de intérieures le cœur. Le reste est parfait ;)
Je suis sur Prusa et j'ai une Kobra Néo

Hello, can you send me a picture to my Instagram @somos_makers_ig please

bonjour je voudrai savoir si il faut mètre le remplissage de l'impression a 100 pour 100

Hello, which file are you asking for that doubt?

Where is the one with the hat all i got was without it.

Hello, send me a PM to my Instagram @somos_makers_ig with your email please

Both are the same not with a hat on

Erreur fichier ne peut pas être téléchargé sur cura

I,ve done the tests using Cura and Prusa slicer and all worked perfect. Should be something with your Cura. Please send me a message to my instagram to try to help you solve this issue. @somos_makers_ig

Bonjour, je voulais voir avec vous, je recherche un koala dans le même Style que l'éléphant le lion le lapin l'ours, est se que ça serait possible pour vous den réaliser un svp? C'est pour le baptême de ma fille.
Merci d'avance

I have a koala on the list, I will try to make it before others in my list

Super c'est super gentil hâte de l'avoir et de l'imprimer merci beaucoup

bonjour, pouvez vous me le dire quand vous aurez fais le koala svp c'est pour le 22 juillet merci beaucoup. cordialement

impossible d imprimer le fichier ne marche pas

Hello, what issue are you having? please contact me on instagram @somos_makers_ig to give you some advice

Hi , Can you share cap too :-) Thanks
My name is K ondor :-)

Hello, send me your email to my instagram @somos_makers_ig please

Hello can you say me how many weight of PLA need for the
valentine's teddy bear

Hello, the teddy bear uses about 130gr but will depends on your settings.

Hello there! I just bought some of your designs. They are lovely. I will start printing it today.
I have a question and hope you can help me. I saw your designs in a Facebook group and in that post there were a Mario (printed in red) in the background. I couldn't find the STL on your page.
Thank you!

Hello, first of all, thank you for your support, that means a lot for me. About Mario, maybe you know I have a Patreon page, there I post some exclusive models and Mario is one of those models. This is the link in case you want to take a look

Awesome. Just became a patron! Lot's of good stuff. Congrats!

The lion is a beautiful stl as always, my daughter is going to lov it

Hope she loves it. Thanks again for your kind support and If you want to have a direct chat for any doubts, comments or suggestions feel free to send me a pm to my Instagram @somos_makerw_ig.

  • 1 like

I keep having issues with the hearts and flowers vase. Seems like the section under the bottom of the opening is printing in the air and is causing it to mess up my print.

Hello, can you send me some pics to my instagram to see whats going on? @somos_makers_ig

Mine was with cura and the 190mm model at layers 25 to 30. I used the 250mm model and just scaled it down to 190 no more problems.

Are you able to upload the Fuzzy Designs not in a .3mf format? I have a P1P and using Bambu Studio, I am not able to open the files at all while keeping the fuzzyness.

Hello, you can open the 3mf files with Bambu Studio and then apply the fuzzy skin to the parts you want. In process tab select Objects, choose the part you want and under Others tab, Special Mode, Fuzzy Skin, Outer walls use 0.8 as point distance and 0.3 thickness. If you want less fuzzy skin effect reduce those values. For a personal assistance you can write me to my instagram at @somos_makers_ig

leider kann ich die datei in cura nicht drucken zeigt n fehler an

Hello, while I made my design i test them on prisa slicer and in cura. I have succed with all of them, unfortunately I had seen some people having issues with an internal cura bug that send an error bit it's a cura issue. What I've seen also is that making a new printer profile this problem use to be solved. Please feel free to contact me on Instagram @somos_makers_ig for more doubts.

so i bought this and ive tried slicing it several times and it says slicing failed file corrupt every time.

Hello, are you using cura? If so, sometimes cura gives failures with some files die to internal bugs. How I've solved this is making a new printer profile . Please write me on Instagram @somos_makers_ig to try to help you.


Hi, Mario was released only on Patreon

bonjour je voudrais savoir si c'est possible d'avoir le fichier mario sur culte 3D parce que j'arrive pas à le trouver

Hello I printed 2 pcs , Vase.. first 5% infil your original print setting, but The stem of the flower broke inside the little heart. Second vase printed 10% infil slovly print speed, but broken the stem of the flower too. What is the problem? Thanks

Hi, maybe your nozzle is hitting the steam while it moves, make sure to have Zhop / zlift activated with at least 0.2mm. More doubts you can send me a pm to my Instagram @somos_makers_ig

I uplload photos from settings. But z hop was active 0.2. . So can i modify 0.:3?


You can use 0.3 and also reduce speed and increase perimeter to make it stronger

Thanks i will try

cool,thank you

  • 1 like

Hey you ever think on doing a turtle and some babies my wife would love it if you guys design something like that

Hi, yes, i have a turtle in my to do list.