Skip to content

Fish Soap Holder / Porte savon poisson

3D model description

Fish Soap Holder
Porte Savon en forme de poisson

Dimensions: 16,8 x 1,2 x 8,9 cm

3D printing settings

The most intuitive way is to print it flat on a FDM printer but if you really want the best finish, I'd recommend printing it vertically as shown on the picture.

I used Colorfabb XT red to print the object.
It took around 8 hours to print on my Ultimaker 2.
layer height: 0,2mm
perimeter shell: 1,2 mm
infill: 20%
printing speed: 2400mm/min
temperature: 240 deg C




Similar creations

Add a comment