kariem2k
Hi, Does any of the saltwater lures have rattle in them? I am asking because I am going to fish on a murky beach. Any recommendation?
Thank you
- 0 likes
Caution friends, this is not a private messaging but a public discussion thread. It is a place of exchange, thank you for being courteous and respectful. Any commercial or malicious solicitations will be removed. If you mention a particular design, feel free to add the link or the design title in your post so that the conversation can be properly directed. If you want to attach pictures to your post, feel free to upload your images to a free online image hosting service like Imgbb and copy/paste your image links into your comment. Have a good discussion!
Write your message:
25 comments
kariem2k
Hi, the lures have no special chamber for rattles. But you can just put 2 small glass bbs into the air chamber. That should not affect the Action.
- 1 like
Does the saltwater lure bundle require supports? Or print as with infill settings?
- 0 likes
Hi, yes they need support. The right infill is shown on the pictures for each lure.
- 0 likes
Hi. Auf dem Bild, wo der Köder geteilt ist sieht man das Innenleben.
https://cults3d.com/de/modell-3d/gadget/heavy-duty-saltwater-fishing-lures-collection-popper-stickbait
Den dicken Draht (wie dick? 1,5 mm?) und in der Mitte ein Bauteil, was auf dem Draht aufgefädelt ist und wo der mittlere Haken dran befestigt wird.
Wie nennt sich dieses Teil?
Danke!
UND ÜBRIGENS: Coole Sachen, die Du hochgeladen hast.
Sebastian
- 0 likes
Hi, erst mal vielen Dank!
Das bauteil ist ein kugelgelagerter wirbel.
Der draht ist bei 100% größe immer 1,2mm. Auf einem der bilder sieht man was das für ein draht ist.
Dominik
- 0 likes
Hi. Auf dem Bild, wo der Köder geteilt ist sieht man das Innenleben.
https://cults3d.com/de/modell-3d/gadget/heavy-duty-saltwater-fishing-lures-collection-popper-stickbait
Den dicken Draht (wie dick? 1,5 mm?) und in der Mitte ein Bauteil, was auf dem Draht aufgefädelt ist und wo der mittlere Haken dran befestigt wird.
Wie nennt sich dieses Teil?
Danke!
UND ÜBRIGENS: Coole Sachen, die Du hochgeladen hast.
Sebastian
- 0 likes
I was wondering if it’s possible for you to change the lip to more of a shallow running lure? Around the 4-5’ deep mark. Also, is it possible to get a version that is smooth with no scales?
- 0 likes
Hi, sorry, but i don't know what lure you talk about?
- 0 likes
My apologies! It’s the crank bait fishing lure. https://cults3d.com/en/3d-model/gadget/crankbait-fishing-lure-domi1988.
- 0 likes
No problem ;)
I am really sorry to let you down, but i allready tryed different lips and weights, but the version i uploaded is the only one that has a good action. Here you see some prototypes with different lips.
https://picr.eu/i/bE23S
For your other question, there are allredy versions without scales.
- 0 likes
Hey can you submit a head that doesn't use a 2nd piece to cover the bb holes. I can do it with a pause at layer height and it will look better.
- 0 likes
Sure! do you prefer the hole for the bbs to be closed or to be open (so you can add the bbs after the print and close it with epoxy)?
- 0 likes
Can you send me a mail adress? i don´t want to upload another 4 heads to my design, or it gets to complicated for other buyers.
- 0 likes
Tylerbcox92@gmail.com
You can close the holes off I can pause the print where needed in the code. Thank you!
- 0 likes
muy buenos trabajos hermano, seria opción un molde para fliping jigs o football jigs de 1 onza o 3/4
- 0 likes
Thank you!
- 0 likes
Was wondering what size hooks your using on the swim baits? Thanks for the awesome file!
- 0 likes
Sorry i didn´t answer. I did not get a notification. I use size 2 treble hooks.
- 0 likes
Bonjour concernant le fichier whopper plopper v2 . Quel taille faut il pour le swivel ?
- 0 likes
Sorry, i don't know. I have a box with different sizes and just test which one fit.
- 0 likes
do you make fishing designs that I can make and sell?
- 0 likes
do you make fishing designs that I can make and sell?
- 0 likes
what size at 65% scale for the Zander walleye stainless eye hooks, stainless steel spring wire, eyes and balls?
- 0 likes
Hi sr..
I want to know if you sell this molds that shows i the pictures...
Any info please let me know.. im very interest in buy some of them.
Angelyjessie@yahoo.com
- 0 likes
Is it possible to order without the lure lip?? I have my own lure lips that i would use. LG
- 0 likes
what lure model do you mean?
- 0 likes
Hello wanted to ask if you could share the world's STL file in four files.
So that I can print them larger.
Kind regards
- 0 likes
its a litophane, so i cant cut it, sorry
- 0 likes
bonjour, je n'arrive pas a imprimé le headbanger, il chute constamant dans le 1er tier, faut-il mettre des support ? et a combien de degré les mettre ? j'ai lancer un print a 15 degré de support sur cura, je verrais bien, mais je sèche un peu
- 0 likes
i am sorry, but that sounds like a problem with your printer, not with the model. this lure doesn´t need any support. so you should improve your print settings.
- 0 likes
Hello,
Congrats for your job!!
Did you inserted some bearings inside the knobs?
Best,
- 0 likes
Thank you! Yes you need to use the bearings from the original knob.
- 0 likes
tu gère la fougère
- 0 likes
Sorry, but i don´t speek french. And the google translation doesn´t help.
- 0 likes
don't worry you are the best
- 1 like
Hello, good afternoon, a query I wanted to know how many grams is spent more or less on the lures and what printer do you recommend to make these types of lures or fishing things, I am from Argentina in advance, thank you very much.
- 0 likes
The plate gets screwed onto the big block. When molding, it creates the lip, that holds the sock on the heatblock. Look at the second picture the right sock. There you can see the lip it creates.
- 0 likes
Hi,
Thanks for making the sock mold available for the A20M.
I printed it but what is the small plate for?
How do I use it?
Thanks for help
- 0 likes
Sorry, but i dont understand french, and the google translator does not help.
- 0 likes
Salut, d'abord merci pour le partage de tes fichiers, mon frère m'a imprimer le leurre type headbanger, tu dit prévu pour les vis M2 , ou tu les achètes stp ? merci
- 0 likes
Bonjour, je viens récemment d'acheter une thinker s et je ne trouve pas et n'arrive pas a télécharger les profils des slicer, Ou est-ce que je pourrais les trouver ?
- 0 likes