Skip to content

How To Make A Custom Poker Chip Using 3D Printer?

You are a big fan of poker games. It is always a daunting task to step it to get the chips. But, there is a 3D printer in your possession.
If you answered yes to all of these questions, especially the last question, then you are just right on course. Our goal here is clear and you are exactly who should be reading this article.
It gets more exhilarating when you discover that it is even a quieter way of making these poker chips when you use a 3D printer. The goal in clear terms is to deliver a guide to assist you in creating your customized poker chip using the 3D printer (the quieter way).
This way, you are rid of the hassles and worries that come with having to go out to get yourself a poker chip always. Now your 3D printer can just get you as many poker chips as you need. Not just that, you are provided with a customized poker chip. Sweet!
First off, we will walk you through the process of getting yourself the “Webbed Chip” using your 3D printer. For starters, the "Webbed Chip" comes in a hexagonal structure, with a cut out at the centre to enable air entry and airflow through it while you are it(the poker game)
Immediately after the “Webbed Chip” guide, we will get on to the second, the "Hollow Chip" This chip is half of the original complete product that you could use at poker games for real money and enjoy the created stuff. So, in this case, you would have to print two of it with a quarter inserted in the interior to bring about a denser feel.
Have a good read of this guide, and unearth the method of remaking your chips from start to finish. All you need to pull this off is a little mastery of 123D design.

The Making Of The Webbed Chip

  1. The Outline
    Outline a 50mm diameter circle. Draw out a horizontal poly-line to link up with the hexagon.

  2. The Hexagon's Radius
    Employ the polygon tool to develop a hexagon with a 4mm radius.

  3. A Line From The Core
    Draw a line of 1mm from the core of the lowest side of the hexagon.

  4. The Horizontal Line
    Draw a horizontal line measuring 2mm from the top of the 1mm line you had drawn.

  5. Mirror The Sides
    Make use of the control and click an icon to choose the sides of the hexagon, then the mirror tool will come in handy for you to mirror it over the 2mm line you just drew.

  6. Creating The Circular Pattern
    Specify which sides of the hexagon you just developed, you wish to work on. After this, make use of the circular pattern tool. The first hexagon's middle point should be selected as the centre point. After this, you can then alter the number of copies to make it 6.
    Draw a line of 1mm from the centre point of the lowest side of the lowest hexagon. Then, draw a horizontal line measuring 2mm from the endpoint of the 1mm line. After which you now choose the hexagon sides with the control and click, before mirroring them over the 2mm line.

  7. Working On The Sides Of The Hexagon
    Choose from the sides of the hexagon you just created, then utilize the circular pattern tool. Pick out the centre point of the initial hexagon as the new centre point. Then modify the number of copies to 6.
    Instantly, draw a line of 1mm which will similarly be 120 degrees from the other side of the hexagon. Take your measurement from a clockwise direction. Finally, make another line of 2mm from the top of the line you have just created.

  8. Mirroring The Hexagon
    Use the mirror tool once more to mirror the hexagon into the free area.

  9. Create Another Circular Pattern
    Use the circular pattern tool again on all of the 6 copies. Before you draw out a 17mm circle at the centre, and another circle of 39mm in the centre.

  10. Finishing Touches
    Erase the lines you have used for mirroring. Pick out all of the sketches made excluding the interior hexagons with the ctrl+click. Finally, thrust it out 6mm.

The Making Of The Hollow Chip

  1. Creating The Circles
    With the circle tool, draw out a circle measuring a radius of 50mm, create another circle of 37mm, before finally creating a 38mm circle.

  2. Thrusting Out The Inner Circle
    Thrust out the interior circle and the exterior ring to 3mm. Then, thrust out the circle in the middle to 2.5mm.

  3. Create Another Circle
    Create another circle measuring a diameter of 12.718x2mm

  4. Extrude The New Circle
    You end this by extruding the new circle upwards by 1.8mm

  5. Printing
    After you have completely modelled the file and finished them all, open the file then, export them to stl. Open the stl file in any preferred slicing software and print it out from there.

  6. Smoothening The Edges
    When you are printing everything, put in two quarters – a quarter for each part of the hollow chips– then stick the two parts together.
    If you have done all these steps for creating the poker chip, then there is no stopping you anymore! Enjoy a thrilling day out with your poker games!

Similar articles

How Do 3D Printers Affect The Gambling Industry?

In recent times, 3D printing has been in the business of refining and developing various industries globally. This is the case as it is of great use to these industries when they make use of 3D printers. The world of gaming and the gambling industry, in general, has not been left out as they have similarly advanced in different ways, all thanks to 3D printing,

Read more

3 Ways To Use 3D Printing For Gaming

The world of gambling and gaming, in general, felt a paradigm shift in recent times as several new waves of innovation took centre stage to the amazement of many major stakeholders. So, in no time, several things had changed mostly for the good as it became easier and more exhilarating to play these games using these technological innovations.

Read more