This unique design looks like goo dripping off a standard 10″ clock. It works well with a clock available at Target. Model must be rotated by 45 degrees to fit on print bed.
Model is scaled up by 2540 x. You may have to scale down by .0393701 depending by your slicer software.
Recommended settings in slic3r:
0.20mm layer height
Make sure "gap fill" is same speed as perimeters (in slic3r 1.1.5 or later)
*Requires support material. Set overhang threshold to 5 degrees or more.
gCreate LLC is a Brooklyn, NY based 3D printing company that specializes in making its flagship product, the gMax Printer.